lkml.org 
[lkml]   [2012]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: radeon: Regression between v3.6-rc4 and v3.6-rc6: unable to allocate a PPLL
Date
> -----Original Message-----
> From: Andres Freund [mailto:andres@anarazel.de]
> Sent: Wednesday, September 26, 2012 9:41 AM
> To: Dan Carpenter
> Cc: Deucher, Alexander; LKML; David Airlie; dri-devel@lists.freedesktop.org
> Subject: Re: radeon: Regression between v3.6-rc4 and v3.6-rc6: unable to
> allocate a PPLL
>
> On Wednesday, September 26, 2012 03:00:09 PM Dan Carpenter wrote:
> > This is fixed now?
> Its been reverted in 2f1f4d9b60396d2df4cff829bd5376ffc8ed9a2c which is in
> rc6.
>
> On Monday, September 17, 2012 09:30:12 PM Deucher, Alexander wrote:
> Sorry, I somehow accidentally marked your email as read and thus didn't
> notice it.
>
> > I think I see the problem. I think it's a limitation of the current current
> modesetting API. The current API sets up each display independently which
> doesn't work so well if there are resource restrictions. There shouldn't be
> any contention on your board since you are only using 2 non-DP displays. It
> looks like X is mapping different crtcs to displays than the kernel fb.
> Initially the kernel set up the follow:
> > > [ 2.134901] [drm] crtc 0 using pll 0x2
> > > [ 2.362257] [drm] crtc 1 using pll 0x1
> > > [ 2.386709] [drm] crtc 2 using pll 0x0
> >
> > Crtc 0 -> DCPLL -> DP
> > Crtc 1 -> PPLL2 -> DVI
> > Crtc 2 -> PPLL1 -> DVI
> >
> > When X loads, it tried to set a different crtc to display mapping:
> > > [ 60.679310] [drm] crtc 0 using pll 0xff
> > > [ 60.789183] [drm] crtc 1 using pll 0x2
> > > [ 60.819594] [drm] crtc 2 using pll 0x1
> >
> > Crtc 0 -> INVALID -> DVI 0
> > Crtc 1 -> DCPLL -> DP
> > Crtc 2 -> PPLL2 -> DVI 1
> >
> > Crtc 0 should have used PPLL1 or PPLL2, but they were already in use by
> > crtc 1 and crtc 2 from the previous modeset. Since the modeset API is
> > not atomic, it doesn't have the whole picture. I'm not sure of a good
> > solution right now prior to the new atomic modeset API that is under
> > discussion. I guess we can revert the patch for 3.6. For 3.7 I guess we
> > need to validate the actual connector to make sure we aren't trying to set
> > a different configuration relating to the same connector without first
> > tearing down the first one. In the interim, you should be able to work
> > around it by disabling the non-DP outputs and then bringing than back up.
> Thanks! That explanation makes sense. I can work around it just fine, starting
> X multiple times works which coincides nicely with your explanation.
>
> The code in the 3.7 branch doesn't do that extended validation yet, rigth? If
> you want/need you can CC for testing once thats ready.

It should handle it now. If you could test it that would be great.

Alex




\
 
 \ /
  Last update: 2012-09-26 16:01    [W:0.061 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site