lkml.org 
[lkml]   [2012]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3] media: davinci: vpif: display: separate out subdev from output
Date
On Tue 25 September 2012 13:11:49 Prabhakar wrote:
> From: Lad, Prabhakar <prabhakar.lad@ti.com>
>
> vpif_display relied on a 1-1 mapping of output and subdev. This is not
> necessarily the case. Separate the two. So there is a list of subdevs
> and a list of outputs. Each output refers to a subdev and has routing
> information. An output does not have to have a subdev.
>
> The initial output for each channel is set to the fist output.
>
> Currently missing is support for associating multiple subdevs with
> an output.
>

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>

Looks good!

Regards,

Hans

> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
> Cc: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: Sekhar Nori <nsekhar@ti.com>
> ---
> This patch is dependent on the patch series from Hans
> (http://www.mail-archive.com/linux-media@vger.kernel.org/msg52270.html)
>
> Changes for V3:
> 1: Filled capabilities, std for output as pointed by Hans.
> 2: Removed current_norm as this is being phased out.
>
> Changes for V2:
> 1: Changed v4l2_device_call_until_err() call to v4l2_subdev_call() for
> s_routing, since this call is for specific subdev, pointed out by Hans.
>
>
> arch/arm/mach-davinci/board-da850-evm.c | 33 +++++-
> arch/arm/mach-davinci/board-dm646x-evm.c | 44 +++++++-
> drivers/media/platform/davinci/vpif_display.c | 141 +++++++++++++++++++-----
> include/media/davinci/vpif_types.h | 19 +++-
> 4 files changed, 192 insertions(+), 45 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> index 3081ea4..3e07fca 100644
> --- a/arch/arm/mach-davinci/board-da850-evm.c
> +++ b/arch/arm/mach-davinci/board-da850-evm.c
> @@ -46,6 +46,7 @@
> #include <mach/spi.h>
>
> #include <media/tvp514x.h>
> +#include <media/adv7343.h>
>
> #define DA850_EVM_PHY_ID "davinci_mdio-0:00"
> #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
> @@ -1257,16 +1258,38 @@ static struct vpif_subdev_info da850_vpif_subdev[] = {
> },
> };
>
> -static const char const *vpif_output[] = {
> - "Composite",
> - "S-Video",
> +static const struct vpif_output da850_ch0_outputs[] = {
> + {
> + .output = {
> + .index = 0,
> + .name = "Composite",
> + .type = V4L2_OUTPUT_TYPE_ANALOG,
> + .capabilities = V4L2_OUT_CAP_STD,
> + .std = V4L2_STD_ALL,
> + },
> + .subdev_name = "adv7343",
> + .output_route = ADV7343_COMPOSITE_ID,
> + },
> + {
> + .output = {
> + .index = 1,
> + .name = "S-Video",
> + .type = V4L2_OUTPUT_TYPE_ANALOG,
> + .capabilities = V4L2_OUT_CAP_STD,
> + .std = V4L2_STD_ALL,
> + },
> + .subdev_name = "adv7343",
> + .output_route = ADV7343_SVIDEO_ID,
> + },
> };
>
> static struct vpif_display_config da850_vpif_display_config = {
> .subdevinfo = da850_vpif_subdev,
> .subdev_count = ARRAY_SIZE(da850_vpif_subdev),
> - .output = vpif_output,
> - .output_count = ARRAY_SIZE(vpif_output),
> + .chan_config[0] = {
> + .outputs = da850_ch0_outputs,
> + .output_count = ARRAY_SIZE(da850_ch0_outputs),
> + },
> .card_name = "DA850/OMAP-L138 Video Display",
> };
>
> diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
> index ad249c7..6d0ca82 100644
> --- a/arch/arm/mach-davinci/board-dm646x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm646x-evm.c
> @@ -26,6 +26,7 @@
> #include <linux/i2c/pcf857x.h>
>
> #include <media/tvp514x.h>
> +#include <media/adv7343.h>
>
> #include <linux/mtd/mtd.h>
> #include <linux/mtd/nand.h>
> @@ -496,18 +497,49 @@ static struct vpif_subdev_info dm646x_vpif_subdev[] = {
> },
> };
>
> -static const char *output[] = {
> - "Composite",
> - "Component",
> - "S-Video",
> +static const struct vpif_output dm6467_ch0_outputs[] = {
> + {
> + .output = {
> + .index = 0,
> + .name = "Composite",
> + .type = V4L2_OUTPUT_TYPE_ANALOG,
> + .capabilities = V4L2_OUT_CAP_STD,
> + .std = V4L2_STD_ALL,
> + },
> + .subdev_name = "adv7343",
> + .output_route = ADV7343_COMPOSITE_ID,
> + },
> + {
> + .output = {
> + .index = 1,
> + .name = "Component",
> + .type = V4L2_OUTPUT_TYPE_ANALOG,
> + .capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS,
> + },
> + .subdev_name = "adv7343",
> + .output_route = ADV7343_COMPONENT_ID,
> + },
> + {
> + .output = {
> + .index = 2,
> + .name = "S-Video",
> + .type = V4L2_OUTPUT_TYPE_ANALOG,
> + .capabilities = V4L2_OUT_CAP_STD,
> + .std = V4L2_STD_ALL,
> + },
> + .subdev_name = "adv7343",
> + .output_route = ADV7343_SVIDEO_ID,
> + },
> };
>
> static struct vpif_display_config dm646x_vpif_display_config = {
> .set_clock = set_vpif_clock,
> .subdevinfo = dm646x_vpif_subdev,
> .subdev_count = ARRAY_SIZE(dm646x_vpif_subdev),
> - .output = output,
> - .output_count = ARRAY_SIZE(output),
> + .chan_config[0] = {
> + .outputs = dm6467_ch0_outputs,
> + .output_count = ARRAY_SIZE(dm6467_ch0_outputs),
> + },
> .card_name = "DM646x EVM",
> };
>
> diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
> index 8d1ce09..d94b8a2 100644
> --- a/drivers/media/platform/davinci/vpif_display.c
> +++ b/drivers/media/platform/davinci/vpif_display.c
> @@ -308,7 +308,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
> channel2_intr_assert();
> channel2_intr_enable(1);
> enable_channel2(1);
> - if (vpif_config_data->ch2_clip_en)
> + if (vpif_config_data->chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
> channel2_clipping_enable(1);
> }
>
> @@ -317,7 +317,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
> channel3_intr_assert();
> channel3_intr_enable(1);
> enable_channel3(1);
> - if (vpif_config_data->ch3_clip_en)
> + if (vpif_config_data->chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
> channel3_clipping_enable(1);
> }
>
> @@ -1174,14 +1174,16 @@ static int vpif_streamoff(struct file *file, void *priv,
> if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
> /* disable channel */
> if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
> - if (vpif_config_data->ch2_clip_en)
> + if (vpif_config_data->
> + chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
> channel2_clipping_enable(0);
> enable_channel2(0);
> channel2_intr_enable(0);
> }
> if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) ||
> (2 == common->started)) {
> - if (vpif_config_data->ch3_clip_en)
> + if (vpif_config_data->
> + chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
> channel3_clipping_enable(0);
> enable_channel3(0);
> channel3_intr_enable(0);
> @@ -1214,41 +1216,118 @@ static int vpif_enum_output(struct file *file, void *fh,
> {
>
> struct vpif_display_config *config = vpif_dev->platform_data;
> + struct vpif_display_chan_config *chan_cfg;
> + struct vpif_fh *vpif_handler = fh;
> + struct channel_obj *ch = vpif_handler->channel;
>
> - if (output->index >= config->output_count) {
> + chan_cfg = &config->chan_config[ch->channel_id];
> + if (output->index >= chan_cfg->output_count) {
> vpif_dbg(1, debug, "Invalid output index\n");
> return -EINVAL;
> }
>
> - strcpy(output->name, config->output[output->index]);
> - output->type = V4L2_OUTPUT_TYPE_ANALOG;
> - output->std = VPIF_V4L2_STD;
> + *output = chan_cfg->outputs[output->index].output;
> + return 0;
> +}
> +
> +/**
> + * vpif_output_to_subdev() - Maps output to sub device
> + * @vpif_cfg - global config ptr
> + * @chan_cfg - channel config ptr
> + * @index - Given output index from application
> + *
> + * lookup the sub device information for a given output index.
> + * we report all the output to application. output table also
> + * has sub device name for the each output
> + */
> +static int
> +vpif_output_to_subdev(struct vpif_display_config *vpif_cfg,
> + struct vpif_display_chan_config *chan_cfg, int index)
> +{
> + struct vpif_subdev_info *subdev_info;
> + const char *subdev_name;
> + int i;
> +
> + vpif_dbg(2, debug, "vpif_output_to_subdev\n");
> +
> + if (chan_cfg->outputs == NULL)
> + return -1;
> +
> + subdev_name = chan_cfg->outputs[index].subdev_name;
> + if (subdev_name == NULL)
> + return -1;
> +
> + /* loop through the sub device list to get the sub device info */
> + for (i = 0; i < vpif_cfg->subdev_count; i++) {
> + subdev_info = &vpif_cfg->subdevinfo[i];
> + if (!strcmp(subdev_info->name, subdev_name))
> + return i;
> + }
> + return -1;
> +}
> +
> +/**
> + * vpif_set_output() - Select an output
> + * @vpif_cfg - global config ptr
> + * @ch - channel
> + * @index - Given output index from application
> + *
> + * Select the given output.
> + */
> +static int vpif_set_output(struct vpif_display_config *vpif_cfg,
> + struct channel_obj *ch, int index)
> +{
> + struct vpif_display_chan_config *chan_cfg =
> + &vpif_cfg->chan_config[ch->channel_id];
> + struct vpif_subdev_info *subdev_info = NULL;
> + struct v4l2_subdev *sd = NULL;
> + u32 input = 0, output = 0;
> + int sd_index;
> + int ret;
> +
> + sd_index = vpif_output_to_subdev(vpif_cfg, chan_cfg, index);
> + if (sd_index >= 0) {
> + sd = vpif_obj.sd[sd_index];
> + subdev_info = &vpif_cfg->subdevinfo[sd_index];
> + }
>
> + if (sd) {
> + input = chan_cfg->outputs[index].input_route;
> + output = chan_cfg->outputs[index].output_route;
> + ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0);
> + if (ret < 0 && ret != -ENOIOCTLCMD) {
> + vpif_err("Failed to set output\n");
> + return ret;
> + }
> +
> + }
> + ch->output_idx = index;
> + ch->sd = sd;
> + if (chan_cfg->outputs != NULL)
> + /* update tvnorms from the sub device output info */
> + ch->video_dev->tvnorms = chan_cfg->outputs[index].output.std;
> return 0;
> }
>
> static int vpif_s_output(struct file *file, void *priv, unsigned int i)
> {
> + struct vpif_display_config *config = vpif_dev->platform_data;
> + struct vpif_display_chan_config *chan_cfg;
> struct vpif_fh *fh = priv;
> struct channel_obj *ch = fh->channel;
> struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
> - int ret = 0;
> +
> + chan_cfg = &config->chan_config[ch->channel_id];
> +
> + if (i >= chan_cfg->output_count)
> + return -EINVAL;
>
> if (common->started) {
> vpif_err("Streaming in progress\n");
> return -EBUSY;
> }
>
> - ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
> - s_routing, 0, i, 0);
> -
> - if (ret < 0)
> - vpif_err("Failed to set output standard\n");
> -
> - ch->output_idx = i;
> - if (vpif_obj.sd[i])
> - ch->sd = vpif_obj.sd[i];
> - return ret;
> + return vpif_set_output(config, ch, i);
> }
>
> static int vpif_g_output(struct file *file, void *priv, unsigned int *i)
> @@ -1291,9 +1370,12 @@ vpif_enum_dv_timings(struct file *file, void *priv,
> {
> struct vpif_fh *fh = priv;
> struct channel_obj *ch = fh->channel;
> + int ret;
>
> - return v4l2_subdev_call(vpif_obj.sd[ch->output_idx],
> - video, enum_dv_timings, timings);
> + ret = v4l2_subdev_call(ch->sd, video, enum_dv_timings, timings);
> + if (ret == -ENOIOCTLCMD && ret == -ENODEV)
> + return -EINVAL;
> + return ret;
> }
>
> /**
> @@ -1320,12 +1402,9 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
>
> /* Configure subdevice timings, if any */
> ret = v4l2_subdev_call(ch->sd, video, s_dv_timings, timings);
> - if (ret == -ENOIOCTLCMD) {
> - vpif_dbg(2, debug, "Custom DV timings not supported by "
> - "subdevice\n");
> - return -ENODATA;
> - }
> - if (ret < 0 && ret != -ENODEV) {
> + if (ret == -ENOIOCTLCMD || ret == -ENODEV)
> + ret = 0;
> + if (ret < 0) {
> vpif_dbg(2, debug, "Error setting custom DV timings\n");
> return ret;
> }
> @@ -1531,9 +1610,6 @@ static struct video_device vpif_video_template = {
> .name = "vpif",
> .fops = &vpif_fops,
> .ioctl_ops = &vpif_ioctl_ops,
> - .tvnorms = VPIF_V4L2_STD,
> - .current_norm = V4L2_STD_625_50,
> -
> };
>
> /*Configure the channels, buffer sizei, request irq */
> @@ -1754,6 +1830,11 @@ static __init int vpif_probe(struct platform_device *pdev)
> ch->video_dev->lock = &common->lock;
> video_set_drvdata(ch->video_dev, ch);
>
> + /* select output 0 */
> + err = vpif_set_output(config, ch, 0);
> + if (err)
> + goto probe_out;
> +
> /* register video device */
> vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n",
> (int)ch, (int)&ch->video_dev);
> diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h
> index 65e8fe1..3882e06 100644
> --- a/include/media/davinci/vpif_types.h
> +++ b/include/media/davinci/vpif_types.h
> @@ -20,6 +20,7 @@
> #include <linux/i2c.h>
>
> #define VPIF_CAPTURE_MAX_CHANNELS 2
> +#define VPIF_DISPLAY_MAX_CHANNELS 2
>
> enum vpif_if_type {
> VPIF_IF_BT656,
> @@ -39,15 +40,25 @@ struct vpif_subdev_info {
> struct i2c_board_info board_info;
> };
>
> +struct vpif_output {
> + struct v4l2_output output;
> + const char *subdev_name;
> + u32 input_route;
> + u32 output_route;
> +};
> +
> +struct vpif_display_chan_config {
> + const struct vpif_output *outputs;
> + int output_count;
> + bool clip_en;
> +};
> +
> struct vpif_display_config {
> int (*set_clock)(int, int);
> struct vpif_subdev_info *subdevinfo;
> int subdev_count;
> - const char **output;
> - int output_count;
> + struct vpif_display_chan_config chan_config[VPIF_DISPLAY_MAX_CHANNELS];
> const char *card_name;
> - bool ch2_clip_en;
> - bool ch3_clip_en;
> };
>
> struct vpif_input {
>


\
 
 \ /
  Last update: 2012-09-25 14:21    [W:0.131 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site