lkml.org 
[lkml]   [2012]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/4] Runtime Interpreted Power Sequences
Date
Some device drivers (panel backlights especially) need to follow precise
sequences for powering on and off, involving gpios, regulators, PWMs
with a precise powering order and delays to respect between each steps.
These sequences are board-specific, and do not belong to a particular
driver - therefore they have been performed by board-specific hook
functions to far.

With the advent of the device tree and of ARM kernels that are not
board-tied, we cannot rely on these board-specific hooks anymore but
need a way to implement these sequences in a portable manner. This patch
introduces a simple interpreter that can execute such power sequences
encoded either as platform data or within the device tree.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
.../devicetree/bindings/power_seq/power_seq.txt | 117 ++++++
Documentation/power/power_seq.txt | 225 +++++++++++
drivers/power/Kconfig | 1 +
drivers/power/Makefile | 1 +
drivers/power/power_seq/Kconfig | 2 +
drivers/power/power_seq/Makefile | 1 +
drivers/power/power_seq/power_seq.c | 446 +++++++++++++++++++++
drivers/power/power_seq/power_seq_delay.c | 51 +++
drivers/power/power_seq/power_seq_gpio.c | 81 ++++
drivers/power/power_seq/power_seq_pwm.c | 85 ++++
drivers/power/power_seq/power_seq_regulator.c | 86 ++++
include/linux/power_seq.h | 174 ++++++++
12 files changed, 1270 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power_seq/power_seq.txt
create mode 100644 Documentation/power/power_seq.txt
create mode 100644 drivers/power/power_seq/Kconfig
create mode 100644 drivers/power/power_seq/Makefile
create mode 100644 drivers/power/power_seq/power_seq.c
create mode 100644 drivers/power/power_seq/power_seq_delay.c
create mode 100644 drivers/power/power_seq/power_seq_gpio.c
create mode 100644 drivers/power/power_seq/power_seq_pwm.c
create mode 100644 drivers/power/power_seq/power_seq_regulator.c
create mode 100644 include/linux/power_seq.h

diff --git a/Documentation/devicetree/bindings/power_seq/power_seq.txt b/Documentation/devicetree/bindings/power_seq/power_seq.txt
new file mode 100644
index 0000000..d3e3f6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_seq/power_seq.txt
@@ -0,0 +1,117 @@
+Runtime Interpreted Power Sequences
+===================================
+
+Power sequences are sequential descriptions of actions to be performed on
+power-related resources. Having these descriptions in a precise data format
+allows us to take much of the board-specific power control code out of the
+kernel and place it into the device tree instead, making kernels less
+board-dependant.
+
+In the device tree, power sequences are grouped into a set. The set is always
+declared as the "power-sequences" sub-node of the device node. Power sequences
+may reference resources declared by that device.
+
+Power Sequences Structure
+-------------------------
+Every device that makes use of power sequences must have a "power-sequences"
+sub-node. Power sequences are sub-nodes of this set node, and their node name
+indicates the id of the sequence.
+
+Every power sequence in turn contains its steps as sub-nodes of itself. Step
+must be named sequentially, with the first step named step0, the second step1,
+etc. Failure to follow this rule will result in a parsing error.
+
+Power Sequences Steps
+---------------------
+Step of a sequence describes an action to be performed on a resource. They
+always include a "type" property which indicates what kind of resource this
+step works on. Depending on the resource type, additional properties are defined
+to control the action to be performed.
+
+"delay" type required properties:
+ - delay_us: delay to wait in microseconds
+
+"regulator" type required properties:
+ - id: name of the regulator to use. Regulator is obtained by
+ regulator_get(dev, id)
+ - enable / disable: one of these two empty properties must be present to
+ enable or disable the resource
+
+"pwm" type required properties:
+ - id: name of the PWM to use. PWM is obtained by pwm_get(dev, id)
+ - enable / disable: one of these two empty properties must be present to
+ enable or disable the resource
+
+"gpio" type required properties:
+ - number: phandle of the GPIO to use.
+ - enable / disable: one of these two empty properties must be present to
+ enable or disable the resource
+
+Example
+-------
+Here are example sequences declared within a backlight device that use all the
+supported resources types:
+
+ backlight {
+ compatible = "pwm-backlight";
+ ...
+
+ /* resources used by the power sequences */
+ pwms = <&pwm 2 5000000>;
+ pwm-names = "backlight";
+ power-supply = <&backlight_reg>;
+
+ power-sequences {
+ power-on {
+ step0 {
+ type = "regulator";
+ id = "power";
+ enable;
+ };
+ step1 {
+ type = "delay";
+ delay_us = <10000>;
+ };
+ step2 {
+ type = "pwm";
+ id = "backlight";
+ enable;
+ };
+ step3 {
+ type = "gpio";
+ number = <&gpio 28 0>;
+ enable;
+ };
+ };
+
+ power-off {
+ step0 {
+ type = "gpio";
+ number = <&gpio 28 0>;
+ disable;
+ };
+ step1 {
+ type = "pwm";
+ id = "backlight";
+ disable;
+ };
+ step2 {
+ type = "delay";
+ delay_us = <10000>;
+ };
+ step3 {
+ type = "regulator";
+ id = "power";
+ disable;
+ };
+ };
+ };
+ };
+
+The first part lists the PWM and regulator resources used by the sequences.
+These resources will be requested on behalf of the backlight device when the
+sequences are built and are declared according to their own framework in a way
+that makes them accessible by name.
+
+After the resources declaration, two sequences follow for powering the backlight
+on and off. Their names are specified by the pwm-backlight driver.
diff --git a/Documentation/power/power_seq.txt b/Documentation/power/power_seq.txt
new file mode 100644
index 0000000..48d1f6b
--- /dev/null
+++ b/Documentation/power/power_seq.txt
@@ -0,0 +1,225 @@
+Runtime Interpreted Power Sequences
+===================================
+
+Problem
+-------
+Very commonly, boards need the help of out-of-driver code to turn some of their
+devices on and off. For instance, SoC boards very commonly use a GPIO
+(abstracted to a regulator or not) to control the power supply of a backlight,
+disabling it when the backlight is not used in order to save power. The GPIO
+that should be used, however, as well as the exact power sequence that may
+also involve other resources, is board-dependent and thus unknown to the driver.
+
+This was previously addressed by having hooks in the device's platform data that
+are called whenever the state of the device might reflect a power change. This
+approach, however, introduces board-dependant code into the kernel and is not
+compatible with the device tree.
+
+The Runtime Interpreted Power Sequences (or power sequences for short) aim at
+turning this code into platform data or device tree nodes. Power sequences are
+described using a simple format and run by a lightweight interpreter whenever
+needed. This allows to remove the callback mechanism and makes the kernel less
+board-dependant.
+
+What are Power Sequences?
+-------------------------
+Power sequences are a series of sequential steps during which an action is
+performed on a resource. The supported resources and actions operations are:
+- delay (just wait for a given number of microseconds)
+- GPIO (enable or disable)
+- regulator (enable or disable)
+- PWM (enable or disable)
+
+When a power sequence is run, each of its steps is executed sequentially until
+one step fails or the end of the sequence is reached.
+
+Power sequences are grouped in "sets" and declared per-device. Every sequence
+must be attributed a name that can be used to retrieve it from its set when it
+is needed.
+
+Power sequences can be declared as platform data or in the device tree.
+
+Platform Data Format
+--------------------
+All relevant data structures for declaring power sequences are located in
+include/linux/power_seq.h.
+
+The platform data for a given device is an instance of platform_power_seq_set
+which points to instances of platform_power_seq. Every platform_power_seq is a
+single power sequence, and is itself composed of a variable length array of
+steps.
+
+A step is a union of all the step structures. Which one is to be used depends on
+the type of the step. Step structures are documented in the
+include/linux/power_seq.h file ; please refer to it for all details, but the
+following example will probably make it clear how power sequences should be
+defined. It defines two power sequences named "power_on" and "power_off". The
+"power_on" sequence enables a regulator called "power" (retrieved from the
+device using regulator_get()), waits for 10ms, and then enabled GPIO 110.
+"power_off" does the opposite.
+
+static struct platform_power_seq power_on_seq = {
+ .id = "power_on",
+ .num_steps = 3,
+ .steps = {
+ {
+ .type = POWER_SEQ_REGULATOR,
+ .regulator = {
+ .id = "power",
+ .enable = true,
+ },
+ },
+ {
+ .type = POWER_SEQ_DELAY,
+ .delay = {
+ .delay_us = 10000,
+ },
+ },
+ {
+ .type = POWER_SEQ_GPIO,
+ .gpio = {
+ .number = 110,
+ .enable = true,
+ },
+ },
+ },
+};
+
+static struct platform_power_seq power_off_seq = {
+ .id = "power_off",
+ .num_steps = 3,
+ .steps = {
+ {
+ .type = POWER_SEQ_GPIO,
+ .gpio = {
+ .number = 110,
+ .enable = false,
+ },
+ },
+ {
+ .type = POWER_SEQ_DELAY,
+ .delay = {
+ .delay_us = 10000,
+ },
+ },
+ {
+ .type = POWER_SEQ_REGULATOR,
+ .regulator = {
+ .id = "power",
+ .enable = false,
+ },
+ },
+ },
+};
+
+static struct platform_power_seq_set power_sequences = {
+ .num_seqs = 2,
+ .seqs = {
+ &power_on_seq,
+ &power_off_seq,
+ },
+};
+
+Device Tree
+-----------
+Power sequences can also be encoded as device tree nodes. The following
+properties and nodes are equivalent to the platform data defined previously:
+
+power-supply = <&power_reg>;
+
+power-sequences {
+ power-on {
+ step0 {
+ type = "regulator";
+ id = "power";
+ enable;
+ };
+ step1 {
+ type = "delay";
+ delay = <10000>;
+ };
+ step2 {
+ type = "gpio";
+ number = <&gpio 110 0>;
+ enable;
+ };
+ }
+ power-off {
+ step0 {
+ type = "gpio";
+ number = <&gpio 110 0>;
+ disable;
+ };
+ step1 {
+ type = "delay";
+ delay = <10000>;
+ };
+ step2 {
+ type = "regulator";
+ id = "power";
+ disable;
+ };
+ }
+};
+
+See Documentation/devicetree/bindings/power_seq/power_seq.txt for the complete
+syntax of the bindings.
+
+Usage by Drivers and Resources Management
+-----------------------------------------
+Power sequences make use of resources that must be properly allocated and
+managed. The devm_power_seq_set_build() function builds a power sequence set
+from platform data. It also takes care of resolving and allocating the resources
+referenced by the sequence:
+
+ struct power_seq_set *devm_power_seq_set_build(struct device *dev,
+ struct platform_power_seq_set *pseq);
+
+As its name states, all memory and resources are devm-allocated. The 'dev'
+argument is the device in the name of which the resources are to be allocated.
+
+On success, the function returns a devm allocated resolved sequences set for
+which all the resources are allocated. In case of failure, an error code is
+returned.
+
+Power sequences can then be retrieved by their name using power_seq_lookup:
+
+ struct power_seq *power_seq_lookup(struct power_seq_set *seqs,
+ const char *id);
+
+A power sequence can be executed by power_seq_run:
+
+ int power_seq_run(struct power_seq *seq);
+
+It returns 0 if the sequence has successfully been run, or an error code if a
+problem occured.
+
+Sometimes, you may want to browse the list of resources allocated by a sequence,
+to for instance ensure that a resource of a given type is present. The
+power_seq_set_resources() function returns a list head that can be used with
+the power_seq_for_each_resource() macro to browse all the resources of a set:
+
+ struct list_head *power_seq_set_resources(struct power_seq_set *seqs);
+ power_seq_for_each_resource(pos, seqs)
+
+Here "pos" will be of type struct power_seq_resource. This structure contains a
+"pdata" pointer that can be used to explore the platform data of this resource,
+as well as the resolved resource, if applicable.
+
+Finally, users of the device tree can build the platform data corresponding to
+the tree node using this function:
+
+ struct platform_power_seq_set *devm_of_parse_power_seq_set(struct device *dev);
+
+As the device tree syntax unambiguously states the name of the node containing
+the power sequences, it only needs a pointer to the device to work. The result
+can then be passed to devm_power_seq_set_build() in order to get a set of
+runnable sequences.
+
+devm_of_parse_power_seq_set allocates its memory using devm, but the platform
+data becomes unneeded after devm_power_seq_set_build() is called on it and can
+thus be freed. Be aware though that one allocation is performed for the set and
+for every sequence. The devm_power_seq_platform_data_free() function takes care
+of freeing the memory properly:
+
+ void devm_platform_power_seq_set_free(struct platform_power_seq_set *pseq);
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index fcc1bb0..5fdfd84 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -312,3 +312,4 @@ config AB8500_BATTERY_THERM_ON_BATCTRL
endif # POWER_SUPPLY

source "drivers/power/avs/Kconfig"
+source "drivers/power/power_seq/Kconfig"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index ee58afb..d3c893b 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -45,3 +45,4 @@ obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
obj-$(CONFIG_POWER_AVS) += avs/
obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
+obj-$(CONFIG_POWER_SEQ) += power_seq/
diff --git a/drivers/power/power_seq/Kconfig b/drivers/power/power_seq/Kconfig
new file mode 100644
index 0000000..3bff26e
--- /dev/null
+++ b/drivers/power/power_seq/Kconfig
@@ -0,0 +1,2 @@
+config POWER_SEQ
+ bool
diff --git a/drivers/power/power_seq/Makefile b/drivers/power/power_seq/Makefile
new file mode 100644
index 0000000..f77a359
--- /dev/null
+++ b/drivers/power/power_seq/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_POWER_SEQ) += power_seq.o
diff --git a/drivers/power/power_seq/power_seq.c b/drivers/power/power_seq/power_seq.c
new file mode 100644
index 0000000..e4d482c
--- /dev/null
+++ b/drivers/power/power_seq/power_seq.c
@@ -0,0 +1,446 @@
+/*
+ * power_seq.c - A simple power sequence interpreter for platform devices
+ * and device tree.
+ *
+ * Author: Alexandre Courbot <acourbot@nvidia.com>
+ *
+ * Copyright (c) 2012 NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/power_seq.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/device.h>
+
+#include <linux/of.h>
+
+struct power_seq_set {
+ struct device *dev;
+ struct list_head resources;
+ struct list_head sequences;
+};
+
+struct power_seq_step {
+ /* Copy of the platform data */
+ struct platform_power_seq_step pdata;
+ /* Resolved resource */
+ struct power_seq_resource *resource;
+};
+
+struct power_seq {
+ /* Set this sequence belongs to */
+ struct power_seq_set *parent_set;
+ const char *id;
+ /* To thread into power_seqs structure */
+ struct list_head list;
+ unsigned int num_steps;
+ struct power_seq_step steps[];
+};
+
+#define power_seq_err(dev, seq, step_nbr, format, ...) \
+ dev_err(dev, "%s[%d]: " format, seq->id, step_nbr, ##__VA_ARGS__);
+
+/**
+ * struct power_seq_res_type - operators for power sequences resources
+ * @name: Name of the resource type. Set to null when a resource
+ * type support is not compiled in
+ * @need_resource: Whether a resource needs to be allocated when steps of
+ * this kind are met. If set to false, res_compare and
+ * res_alloc need not be set
+ * @of_parse: Parse a step for this kind of resource from a device
+ * tree node. The result of parsing must be written into
+ * step step_nbr of seq
+ * @step_run: Run a step for this kind of resource
+ * @res_compare: Return true if the resource used by both steps is the
+ * same, false otherwise
+ * @res_alloc: Resolve and allocate the resource passed from seq
+ * Return error code if the resource cannot be allocated
+ */
+struct power_seq_res_ops {
+ const char *name;
+ bool need_resource;
+ int (*of_parse)(struct device *dev, struct device_node *node,
+ struct platform_power_seq *seq, unsigned int step_nbr);
+ int (*step_run)(struct power_seq_step *step);
+ bool (*res_compare)(struct platform_power_seq_step *step1,
+ struct platform_power_seq_step *step2);
+ int (*res_alloc)(struct device *dev, struct power_seq_resource *seq);
+};
+
+static const struct power_seq_res_ops power_seq_types[POWER_SEQ_NUM_TYPES];
+
+#ifdef CONFIG_OF
+static int of_power_seq_parse_enable_properties(struct device *dev,
+ struct device_node *node,
+ struct platform_power_seq *seq,
+ unsigned int step_nbr,
+ bool *enable)
+{
+ if (of_find_property(node, "enable", NULL)) {
+ *enable = true;
+ } else if (of_find_property(node, "disable", NULL)) {
+ *enable = false;
+ } else {
+ power_seq_err(dev, seq, step_nbr,
+ "missing enable or disable property\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int of_power_seq_parse_step(struct device *dev, struct device_node *node,
+ struct platform_power_seq *seq,
+ unsigned int step_nbr)
+{
+ struct platform_power_seq_step *step = &seq->steps[step_nbr];
+ const char *type;
+ int i, err;
+
+ err = of_property_read_string(node, "type", &type);
+ if (err < 0) {
+ power_seq_err(dev, seq, step_nbr,
+ "cannot read type property\n");
+ return err;
+ }
+ for (i = 0; i < POWER_SEQ_NUM_TYPES; i++) {
+ if (power_seq_types[i].name == NULL)
+ continue;
+ if (!strcmp(type, power_seq_types[i].name))
+ break;
+ }
+ if (i >= POWER_SEQ_NUM_TYPES) {
+ power_seq_err(dev, seq, step_nbr, "unknown type %s\n", type);
+ return -EINVAL;
+ }
+ step->type = i;
+ err = power_seq_types[step->type].of_parse(dev, node, seq, step_nbr);
+
+ return err;
+}
+
+static struct platform_power_seq *of_parse_power_seq(struct device *dev,
+ struct device_node *node)
+{
+ struct device_node *child = NULL;
+ struct platform_power_seq *pseq;
+ int num_steps, sz;
+ int err;
+
+ if (!node)
+ return ERR_PTR(-EINVAL);
+
+ num_steps = of_get_child_count(node);
+ sz = sizeof(*pseq) + sizeof(pseq->steps[0]) * num_steps;
+ pseq = devm_kzalloc(dev, sz, GFP_KERNEL);
+ if (!pseq)
+ return ERR_PTR(-ENOMEM);
+ pseq->num_steps = num_steps;
+ pseq->id = node->name;
+
+ for_each_child_of_node(node, child) {
+ unsigned int pos;
+
+ /* Check that the name's format is correct and within bounds */
+ if (strncmp("step", child->name, 4)) {
+ err = -EINVAL;
+ goto parse_error;
+ }
+
+ err = kstrtouint(child->name + 4, 10, &pos);
+ if (err < 0)
+ goto parse_error;
+
+ if (pos >= num_steps || pseq->steps[pos].type != 0) {
+ err = -EINVAL;
+ goto parse_error;
+ }
+
+ err = of_power_seq_parse_step(dev, child, pseq, pos);
+ if (err)
+ return ERR_PTR(err);
+ }
+
+ return pseq;
+
+parse_error:
+ dev_err(dev, "%s: invalid power step name %s!\n", pseq->id,
+ child->name);
+ return ERR_PTR(err);
+}
+
+/**
+ * of_parse_power_seq_set() - build platform data corresponding to a DT node
+ * @dev: Device on behalf of which the sequence is to be built
+ *
+ * Sequences must be contained into a subnode named "power-sequences" of the
+ * device root node.
+ *
+ * Memory for the platform sequence is allocated using devm_kzalloc on dev and
+ * can be freed by devm_kfree after power_seq_set_build returned. Beware that on
+ * top of the set itself, platform data for individual sequences should also be
+ * freed.
+ *
+ * Returns the built power sequence set on success, or an error code in case of
+ * failure.
+ */
+struct platform_power_seq_set *devm_of_parse_power_seq_set(struct device *dev)
+{
+ struct platform_power_seq_set *seqs;
+ struct device_node *root = dev->of_node;
+ struct device_node *seq;
+ int num_seqs, sz, i = 0;
+
+ if (!root)
+ return NULL;
+
+ root = of_find_node_by_name(root, "power-sequences");
+ if (!root)
+ return NULL;
+
+ num_seqs = of_get_child_count(root);
+ sz = sizeof(*seqs) + sizeof(seqs->seqs[0]) * num_seqs;
+ seqs = devm_kzalloc(dev, sz, GFP_KERNEL);
+ if (!seqs)
+ return ERR_PTR(-ENOMEM);
+ seqs->num_seqs = num_seqs;
+
+ for_each_child_of_node(root, seq) {
+ struct platform_power_seq *pseq;
+
+ pseq = of_parse_power_seq(dev, seq);
+ if (IS_ERR(pseq))
+ return (void *)pseq;
+
+ seqs->seqs[i++] = pseq;
+ }
+
+ return seqs;
+}
+EXPORT_SYMBOL_GPL(devm_of_parse_power_seq_set);
+#endif /* CONFIG_OF */
+
+/**
+ * devm_platform_power_seq_set_free() - free data allocated by of_parse_power_seq_set
+ * @pseq: Platform data to free
+ *
+ * This function can be called *only* on data returned by of_parse_power_seq_set
+ * and *after* devm_power_seq_set_build has been called on it.
+ */
+void devm_platform_power_seq_set_free(struct device *dev,
+ struct platform_power_seq_set *pseq)
+{
+ int i;
+
+ for (i = 0; i < pseq->num_seqs; i++)
+ devm_kfree(dev, pseq->seqs[i]);
+
+ devm_kfree(dev, pseq);
+}
+EXPORT_SYMBOL_GPL(devm_platform_power_seq_set_free);
+
+static struct power_seq_resource *
+power_seq_find_resource(struct list_head *ress,
+ struct platform_power_seq_step *step)
+{
+ struct power_seq_resource *res;
+
+ list_for_each_entry(res, ress, list) {
+ struct platform_power_seq_step *pdata = res->pdata;
+
+ if (pdata->type != step->type)
+ continue;
+
+ if (power_seq_types[pdata->type].res_compare(pdata, step))
+ return res;
+ }
+
+ return NULL;
+}
+
+static struct power_seq *power_seq_build_one(struct device *dev,
+ struct power_seq_set *seqs,
+ struct platform_power_seq *pseq)
+{
+ struct power_seq *seq;
+ struct power_seq_resource *res;
+ int i, err;
+
+ seq = devm_kzalloc(dev, sizeof(*seq) + sizeof(seq->steps[0]) *
+ pseq->num_steps, GFP_KERNEL);
+ if (!seq)
+ return ERR_PTR(-ENOMEM);
+
+ INIT_LIST_HEAD(&seq->list);
+ seq->parent_set = seqs;
+ seq->num_steps = pseq->num_steps;
+ seq->id = pseq->id;
+
+ for (i = 0; i < seq->num_steps; i++) {
+ struct platform_power_seq_step *pstep = &pseq->steps[i];
+ struct power_seq_step *step = &seq->steps[i];
+
+ if (pstep->type >= POWER_SEQ_NUM_TYPES ||
+ power_seq_types[pstep->type].name == NULL) {
+ power_seq_err(dev, seq, i,
+ "invalid power sequence type %d!",
+ pstep->type);
+ return ERR_PTR(-EINVAL);
+ }
+
+ memcpy(&step->pdata, pstep, sizeof(step->pdata));
+
+ /* Steps without resource need not to continue */
+ if (!power_seq_types[pstep->type].need_resource)
+ continue;
+
+ /* create resource node if not referenced already */
+ res = power_seq_find_resource(&seqs->resources, pstep);
+ if (!res) {
+ res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL);
+ if (!res)
+ return ERR_PTR(-ENOMEM);
+
+ res->pdata = &step->pdata;
+
+ err = power_seq_types[res->pdata->type].res_alloc(dev, res);
+ if (err < 0) {
+ power_seq_err(dev, seq, i,
+ "error building sequence\n");
+ return ERR_PTR(err);
+ }
+
+ list_add_tail(&res->list, &seqs->resources);
+ }
+ step->resource = res;
+ }
+
+ return seq;
+}
+
+/**
+ * power_seq_set_build() - build a set of runnable sequences from platform data
+ * @dev: Device that will use the power sequences. All resources will be
+ * devm-allocated against it
+ * @pseq: Platform data for the power sequences. It can be freed after
+ * this function returns
+ *
+ * All memory and resources (regulators, GPIOs, etc.) are allocated using devm
+ * functions.
+ *
+ * Returns the built sequence on success, an error code in case or failure.
+ */
+struct power_seq_set *devm_power_seq_set_build(struct device *dev,
+ struct platform_power_seq_set *pseq)
+{
+ struct power_seq_set *seqs;
+ int i;
+
+ seqs = devm_kzalloc(dev, sizeof(*seqs), GFP_KERNEL);
+
+ if (!seqs)
+ return ERR_PTR(-ENOMEM);
+
+ INIT_LIST_HEAD(&seqs->resources);
+ INIT_LIST_HEAD(&seqs->sequences);
+ for (i = 0; i < pseq->num_seqs; i++) {
+ struct power_seq *seq;
+
+ seq = power_seq_build_one(dev, seqs, pseq->seqs[i]);
+ if (IS_ERR(seq))
+ return (void *)seq;
+
+ list_add_tail(&seq->list, &seqs->sequences);
+ }
+
+ return seqs;
+}
+EXPORT_SYMBOL_GPL(devm_power_seq_set_build);
+
+/**
+ * power_seq_lookup - Lookup a power sequence by name from a set
+ * @seqs: The set to look in
+ * @id: Name to look after
+ *
+ * Returns a matching power sequence if it exists, NULL if it does not.
+ */
+struct power_seq *power_seq_lookup(struct power_seq_set *seqs, const char *id)
+{
+ struct power_seq *seq;
+
+ list_for_each_entry(seq, &seqs->sequences, list) {
+ if (!strcmp(seq->id, id))
+ return seq;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(power_seq_lookup);
+
+/**
+ * power_seq_set_resources - return a list of all the resources used by a set
+ * @seqs: Power sequences set we are interested in getting the resources
+ *
+ * The returned list can be parsed using the power_seq_for_each_resource macro.
+ */
+struct list_head *power_seq_set_resources(struct power_seq_set *seqs)
+{
+ return &seqs->resources;
+}
+EXPORT_SYMBOL_GPL(power_seq_set_resources);
+
+/**
+ * power_seq_run() - run a power sequence
+ * @seq: The power sequence to run
+ *
+ * Returns 0 on success, error code in case of failure.
+ */
+int power_seq_run(struct power_seq *seq)
+{
+ unsigned int i;
+ int err;
+
+ if (!seq)
+ return 0;
+
+ for (i = 0; i < seq->num_steps; i++) {
+ unsigned int type = seq->steps[i].pdata.type;
+
+ err = power_seq_types[type].step_run(&seq->steps[i]);
+ if (err) {
+ power_seq_err(seq->parent_set->dev, seq, i,
+ "error %d while running power sequence step\n",
+ err);
+ return err;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(power_seq_run);
+
+#include "power_seq_delay.c"
+#include "power_seq_regulator.c"
+#include "power_seq_pwm.c"
+#include "power_seq_gpio.c"
+
+static const struct power_seq_res_ops power_seq_types[POWER_SEQ_NUM_TYPES] = {
+ [POWER_SEQ_DELAY] = POWER_SEQ_DELAY_TYPE,
+ [POWER_SEQ_REGULATOR] = POWER_SEQ_REGULATOR_TYPE,
+ [POWER_SEQ_PWM] = POWER_SEQ_PWM_TYPE,
+ [POWER_SEQ_GPIO] = POWER_SEQ_GPIO_TYPE,
+};
+
+MODULE_AUTHOR("Alexandre Courbot <acourbot@nvidia.com>");
+MODULE_DESCRIPTION("Runtime Interpreted Power Sequences");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/power_seq/power_seq_delay.c b/drivers/power/power_seq/power_seq_delay.c
new file mode 100644
index 0000000..072bf50
--- /dev/null
+++ b/drivers/power/power_seq/power_seq_delay.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2012 NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/delay.h>
+
+#ifdef CONFIG_OF
+static int of_power_seq_parse_delay(struct device *dev,
+ struct device_node *node,
+ struct platform_power_seq *seq,
+ unsigned int step_nbr)
+{
+ struct platform_power_seq_step *step = &seq->steps[step_nbr];
+ int err;
+
+ err = of_property_read_u32(node, "delay_us",
+ &step->delay.delay_us);
+ if (err < 0)
+ power_seq_err(dev, seq, step_nbr,
+ "error reading delay_us property\n");
+
+ return err;
+}
+#else
+#define of_power_seq_parse_delay NULL
+#endif
+
+static int power_seq_step_run_delay(struct power_seq_step *step)
+{
+ usleep_range(step->pdata.delay.delay_us,
+ step->pdata.delay.delay_us + 1000);
+
+ return 0;
+}
+
+#define POWER_SEQ_DELAY_TYPE { \
+ .name = "delay", \
+ .need_resource = false, \
+ .of_parse = of_power_seq_parse_delay, \
+ .step_run = power_seq_step_run_delay, \
+}
diff --git a/drivers/power/power_seq/power_seq_gpio.c b/drivers/power/power_seq/power_seq_gpio.c
new file mode 100644
index 0000000..2e9a49f
--- /dev/null
+++ b/drivers/power/power_seq/power_seq_gpio.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2012 NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+
+#ifdef CONFIG_OF
+static int power_seq_of_parse_gpio(struct device *dev,
+ struct device_node *node,
+ struct platform_power_seq *seq,
+ unsigned int step_nbr)
+{
+ struct platform_power_seq_step *step = &seq->steps[step_nbr];
+ int gpio;
+ int err;
+
+ gpio = of_get_named_gpio(node, "number", 0);
+ if (gpio < 0) {
+ power_seq_err(dev, seq, step_nbr,
+ "error reading number property\n");
+ return gpio;
+ }
+ step->gpio.number = gpio;
+
+ err = of_power_seq_parse_enable_properties(dev, node, seq, step_nbr,
+ &step->gpio.enable);
+
+ return err;
+}
+#else
+#define of_power_seq_parse_gpio NULL
+#endif
+
+static bool power_seq_res_compare_gpio(struct platform_power_seq_step *step1,
+ struct platform_power_seq_step *step2)
+{
+ return step1->gpio.number == step2->gpio.number;
+}
+
+static int power_seq_res_alloc_gpio(struct device *dev,
+ struct power_seq_resource *res)
+{
+ int err;
+
+ err = devm_gpio_request_one(dev, res->pdata->gpio.number,
+ GPIOF_OUT_INIT_LOW, dev_name(dev));
+ if (err) {
+ dev_err(dev, "cannot get gpio %d\n", res->pdata->gpio.number);
+ return err;
+ }
+
+ return 0;
+}
+
+static int power_seq_step_run_gpio(struct power_seq_step *step)
+{
+ gpio_set_value_cansleep(step->pdata.gpio.number,
+ step->pdata.gpio.enable);
+
+ return 0;
+}
+
+#define POWER_SEQ_GPIO_TYPE { \
+ .name = "gpio", \
+ .need_resource = true, \
+ .of_parse = power_seq_of_parse_gpio, \
+ .step_run = power_seq_step_run_gpio, \
+ .res_compare = power_seq_res_compare_gpio, \
+ .res_alloc = power_seq_res_alloc_gpio, \
+}
diff --git a/drivers/power/power_seq/power_seq_pwm.c b/drivers/power/power_seq/power_seq_pwm.c
new file mode 100644
index 0000000..a80514f
--- /dev/null
+++ b/drivers/power/power_seq/power_seq_pwm.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright (c) 2012 NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifdef CONFIG_PWM
+
+#include <linux/pwm.h>
+
+#ifdef CONFIG_OF
+static int power_seq_of_parse_pwm(struct device *dev,
+ struct device_node *node,
+ struct platform_power_seq *seq,
+ unsigned int step_nbr)
+{
+ struct platform_power_seq_step *step = &seq->steps[step_nbr];
+ int err;
+
+ err = of_property_read_string(node, "id",
+ &step->pwm.id);
+ if (err) {
+ power_seq_err(dev, seq, step_nbr,
+ "error reading id property\n");
+ return err;
+ }
+
+ err = of_power_seq_parse_enable_properties(dev, node, seq, step_nbr,
+ &step->pwm.enable);
+ return err;
+}
+#else
+#define of_power_seq_parse_pwm NULL
+#endif
+
+static bool power_seq_res_compare_pwm(struct platform_power_seq_step *step1,
+ struct platform_power_seq_step *step2)
+{
+ return (!strcmp(step1->pwm.id, step2->pwm.id));
+}
+
+static int power_seq_res_alloc_pwm(struct device *dev,
+ struct power_seq_resource *res)
+{
+ res->pwm = devm_pwm_get(dev, res->pdata->pwm.id);
+ if (IS_ERR(res->pwm)) {
+ dev_err(dev, "cannot get pwm \"%s\"\n", res->pdata->pwm.id);
+ return PTR_ERR(res->pwm);
+ }
+
+ return 0;
+}
+
+static int power_seq_step_run_pwm(struct power_seq_step *step)
+{
+ if (step->pdata.gpio.enable) {
+ return pwm_enable(step->resource->pwm);
+ } else {
+ pwm_disable(step->resource->pwm);
+ return 0;
+ }
+}
+
+#define POWER_SEQ_PWM_TYPE { \
+ .name = "pwm", \
+ .need_resource = true, \
+ .of_parse = power_seq_of_parse_pwm, \
+ .step_run = power_seq_step_run_pwm, \
+ .res_compare = power_seq_res_compare_pwm, \
+ .res_alloc = power_seq_res_alloc_pwm, \
+}
+
+#else
+
+#define POWER_SEQ_PWM_TYPE {}
+
+#endif
diff --git a/drivers/power/power_seq/power_seq_regulator.c b/drivers/power/power_seq/power_seq_regulator.c
new file mode 100644
index 0000000..915eac1
--- /dev/null
+++ b/drivers/power/power_seq/power_seq_regulator.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright (c) 2012 NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifdef CONFIG_REGULATOR
+
+#include <linux/regulator/consumer.h>
+
+/* TODO change "which" */
+#ifdef CONFIG_OF
+static int power_seq_of_parse_regulator(struct device *dev,
+ struct device_node *node,
+ struct platform_power_seq *seq,
+ unsigned int step_nbr)
+{
+ struct platform_power_seq_step *step = &seq->steps[step_nbr];
+ int err;
+
+ err = of_property_read_string(node, "id",
+ &step->regulator.id);
+ if (err) {
+ power_seq_err(dev, seq, step_nbr,
+ "error reading id property\n");
+ return err;
+ }
+
+ err = of_power_seq_parse_enable_properties(dev, node, seq, step_nbr,
+ &step->regulator.enable);
+ return err;
+}
+#else
+#define of_power_seq_parse_regulator NULL
+#endif
+
+static bool
+power_seq_res_compare_regulator(struct platform_power_seq_step *step1,
+ struct platform_power_seq_step *step2)
+{
+ return (!strcmp(step1->regulator.id, step2->regulator.id));
+}
+
+static int power_seq_res_alloc_regulator(struct device *dev,
+ struct power_seq_resource *res)
+{
+ res->regulator = devm_regulator_get(dev, res->pdata->regulator.id);
+ if (IS_ERR(res->regulator)) {
+ dev_err(dev, "cannot get regulator \"%s\"\n",
+ res->pdata->regulator.id);
+ return PTR_ERR(res->regulator);
+ }
+
+ return 0;
+}
+
+static int power_seq_step_run_regulator(struct power_seq_step *step)
+{
+ if (step->pdata.regulator.enable)
+ return regulator_enable(step->resource->regulator);
+ else
+ return regulator_disable(step->resource->regulator);
+}
+
+#define POWER_SEQ_REGULATOR_TYPE { \
+ .name = "regulator", \
+ .need_resource = true, \
+ .of_parse = power_seq_of_parse_regulator, \
+ .step_run = power_seq_step_run_regulator, \
+ .res_compare = power_seq_res_compare_regulator, \
+ .res_alloc = power_seq_res_alloc_regulator, \
+}
+
+#else
+
+#define POWER_SEQ_REGULATOR_TYPE {}
+
+#endif
diff --git a/include/linux/power_seq.h b/include/linux/power_seq.h
new file mode 100644
index 0000000..78e8d77
--- /dev/null
+++ b/include/linux/power_seq.h
@@ -0,0 +1,174 @@
+/*
+ * power_seq.h
+ *
+ * Simple interpreter for defining power sequences as platform data or device
+ * tree properties.
+ *
+ * Power sequences are designed to replace the callbacks typically used in
+ * board-specific files that implement board-specific power sequences of devices
+ * such as backlights. A power sequence is an array of resources (which can a
+ * regulator, a GPIO, a PWM, ...) with an action to perform on it (enable or
+ * disable) and optional pre and post step delays. By having them interpreted
+ * instead of arbitrarily executed, it is possible to describe these in the
+ * device tree and thus remove board-specific code from the kernel.
+ *
+ * Author: Alexandre Courbot <acourbot@nvidia.com>
+ *
+ * Copyright (c) 2012 NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef __LINUX_POWER_SEQ_H
+#define __LINUX_POWER_SEQ_H
+
+#include <linux/types.h>
+
+struct device;
+struct regulator;
+struct pwm_device;
+struct device_node;
+
+/**
+ * The different kinds of resources that can be controlled during the sequences.
+ */
+enum power_seq_res_type {
+ POWER_SEQ_DELAY,
+ POWER_SEQ_REGULATOR,
+ POWER_SEQ_PWM,
+ POWER_SEQ_GPIO,
+ POWER_SEQ_NUM_TYPES,
+};
+
+/**
+ * struct platform_power_seq_delay_step - platform data for delay steps
+ * @delay_us: Amount of time to wait, in microseconds.
+ */
+struct platform_power_seq_delay_step {
+ unsigned int delay_us;
+};
+
+/**
+ * struct platform_power_seq_regulator_step - platform data for regulator steps
+ * @id: Name of the regulator to use. The regulator will be obtained
+ * using devm_regulator_get(dev, name)
+ * @enable: Whether to enable or disable the regulator during this step
+ */
+struct platform_power_seq_regulator_step {
+ const char *id;
+ bool enable;
+};
+
+/**
+ * struct platform_power_seq_pwm_step - platform data for PWM steps
+ * @id: Name of the pwm to use. The PWM will be obtained using
+ * devm_pwm_get(dev, name)
+ * @enable: Whether to enable or disable the PWM during this step
+ */
+struct platform_power_seq_pwm_step {
+ const char *id;
+ bool enable;
+};
+
+/**
+ * struct platform_power_seq_gpio_step - platform data for GPIO steps
+ * @number: Number of the GPIO to use. The GPIO will be obtained using
+ * devm_gpio_request_one(dev, number)
+ * @enable: Whether to enable or disable the GPIO during this step
+ */
+struct platform_power_seq_gpio_step {
+ int number;
+ bool enable;
+};
+
+/**
+ * struct platform_power_seq_step - platform data for power sequences steps
+ * @type: The type of this step. This decides which member of the union is
+ * valid for this step.
+ * @delay: Used if type == POWER_SEQ_DELAY
+ * @regulator: Used if type == POWER_SEQ_REGULATOR
+ * @pwm: Used if type == POWER_SEQ_PWN
+ * @gpio: Used if type == POWER_SEQ_GPIO
+ */
+struct platform_power_seq_step {
+ enum power_seq_res_type type;
+ union {
+ struct platform_power_seq_delay_step delay;
+ struct platform_power_seq_regulator_step regulator;
+ struct platform_power_seq_pwm_step pwm;
+ struct platform_power_seq_gpio_step gpio;
+ };
+};
+
+/**
+ * struct platform_power_seq - platform data for power sequences
+ * @id: Name through which this sequence is refered
+ * @num_steps: Number of steps in that sequence
+ * @steps: Array of num_steps steps describing the sequence
+ */
+struct platform_power_seq {
+ const char *id;
+ unsigned int num_steps;
+ struct platform_power_seq_step steps[];
+};
+
+/**
+ * struct platform_power_seq_set - platform data for sets of sequences
+ * @num_seqs: Number of sequences in this set
+ * @seqs: Array of pointers to individual sequences
+ */
+struct platform_power_seq_set {
+ unsigned int num_seqs;
+ struct platform_power_seq* seqs[];
+};
+
+/**
+ * struct power_seq_resource - resource used by a power sequence set
+ * @pdata: Pointer to the platform data used to resolve this resource
+ * @regulator: Resolved regulator if of type POWER_SEQ_REGULATOR
+ * @pwm: Resolved PWM if of type POWER_SEQ_PWM
+ * @list: Used to link resources together
+ */
+struct power_seq_resource {
+ /* relevant for resolving the resource and knowing its type */
+ struct platform_power_seq_step *pdata;
+ /* resolved resource (if any) */
+ union {
+ struct regulator *regulator;
+ struct pwm_device *pwm;
+ };
+ struct list_head list;
+};
+#define power_seq_for_each_resource(pos, seqs) \
+ list_for_each_entry(pos, power_seq_set_resources(seqs), list)
+
+struct power_seq_resource;
+struct power_seq;
+struct power_seq_set;
+
+#ifdef CONFIG_OF
+struct platform_power_seq_set *devm_of_parse_power_seq_set(struct device *dev);
+#else
+inline struct platform_power_seq_set *of_parse_power_seq_set(struct device *dev)
+{
+ return NULL;
+}
+#endif
+void devm_platform_power_seq_set_free(struct device *dev,
+ struct platform_power_seq_set *pseq);
+
+struct power_seq_set *devm_power_seq_set_build(struct device *dev,
+ struct platform_power_seq_set *pseq);
+struct list_head *power_seq_set_resources(struct power_seq_set *seqs);
+struct power_seq *power_seq_lookup(struct power_seq_set *seqs, const char *id);
+int power_seq_run(struct power_seq *seq);
+
+#endif
--
1.7.12


\
 
 \ /
  Last update: 2012-08-31 14:21    [W:0.159 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site