Messages in this thread Patch in this message | | | From | Matt Sealey <> | Subject | [PATCH 2/2] ARM: only build ssi-fiq.S et al if CONFIG_SND_IMX_SOC_PCM_FIQ is selected | Date | Tue, 7 Aug 2012 17:45:14 -0500 |
| |
Further to the previous patch, a custom configuration may be used based on the imx_v6_v7_defconfig which removes the board depending on the audio driver pulling this support code. However, since it is built dependent on CONFIG_SND_IMX_SOC it is enabled in the build for all i.MX processors which enable any audio drivers.
Correct this by only building the SSI FIQ support code when the more specific CONFIG_SND_IMX_SOC_PCM_FIQ is enabled. Since it's enabled in the imx_v6_v7_defconfig anyway by the Eukrea board, nothing changes using the defconfig, so this is just a convenience for people reconfiguring their kernels more sparsely than the default.
Signed-off-by: Matt Sealey <matt@genesi-usa.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> --- arch/arm/plat-mxc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 6ac7200..89927f5 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o -ifdef CONFIG_SND_IMX_SOC +ifdef CONFIG_SND_IMX_SOC_PCM_FIQ obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o endif -- 1.7.9.5
| |