lkml.org 
[lkml]   [2013]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 10/14] PCI: tegra: Move PCIe driver to drivers/pci/host
On 01/10/2013 08:52 PM, Thierry Reding wrote:
> On Thu, Jan 10, 2013 at 05:48:46PM -0700, Stephen Warren wrote:
>> On 01/09/2013 01:43 PM, Thierry Reding wrote:
>>> Move the PCIe driver from arch/arm/mach-tegra into the
>>> drivers/pci/host directory. The motivation is to collect
>>> various host controller drivers in the same location in order
>>> to facilitate refactoring.
>>>
>>> The Tegra PCIe driver has been largely rewritten, both in order
>>> to turn it into a proper platform driver and to add MSI (based
>>> on code by Krishna Kishore <kthota@nvidia.com>) as well as
>>> device tree support.
>>
>>> diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c
>>> b/arch/arm/mach-tegra/board-dt-tegra20.c

>>> +static int tegra_pcie_enable_controller(struct tegra_pcie
>>> *pcie) +{ + unsigned int timeout; + unsigned long value; + + /*
>>> enable dual controller and both ports */ + value =
>>> afi_readl(pcie, AFI_PCIE_CONFIG); + value &=
>>> ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE | +
>>> AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE | +
>>> AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK); + value |=
>>> AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL; + afi_writel(pcie,
>>> value, AFI_PCIE_CONFIG);
>>
>> Eventually, we should probably derive the port enables from the
>> state of the root port DT nodes, so that we can disable some and
>> presumably save a little power. Also, I notice that the
>> nvidia,num-lanes property isn't implemented yet. Still, we can
>> probably take care of this later.
>
> Yes, the plan was to eventually derive the disable bits from the
> port status and setup the XBAR_CONFIG field based on the
> combination of nvidia,num-lanes properties.
>
> I assume we should simply fail if the configuration specified by
> nvidia,num-lanes is invalid?

Makes sense to me.

>>> +static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
>>
>>> + pcie->vdd_supply = devm_regulator_get(pcie->dev, "vdd"); + if
>>> (IS_ERR(pcie->vdd_supply)) + return
>>> PTR_ERR(pcie->vdd_supply); + + pcie->pex_clk_supply =
>>> devm_regulator_get(pcie->dev, "pex-clk"); + if
>>> (IS_ERR(pcie->pex_clk_supply)) + return
>>> PTR_ERR(pcie->pex_clk_supply);
>>
>> Oh, I guess the regulator_get() calls are already strict.
>
> Yeah, I think they can't return NULL, right? In that case I can
> just drop the extra checks in tegra_pcie_power_{on,off}().

It looks like NULL can be returned if !CONFIG_REGULATOR. The comment
in the dummy implementation implies that drivers should treat a NULL
value as valid regulator in most cases.


\
 
 \ /
  Last update: 2013-01-11 22:21    [W:0.094 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site