lkml.org 
[lkml]   [2012]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/5] PCI/IOV: simplify code by hotplug safe pci_get_domain_bus_and_slot()
On Thu, Sep 20, 2012 at 2:38 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> On Tue, Aug 28, 2012 at 8:43 AM, Jiang Liu <liuj97@gmail.com> wrote:
>> Following code has a race window between pci_find_bus() and pci_get_slot()
>> if PCI hotplug operation happens between them which removes the pci_bus.
>> So use PCI hotplug safe interface pci_get_domain_bus_and_slot() instead,
>> which also reduces code complexity.
>>
>> struct pci_bus *pci_bus = pci_find_bus(domain, busno);
>> struct pci_dev *pci_dev = pci_get_slot(pci_bus, devfn);
>>
>> Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
>> ---
>> drivers/pci/iov.c | 8 ++------
>> 1 file changed, 2 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>> index aeccc91..b0fe771 100644
>> --- a/drivers/pci/iov.c
>> +++ b/drivers/pci/iov.c
>> @@ -152,15 +152,11 @@ failed1:
>> static void virtfn_remove(struct pci_dev *dev, int id, int reset)
>> {
>> char buf[VIRTFN_ID_LEN];
>> - struct pci_bus *bus;
>> struct pci_dev *virtfn;
>> struct pci_sriov *iov = dev->sriov;
>>
>> - bus = pci_find_bus(pci_domain_nr(dev->bus), virtfn_bus(dev, id));
>> - if (!bus)
>> - return;
>> -
>> - virtfn = pci_get_slot(bus, virtfn_devfn(dev, id));
>> + virtfn = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus),
>> + virtfn_bus(dev, id), virtfn_devfn(dev, id));
>> if (!virtfn)
>> return;
>>
>
> Hi,
>
> This one cause IOV regression, when remove bridge with pci devices under that.
>
> in that case, VFs are stopped before PF, so they are not in device
> tree anymore.
> so pci_get_domain_bus_and_slot will not find those VFs.
>
> So the reference to PF is not released. Also vit_bus may not be released too.
>
> So you have to rework
> pci_get_domain_bus_and_slot to make it work on pci devices get stopped only.
>
> or just drop this from the tree.

pci_find_bus() is a broken interface (because there's no reference
counting or safety with respect to hot-plug), and if the design
depends on it, that means the design is broken, too. I don't think
reworking pci_get_domain_bus_and_slot() is the right answer.

It's not clear to me why we need the split between stopping and
removing devices. That split leads to these zombie devices that have
been stopped and are no longer findable by bus_find_device() (which is
used by pci_get_domain_bus_and_slot()), but still "exist" in some
fashion until they're removed. It's unreasonable for random PCI and
driver code to have to worry about that zombie state.

I'll revert this patch for now to fix the regression. Of course, that
means we will still have the old problem of using the unsafe
pci_find_bus().

> BTW, Bjorn,
> for the similar reason, you need to apply
> http://git.kernel.org/?p=linux/kernel/git/yinghai/linux-yinghai.git;a=commitdiff;h=e5a50aa3dfca1331c7c783412b1524bea06d2752
> ...
> the reason is:
>
> We stop all VFs at first , stop PF
> before we stop PF, we can not remove VFs,
>
> otherwise virtfn_remove does not work properly to remove reference and
> virtfn bus while can not find vf.

I'll apply this one, too, for now. I put them both on the
pci/yinghai-revert-pci_find_bus-and-remove-cleanup branch. Let me
know if that's not what you expected.

I'm not happy about either reverting Jiang's patch or splitting
stop/remove again. It complicates the design and the code. I'll
apply them because they're regressions, and we don't have time for
redesign before 3.7. But I encourage you to think about how to do
this more cleanly.

Bjorn


\
 
 \ /
  Last update: 2012-09-21 02:41    [W:0.639 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site