lkml.org 
[lkml]   [2012]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] ARM: dt: tegra: cardhu: add entry for regulators
Date
This patch series add the PMIC and fixed regulators for 
cardhu board. There is multiple versions of cardhu baord named
as A01, A02, A03..and so on. Cardhu A01 and A03 are not supported.
Cardhu A02 and A04 have different sets of GPIO for regualtors.
The cardhu A04 is compatible for A05, A06 and A07 in GPIOs.
This patch series split the cardhu dts file to cardhu-a02 and
carchu-a04 and then add entry for different fixed regualtors.

In patch 1, it enabled the PMIC tps65910 which is main pmu for
the cardhu.
In Patch 2, split the cardhu support for cardhu-a02 and cardhu-a04.
In Patch 3, add different regulators.

Changes from V1-->V2:
- Remove the vdd_sdmmc1 regulator registration.
- Fix the pex_hvdd_3v3 regulator registration.
- Set panel regulator to be always on.
- Add i2c eeprom address in board-identification paragraph.


Laxman Dewangan (3):
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911.
ARM: dt: tegra: cardhu: split dts file for support multiple board
versions
ARM: tegra: cardhu: add dt entry for fixed regulators

arch/arm/boot/dts/tegra30-cardhu-a02.dts | 87 ++++++
arch/arm/boot/dts/tegra30-cardhu-a04.dts | 98 ++++++
arch/arm/boot/dts/tegra30-cardhu.dts | 171 -----------
arch/arm/boot/dts/tegra30-cardhu.dtsi | 473 ++++++++++++++++++++++++++++++
arch/arm/mach-tegra/Makefile.boot | 3 +-
5 files changed, 660 insertions(+), 172 deletions(-)
create mode 100644 arch/arm/boot/dts/tegra30-cardhu-a02.dts
create mode 100644 arch/arm/boot/dts/tegra30-cardhu-a04.dts
delete mode 100644 arch/arm/boot/dts/tegra30-cardhu.dts
create mode 100644 arch/arm/boot/dts/tegra30-cardhu.dtsi



\
 
 \ /
  Last update: 2012-08-09 14:02    [W:0.101 / U:1.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site