lkml.org 
[lkml]   [2012]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] regulator: add MAX8907 driver
On Mon, Aug 06, 2012 at 03:22:17PM -0600, Stephen Warren wrote:
> On 08/04/2012 04:19 AM, Mark Brown wrote:

> > I'm really not convinced it makes much sense to represent the backlight
> > driver current regulators as regulators, they only get used as part of
> > the backlight and are usually tightly coupled to their boosts.

> So you mean just completely remove any reference to WLED from the
> driver? There is a register to configure the current limit - do you not
> expect anything to ever need to set that in the kernel; do you expect
> the HW default to be correct, or the bootloader to set the desired value?

I'd expect it to be configured as part of configuring the overall
backlight, for an actual current regulator you're not setting a current
limit but rather a current which usually translates directly into a
brightness. As I say this will usually be done in conjunction with a
boost regulator.


\
 
 \ /
  Last update: 2012-08-07 00:41    [W:0.060 / U:0.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site