lkml.org 
[lkml]   [2012]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] efikamx: reintroduce Genesi Efika MX Smarttop via device tree
On Thu, Aug 09, 2012 at 09:29:39AM -0500, Matt Sealey wrote:
> The reason the new kernel depends on the new U-Boot is we're trying to
> do all pinmux configuration in U-Boot (and we do in-house, and it
> works). No pinctrl stuff in the kernel or device tree is required at
> this point. The Old Kernel will remux a few things redundantly or
> change drive strengths or whatever or add hysteresis to the UART port
> which is not board-burning but is not really necessary, but it will
> work. The new kernel will just be able to do what it does out of the
> box, which is how it should be (hence why I object to adding pinctrl
> setup...)
>
Then I will have to refuse to accept your patch, because I'm working on
a series to remove pinctrl_provide_dummies() from imx51_dt_init().

--
Regards,
Shawn



\
 
 \ /
  Last update: 2012-08-10 04:21    [W:1.112 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site