lkml.org 
[lkml]   [2013]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] gpio: vt8500: memory cleanup missing
Date
This driver is missing a .remove callback, and the fail path on
probe is incomplete.

If an error occurs in vt8500_add_chips, gpio_base is not unmapped.
The driver is also ignoring the return value from this function so
if a chip fails to register it completes as successful.

Replaced pr_err with dev_err in vt8500_add_chips since the device is
available.

There is also no .remove callback defined. To allow removing the
registered chips, I have moved *vtchip to be a static global.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
v2:
Remove global variable and use platform_set_drvdata instead.

drivers/gpio/gpio-vt8500.c | 51 +++++++++++++++++++++++++++++++++++---------
1 file changed, 41 insertions(+), 10 deletions(-)

diff --git a/drivers/gpio/gpio-vt8500.c b/drivers/gpio/gpio-vt8500.c
index b53320a..87e59b5 100644
--- a/drivers/gpio/gpio-vt8500.c
+++ b/drivers/gpio/gpio-vt8500.c
@@ -233,10 +233,12 @@ static int vt8500_add_chips(struct platform_device *pdev, void __iomem *base,
sizeof(struct vt8500_gpio_chip) * data->num_banks,
GFP_KERNEL);
if (!vtchip) {
- pr_err("%s: failed to allocate chip memory\n", __func__);
+ dev_err(&pdev->dev, "failed to allocate chip memory\n");
return -ENOMEM;
}

+ platform_set_drvdata(pdev, vtchip);
+
for (i = 0; i < data->num_banks; i++) {
vtchip[i].base = base;
vtchip[i].regs = &data->banks[i];
@@ -261,6 +263,7 @@ static int vt8500_add_chips(struct platform_device *pdev, void __iomem *base,

gpiochip_add(chip);
}
+
return 0;
}

@@ -273,36 +276,64 @@ static struct of_device_id vt8500_gpio_dt_ids[] = {

static int vt8500_gpio_probe(struct platform_device *pdev)
{
+ int ret;
void __iomem *gpio_base;
- struct device_node *np;
+ struct device_node *np = pdev->dev.of_node;
const struct of_device_id *of_id =
of_match_device(vt8500_gpio_dt_ids, &pdev->dev);

- if (!of_id) {
- dev_err(&pdev->dev, "Failed to find gpio controller\n");
+ if (!np) {
+ dev_err(&pdev->dev, "GPIO node missing in devicetree\n");
return -ENODEV;
}

- np = pdev->dev.of_node;
- if (!np) {
- dev_err(&pdev->dev, "Missing GPIO description in devicetree\n");
- return -EFAULT;
+ if (!of_id) {
+ dev_err(&pdev->dev, "No matching driver data\n");
+ return -ENODEV;
}

gpio_base = of_iomap(np, 0);
if (!gpio_base) {
dev_err(&pdev->dev, "Unable to map GPIO registers\n");
- of_node_put(np);
return -ENOMEM;
}

- vt8500_add_chips(pdev, gpio_base, of_id->data);
+ ret = vt8500_add_chips(pdev, gpio_base, of_id->data);
+ if (ret) {
+ iounmap(gpio_base);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int vt8500_gpio_remove(struct platform_device *pdev)
+{
+ int i;
+ int ret;
+ const struct vt8500_gpio_data *data;
+ struct vt8500_gpio_chip *vtchip = platform_get_drvdata(pdev);
+ void __iomem *gpio_base = vtchip[0].base;
+ const struct of_device_id *of_id =
+ of_match_device(vt8500_gpio_dt_ids, &pdev->dev);
+
+ data = of_id->data;
+
+ for (i = 0; i < data->num_banks; i++) {
+ ret = gpiochip_remove(&vtchip[i].chip);
+ if (ret)
+ dev_warn(&pdev->dev, "gpiochip_remove returned %d\n",
+ ret);
+ }
+
+ iounmap(gpio_base);

return 0;
}

static struct platform_driver vt8500_gpio_driver = {
.probe = vt8500_gpio_probe,
+ .remove = vt8500_gpio_remove,
.driver = {
.name = "vt8500-gpio",
.owner = THIS_MODULE,
--
1.7.9.5


\
 
 \ /
  Last update: 2013-01-10 21:01    [W:0.060 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site