lkml.org 
[lkml]   [2013]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv3 1/8] serial: 8250: Allow drivers to deliver capabilities
Date
Modern UARTs are able to provide information about their
capabilities such as FIFO size. This allows the drivers to
deliver this information to 8250.c when they are registering
ports.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Alan Cox <alan@linux.intel.com>
---
drivers/tty/serial/8250/8250.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index d085e3a..da3f828 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -1980,9 +1980,12 @@ static int serial8250_startup(struct uart_port *port)
if (port->type == PORT_8250_CIR)
return -ENODEV;

- port->fifosize = uart_config[up->port.type].fifo_size;
- up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
- up->capabilities = uart_config[up->port.type].flags;
+ if (!port->fifosize)
+ port->fifosize = uart_config[port->type].fifo_size;
+ if (!up->tx_loadsz)
+ up->tx_loadsz = uart_config[port->type].tx_loadsz;
+ if (!up->capabilities)
+ up->capabilities = uart_config[port->type].flags;
up->mcr = 0;

if (port->iotype != up->cur_iotype)
@@ -2815,9 +2818,12 @@ static void
serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type)
{
up->port.type = type;
- up->port.fifosize = uart_config[type].fifo_size;
- up->capabilities = uart_config[type].flags;
- up->tx_loadsz = uart_config[type].tx_loadsz;
+ if (!up->port.fifosize)
+ up->port.fifosize = uart_config[type].fifo_size;
+ if (!up->tx_loadsz)
+ up->tx_loadsz = uart_config[type].tx_loadsz;
+ if (!up->capabilities)
+ up->capabilities = uart_config[type].flags;
}

static void __init
@@ -3251,6 +3257,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->bugs = up->bugs;
uart->port.mapbase = up->port.mapbase;
uart->port.private_data = up->port.private_data;
+ uart->port.fifosize = up->port.fifosize;
+ uart->tx_loadsz = up->tx_loadsz;
+ uart->capabilities = up->capabilities;
+
if (up->port.dev)
uart->port.dev = up->port.dev;

--
1.7.10.4


\
 
 \ /
  Last update: 2013-01-10 11:43    [W:0.078 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site