lkml.org 
[lkml]   [2012]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Intel xhci: Only switch the switchable ports
Date
With a previous patch to enable the EHCI/XHCI port switching, it switches
all the available ports.

The assumption is not correct because the BIOS may expect some ports
not switchable by the OS.

There are two more registers that contains the information of the switchable
and non-switchable ports.

This patch adds the checking code for the two register so that only the
switchable ports are altered.

Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
---
drivers/usb/host/pci-quirks.c | 27 +++++++++++++++++++++++----
1 file changed, 23 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 833b3c6..89f62f2 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -75,7 +75,9 @@
#define NB_PIF0_PWRDOWN_1 0x01100013

#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC

static struct amd_chipset_info {
struct pci_dev *nb_dev;
@@ -772,10 +774,18 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
return;
}

- ports_available = 0xffffffff;
+ /* Read USB3PRM, the USB 3.0 Port Routing Mask Register
+ * Indicate the ports that can be changed from OS.
+ */
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
+ ports_available);
+
/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
- * Register, to turn on SuperSpeed terminations for all
- * available ports.
+ * Register, to turn on SuperSpeed terminations for the
+ * switchable ports.
*/
pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
cpu_to_le32(ports_available));
@@ -785,7 +795,16 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
"under xHCI: 0x%x\n", ports_available);

- ports_available = 0xffffffff;
+ /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
+ * Indicate the port to be controlled by the EHCI host.
+ */
+
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
+ &ports_available);
+
+ dev_dbg(&xhci_pdev->dev, "Configurable ports to hand over the ECHI host:
+ 0x%x\n", ports_available);
+
/* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
* switch the USB 2.0 power and data lines over to the xHCI
* host.
--
1.7.9.5


\
 
 \ /
  Last update: 2012-08-09 12:21    [W:0.088 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site