lkml.org 
[lkml]   [2012]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 20/31] arm64: User access library function
On Wed, Sep 05, 2012 at 10:05:34PM +0100, Russell King - ARM Linux wrote:
> On Wed, Sep 05, 2012 at 10:01:37PM +0100, Catalin Marinas wrote:
> > There are indeed a few KB gain in code size but that's probably coming
> > from the exception table since otherwise you just replace a bl with
> > ldrt. It depends on what the compiler does as well, the arm code has
> > some carefully chosen registers when calling the __get_user_x function.
>
> It's more than that - it's not just the ldr but also a zeroing of a
> temporary register to hold the error code should the instruction fault.
> So it's not only the exception tables but also an increase in the
> main path - and that's where you benefit from having it out of line and
> thereby a hotter i-cache.

On 32-bit we have __get_user() inline and get_user() out of line. What
was the history behind this?

> > If you do the access_ok inline and the __get_user_x separately, the size
> > increase is even greater (at least in the arm64 case it can get to over
> > 20KB). I think x86 does the access_ok check out of line.
>
> Please talk to Will about get_user() and put_user(). Afterwards you
> will definitely want to keep them out of line on 64-bit ARM.

As I said, I already made the change to always inline get_user/put_user
with some penalty in the Image size but it makes the code cleaner. I'm
not entirely convinced of the performance gain/loss especially on ARMv8
cores with physically tagged caches. There is room for optimisation when
I get real silicon.

--
Catalin


\
 
 \ /
  Last update: 2012-09-06 11:21    [W:0.189 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site