[lkml]   [2013]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/3] x86: enable common clk and add support for Lynxpoint clocks
Hi all,

The discussion that lead to this patch series starts from the below thread:

In summary, there is no point in adding a special case code to the drivers
in order to pass them a fixed clock rate, but instead x86 should just
enable common clk subsystem and take advantage of it.

This has been proposed before by Mark Brown but for some reason it has not
merged into x86 tree.

This series tries to do the same but in this time we have real users for
the clk API.

[1/3] Enables the common clk framework on x86
[2/3] Adds Intel Lynxpoint Low Power Subsystem specific clocks as platform
[3/3] Creates the platform device for the LPSS clocks driver if we find out
that the Lynxpoint LPSS devices are available.

This series is based on Rafael's linux-pm/linux-next branch because there
is a dependency to the ACPI scan rework by Rafael.

Please review.

Mika Westerberg (3):
x86: enable common clk on x86
clk: x86: add support for Lynxpoint LPSS clocks
ACPI: create Lynxpoint clocks if LPSS devices are found during scan

arch/x86/Kconfig | 1 +
drivers/acpi/scan.c | 36 ++++++++++++----
drivers/clk/Makefile | 1 +
drivers/clk/x86/Makefile | 2 +
drivers/clk/x86/clk-lpss.c | 99 ++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/x86/clk-lpss.h | 36 ++++++++++++++++
drivers/clk/x86/clk-lpt.c | 86 ++++++++++++++++++++++++++++++++++++++
7 files changed, 252 insertions(+), 9 deletions(-)
create mode 100644 drivers/clk/x86/Makefile
create mode 100644 drivers/clk/x86/clk-lpss.c
create mode 100644 drivers/clk/x86/clk-lpss.h
create mode 100644 drivers/clk/x86/clk-lpt.c


 \ /
  Last update: 2013-01-14 16:21    [W:0.106 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site