lkml.org 
[lkml]   [2012]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] gpio/omap: add *remove* callback in platform_driver
Date
"DebBarma, Tarun Kanti" <tarun.kanti@ti.com> writes:

> On Wed, Aug 8, 2012 at 10:40 PM, Kevin Hilman <khilman@ti.com> wrote:
>> Tarun Kanti DebBarma <tarun.kanti@ti.com> writes:
>>
>>> Add *remove* callback so that necessary cleanup operations are
>>> performed when device is unregistered. The device is deleted
>>> from the list and associated clock handle is released by
>>> calling clk_put() and irq descriptor is released using the
>>> irq_free_desc() api.
>>>
>>> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
>>> Reported-by: Paul Walmsley <paul@pwsan.com>
>>> Reviewed-by: Jon Hunter <jon-hunter@ti.com>
>>> Cc: Kevin Hilman <khilman@ti.com>
>>> Cc: Rajendra Nayak <rnayak@ti.com>
>>> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
>>> Cc: Cousson, Benoit <b-cousson@ti.com>
>>> Cc: Paul Walmsley <paul@pwsan.com>
>>> ---
>>> v2:
>>> Baseline: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
>>> Commit: 0d7614f09c1ebdbaa1599a5aba7593f147bf96ee (Linux 3.6-rc1)
>>>
>>> (1) Use irq_free_descs() instead of irq_free_desc().
>>> Besides, irq_free_desc() was using wrong parameter,
>>> irq_base, instead of bank->irq.
>>> (2) irq_free_descs() moved outside spin_lock/unlock_*()
>>> in order to avoid exception warnings.
>>>
>>> (3) pm_runtime_disable() added so that bind can happen successfully
>>>
>>> Test Detail:
>>> Step 1: Unbind gpio.5 device in order to invoke the *remove* callback.
>>> #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/unbind
>>>
>>> Step 2: Bind gpio.5 device and confirm probe() for the device succeeds.
>>> #echo "omap_gpio.5" > sys/bus/platform/drivers/omap_gpio/bind
>>>
>>> Step 3: Execute read/write GPIO test case.
>>
>> What happens when GPIOs are in use (requested)?
> If I try to unbind a currently active GPIO bank then I see an exception
> after the irq descriptor is freed by the remove. I believe this is expected
> because interrupt raised by the system would not be handled.

... and the GPIO is still configured to trigger interrupts.

The point is that there is lots to cleanup/unconfigure properly for this
to work properly.

Kevin

> [ 18.859405] irq_free_descs: calling free_desc(192)...
> [ 18.866180] irq_free_descs: calling free_desc(192)...
> [ 18.872680] irq_free_descs: calling free_desc(192)...
> [ 18.877990] irq_free_descs: calling free_desc(192)...
> [ 18.883270] irq_free_descs: calling free_desc(192)...
> [ 18.888549] irq_free_descs: calling free_desc(192)...
> [ 18.893859] irq_free_descs: calling free_desc(192)...
> [ 18.899139] irq_free_descs: calling free_desc(192)...
> [ 18.904418] irq_free_descs: calling free_desc(192)...
> [ 18.909729] irq_free_descs: calling free_desc(192)...
> [ 18.915008] irq_free_descs: calling free_desc(192)...
> [ 18.920288] irq_free_descs: calling free_desc(192)...
> [ 18.925598] irq_free_descs: calling free_desc(192)...
> [ 18.930877] irq_free_descs: calling free_desc(192)...
> [ 18.936157] irq_free_descs: calling free_desc(192)...
> [ 18.941467] irq_free_descs: calling free_desc(192)...
> [ 18.946746] irq_free_descs: calling free_desc(192)...
> [ 18.952026] irq_free_descs: calling free_desc(192)...
> [ 18.957336] irq_free_descs: calling free_desc(192)...
> [ 18.962615] irq_free_descs: calling free_desc(192)...
> [ 18.967895] irq_free_descs: calling free_desc(192)...
> [ 18.973205] irq_free_descs: calling free_desc(192)...
> [ 18.978485] irq_free_descs: calling free_desc(192)...
> [ 18.983764] irq_free_descs: calling free_desc(192)...
> [ 18.989074] irq_free_descs: calling free_desc(192)...
> [ 18.994354] irq_free_descs: calling free_desc(192)...
> [ 18.999633] irq_free_descs: calling free_desc(192)...
> [ 19.004913] irq_free_descs: calling free_desc(192)...
> [ 19.010223] irq_free_descs: calling free_desc(192)...
> [ 19.015502] irq_free_descs: calling free_desc(192)...
> [ 19.020782] irq_free_descs: calling free_desc(192)...
> [ 19.026092] irq_free_descs: calling free_desc(192)...
> [ 19.032440] irq 194, desc: c072f340, depth: 1, count: 0, unhandled: 0
> [ 19.039154] ->handle_irq(): c00a3e08, handle_bad_irq+0x0/0x260
> [ 19.045379] ->irq_data.chip(): c078ff7c, no_irq_chip+0x0/0x5c
> [ 19.051391] ->action(): ef0d42c0
> [ 19.054748] ->action->handler(): c0399ee0, ks8851_irq+0x0/0x1c
> [ 19.060852] IRQ_NOPROBE set
> [ 19.064056] IRQ_NOREQUEST set
> [ 19.067230] Unable to handle kernel paging request at virtual address 203a6c9
> [ 19.074768] pgd = c0004000
> [ 19.077606] [203a6c99] *pgd=00000000
> [ 19.081329] Internal error: Oops: 5 [#1] SMP ARM
> [ 19.086151] Modules linked in:
> [ 19.089355] CPU: 0 Not tainted (3.6.0-rc1-00003-g43a916d-dirty #885)
> [ 19.096374] PC is at gpio_irq_handler+0x7c/0x26c
> [ 19.101165] LR is at handle_bad_irq+0x1cc/0x260
> [ 19.105895] pc : [<c02e13b0>] lr : [<c00a3fd4>] psr: 60000093
> [ 19.105895] sp : c0725df8 ip : 00006fc6 fp : 00000001
> [ 19.117889] r10: 00000000 r9 : fa05502c r8 : 00000020
> [ 19.123352] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : ef0bbe10
> [ 19.130157] r3 : ef0c1980 r2 : 203a6c65 r1 : 00000034 r0 : 00000000
> [ 19.136993] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kel
> [ 19.144714] Control: 10c53c7d Table: ae89804a DAC: 00000017
> [ 19.150695] Process swapper/0 (pid: 0, stack limit = 0xc07242f8)
> [ 19.156982] Stack: (0xc0725df8 to 0xc0726000)
> [ 19.161529] 5de0: c0740
> [ 19.170074] 5e00: c0724000 c0724000 c07440d8 c07224a4 0000003e 00000000 c0740
> [ 19.178619] 5e20: c0725edc c00a3670 000001da c0015380 fa24010c c0742d30 c0720
> [ 19.187164] 5e40: 00000001 c000846c c0746980 c04f8c74 20000013 ffffffff c0724
> [ 19.195709] 5e60: 0005ebb2 00000001 00000000 c0746980 c1530ac0 ee8cfe00 c1530
> [ 19.204223] 5e80: 00000001 c07440d8 ee8cfe00 c0725edc 00000001 c0725ea8 00054
> [ 19.212768] 5ea0: 20000013 ffffffff c0724000 c007425c 00000002 00000000 c0077
> [ 19.221313] 5ec0: ef320b00 c0746980 00000000 c1530ac0 ef320b00 c0722ac0 c0720
> [ 19.229858] 5ee0: c152ec20 c00696cc 00000000 00000000 c0724000 c0724000 c1524
> [ 19.238403] 5f00: c152ec20 c0015e14 c0722ac0 c0722ac0 c0722ac0 c0722ac0 c0720
> [ 19.246948] 5f20: c0722ac0 c0722ac0 6e6b0f0d 00000004 00000000 00000000 c0080
> [ 19.255493] 5f40: 00000001 00000000 00000000 501539bc 00000004 c0091654 c1528
> [ 19.264038] 5f60: c07d55b8 5006c071 00000000 c008cab8 00000000 00000002 50064
> [ 19.272552] 5f80: c0748078 c0724000 c07c0548 c0504510 c0747e60 00000000 411f8
> [ 19.281097] 5fa0: 00000000 c0015e14 00000000 c0743e1c c07c0480 c07057dc bfffa
> [ 19.289642] 5fc0: 00000000 c06d48d8 ffffffff ffffffff c06d4450 00000000 0000c
> [ 19.298187] 5fe0: 00000000 10c53c7d c0742d08 c07057ac c0747e54 80008044 00000
> [ 19.306732] [<c02e13b0>] (gpio_irq_handler+0x7c/0x26c) from [<c00a3670>] (ge)
> [ 19.316558] [<c00a3670>] (generic_handle_irq+0x34/0x44) from [<c0015380>] (h)
> [ 19.325744] [<c0015380>] (handle_IRQ+0x4c/0xac) from [<c000846c>] (gic_handl)
> [ 19.334564] [<c000846c>] (gic_handle_irq+0x2c/0x60) from [<c04f8ee4>] (__irq)
> [ 19.343292] Exception stack(0xc0725e60 to 0xc0725ea8)
> [ 19.348571] 5e60: 0005ebb2 00000001 00000000 c0746980 c1530ac0 ee8cfe00 c1530
> [ 19.357116] 5e80: 00000001 c07440d8 ee8cfe00 c0725edc 00000001 c0725ea8 00054
> [ 19.365631] 5ea0: 20000013 ffffffff
> [ 19.369293] [<c04f8ee4>] (__irq_svc+0x44/0x5c) from [<c04f8c74>] (_raw_spin_)
> [ 19.378570] [<c04f8c74>] (_raw_spin_unlock_irq+0x28/0x2c) from [<c007425c>] )
> [ 19.388732] [<c007425c>] (finish_task_switch+0x84/0x198) from [<c04f7760>] ()
> [ 19.398193] [<c04f7760>] (__schedule+0x404/0x870) from [<c0015e14>] (cpu_idl)
> [ 19.406768] [<c0015e14>] (cpu_idle+0xe8/0x114) from [<c06d48d8>] (start_kern)
> [ 19.415466] Code: e59480e4 e1d311b4 e5d36034 e1a0a81b (e7920001)
> [ 19.421844] ---[ end trace 3eb9bf4b81babe15 ]---
> [ 19.426666] Kernel panic - not syncing: Fatal exception in interrupt
> [ 19.433288] CPU1: stopping
> [ 19.436157] [<c001beac>] (unwind_backtrace+0x0/0xf4) from [<c0019db4>] (hand)
> [ 19.445220] [<c0019db4>] (handle_IPI+0x130/0x15c) from [<c0008498>] (gic_han)
> [ 19.454223] [<c0008498>] (gic_handle_irq+0x58/0x60) from [<c04f8ee4>] (__irq)
> [ 19.462951] Exception stack(0xef06ff88 to 0xef06ffd0)
> [ 19.468231] ff80: c079f960 c079f960 00000000 00000000 ef068
> [ 19.476745] ffa0: c0504510 c0747e60 00000000 411fc092 c0748078 00000000 00000
> [ 19.485290] ffc0: c0015570 c0015574 60000113 ffffffff
> [ 19.490570] [<c04f8ee4>] (__irq_svc+0x44/0x5c) from [<c0015574>] (default_id)
> [ 19.499114] [<c0015574>] (default_idle+0x20/0x44) from [<c0015dc8>] (cpu_idl)
> [ 19.507659] [<c0015dc8>] (cpu_idle+0x9c/0x114) from [<804f1d94>] (0x804f1d94)
> ---
> Tarun
>>
>> Kevin
>>
>>> drivers/gpio/gpio-omap.c | 35 +++++++++++++++++++++++++++++++++++
>>> 1 files changed, 35 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
>>> index e6efd77..50de875 100644
>>> --- a/drivers/gpio/gpio-omap.c
>>> +++ b/drivers/gpio/gpio-omap.c
>>> @@ -1152,6 +1152,40 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
>>> return ret;
>>> }
>>>
>>> +/**
>>> + * omap_gpio_remove - cleanup a registered gpio device
>>> + * @pdev: pointer to current gpio platform device
>>> + *
>>> + * Called by driver framework whenever a gpio device is unregistered.
>>> + * GPIO is deleted from the list and associated clock handle freed.
>>> + */
>>> +static int __devexit omap_gpio_remove(struct platform_device *pdev)
>>> +{
>>> + struct device *dev = &pdev->dev;
>>> + struct gpio_bank *bank;
>>> + unsigned long flags;
>>> + int ret = -EINVAL;
>>> +
>>> + list_for_each_entry(bank, &omap_gpio_list, node) {
>>> + spin_lock_irqsave(&bank->lock, flags);
>>> + if (bank->dev == dev) {
>>> + clk_put(bank->dbck);
>>> + list_del(&bank->node);
>>> + ret = 0;
>>> + spin_unlock_irqrestore(&bank->lock, flags);
>>> + break;
>>> + }
>>> + spin_unlock_irqrestore(&bank->lock, flags);
>>> + }
>>> +
>>> + if (!ret) {
>>> + pm_runtime_disable(bank->dev);
>>> + irq_free_descs(bank->irq_base, bank->width);
>>> + }
>>> +
>>> + return ret;
>>> +}
>>> +
>>> #ifdef CONFIG_ARCH_OMAP2PLUS
>>>
>>> #if defined(CONFIG_PM_RUNTIME)
>>> @@ -1478,6 +1512,7 @@ MODULE_DEVICE_TABLE(of, omap_gpio_match);
>>>
>>> static struct platform_driver omap_gpio_driver = {
>>> .probe = omap_gpio_probe,
>>> + .remove = __devexit_p(omap_gpio_remove),
>>> .driver = {
>>> .name = "omap_gpio",
>>> .pm = &gpio_pm_ops,
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2012-08-09 17:42    [W:0.108 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site