lkml.org 
[lkml]   [2012]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC PATCH] [media] rc: filter out not allowed protocols when decoding
From
Sean , many thanks for your help. I know much more about IR framwork
now. I'll try to
work out a patch to remove "allowed_protocols".

Thanks again!
[Du, Changbin]

2012/9/4 Sean Young <sean@mess.org>:
> On Tue, Sep 04, 2012 at 11:06:07AM +0800, Changbin Du wrote:
>> > > mutex_lock(&ir_raw_handler_lock);
>> > > - list_for_each_entry(handler, &ir_raw_handler_list, list)
>> > > - handler->decode(raw->dev, ev);
>> > > + list_for_each_entry(handler, &ir_raw_handler_list, list) {
>> > > + /* use all protocol by default */
>> > > + if (raw->dev->allowed_protos == RC_TYPE_UNKNOWN ||
>> > > + raw->dev->allowed_protos & handler->protocols)
>> > > + handler->decode(raw->dev, ev);
>> > > + }
>> >
>> > Each IR protocol decoder already checks whether it is enabled or not;
>> > should it not be so that only allowed protocols can be enabled rather
>> > than checking both enabled_protocols and allowed_protocols?
>> >
>> > Just from reading store_protocols it looks like decoders which aren't
>> > in allowed_protocols can be enabled, which makes no sense. Also
>> > ir_raw_event_register all protocols are enabled rather than the
>> > allowed ones.
>> >
>> >
>> > Lastely I don't know why raw ir drivers should dictate which protocols
>> > can be enabled. Would it not be better to remove it entirely?
>>
>>
>> I agree with you. I just thought that the only thing a decoder should care
>> is its decoding logic, but not including decoder management. My idaea is:
>> 1) use enabled_protocols to select decoders in ir_raw.c, but not
>> placed in decoders to do the judgement.
>> 2) remove allowed_protocols or just use it to set the default
>> decoder (also should rename allowed_protocols to default_protocol).
>
> The default decoder should be the one set by the rc keymap.
>
>> I also have a question:
>> Is there a requirement that one more decoders are enabled for a
>> IR device at the same time?
>
> Yes, you want to be able to multiple remotes on the IR device (which
> you can do as long as the scancodes don't overlap, I think), and the
> lirc device is implemented as a decoder, so you might want to see the
> raw IR as well as have it decoded.
>
>> And if that will lead to a issue that each decoder may decode a
>> same pulse sequence to different evnets since their protocol is
>> different?
>
> At the moment, no. David Hardeman has sent a patch for this:
>
> http://patchwork.linuxtv.org/patch/11388/
>
>
> Sean


\
 
 \ /
  Last update: 2012-09-06 12:23    [W:0.083 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site