lkml.org 
[lkml]   [2012]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 1/2] virtio_console: Add support for DMA memory allocation
On Wed, Sep 05, 2012 at 03:00:20PM +0200, Sjur Brændeland wrote:
> > The driver certainly shouldn't offer VIRTIO_CONSOLE_F_DMA_MEM if you
> > don't have DMA!
>
> OK, so the feature table could be done like this:
>
> static unsigned int features[] = {
> VIRTIO_CONSOLE_F_SIZE,
> VIRTIO_CONSOLE_F_MULTIPORT,
> #if VIRTIO_CONSOLE_HAS_DMA
> VIRTIO_CONSOLE_F_DMA_MEM,
> #endif
> }
>
> If the device then asks for VIRTIO_CONSOLE_F_DMA_MEM
> when DMA is not supported, virtio will do BUG_ON() from
> virtio_check_driver_offered_feature().
>
> Is this acceptable or should we add a check in virtcons_probe()
> and let the probing fail instead?
>
> E.g:
> /* Refuse to bind if F_DMA_MEM request cannot be met */
> if (!VIRTIO_CONSOLE_HAS_DMA &&
> (vdev->config->get_features(vdev) & (1 << VIRTIO_CONSOLE_F_DMA_MEM))){
> dev_err(&vdev->dev,
> "DMA_MEM requested, but arch does not support DMA\n");
> err = -EINVAL;
> goto fail;
> }
>
> Regards,
> Sjur

Failing probe would be cleaner. But there is still a problem:
old driver will happily bind to that device and then
fail to work, right?

virtio pci has revision id for this, but remoteproc doesn't
seem to have anything similar. Or did I miss it? If not -
we probably need to use a different
device id, and not a feature bit.

--
MST
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-09-05 17:23    [W:0.074 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site