lkml.org 
[lkml]   [2013]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: tg3 v3.123 in 100Mbps Full-Duplex mode with autoneg off
From
Date
On Wed, 2013-01-09 at 08:03 +0100, Marcin Miotk wrote:
> 03:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5715
> Gigabit Ethernet (rev a3)
> 03:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5715
> Gigabit Ethernet (rev a3)

I tested on 3.7 kernel and it seemed to work. Bear in mind that you'll
lose auto MDI-X when both sides don't autoneg. Please provide the
following:

1. ethtool eth0 with a working kernel. I'd like to see the MDI-X
setting when it is working.

2. mii-tool -vvv eth0 with the non-working kernel.

Thanks.




\
 
 \ /
  Last update: 2013-01-15 01:21    [W:0.064 / U:5.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site