lkml.org 
[lkml]   [2012]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 3/5] drm/i915: register LVDS connector even if we can't get a panel mode
On Sat, Aug 04, 2012 at 11:57:27AM -0500, Seth Forshee wrote:
> On Fri, Aug 03, 2012 at 05:27:02PM +0100, Matthew Garrett wrote:
> > On Fri, Aug 03, 2012 at 11:24:51AM -0500, Seth Forshee wrote:
> >
> > > This is one of the things I wasn't so sure about. There are various
> > > checks in intel_lvds_init() that can cause it to bail out before we try
> > > to get the EDID, and I don't fully understand all of them. If non-laptop
> > > machines are expected to bail out before the EDID check then the
> > > approach I've taken seems reasonable. Otherwise adding a quirk probably
> > > is a good idea.
> >
> > I know we've previously had problems with machines with phantom LVDS
> > hardware, but I'm not sure what the current state of affairs is.
>
> It turns out that the framebuffer console issue is due to not having a
> mode when initializing LVDS. As a result 1024x768 is getting used for
> the framebuffer.
>
> So quirking is going to fix this situation. In fact, with the changes
> below switcheroo seems to work perfectly, without any of these patches
> at all.

I like this approach more - the only other solution I see is to ask the
currently active driver (i.e. radeon) at bootime for the right mode. Which
sounds much more hellish and fragile ...
-Daniel
--
Daniel Vetter
Mail: daniel@ffwll.ch
Mobile: +41 (0)79 365 57 48


\
 
 \ /
  Last update: 2012-08-05 23:21    [W:0.195 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site