lkml.org 
[lkml]   [2012]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: RCU warning during UBI file system mount
On Tue, Sep 04, 2012 at 08:43:12AM -0700, Subodh Nijsure wrote:
> MX28 is ARM device. I removed following from my config and these
> warnings went away.
>
> CONFIG_CPU_IDLE=y
> CONFIG_CPU_IDLE_GOV_LADDER=y
> CONFIG_CPU_IDLE_GOV_MENU=y
>
There is no cpuidle implemented on imx28. I do not understand how
these options influence the result here.

> I have attached the kernel configuration file I used.
>
> It doesn't affect specific hw I am working with as device is not
> required to enter idle mode.
> I am Cc-ing linux-arm folks, in case someone on arm platform
> requires CPU idele &, RCU to work.
>
I just ran a case with CONFIG_CPU_IDLE and RCU support and failed
to reproduce the warning. Is this something specific to gpmi-nand
or we can see it with any other imx28 drivers/cases? Sorry, I do
not have NAND flash set up on my imx28 board.

--
Regards,
Shawn


\
 
 \ /
  Last update: 2012-09-05 06:23    [W:0.044 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site