lkml.org 
[lkml]   [2012]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[BUGFIX 2/4] PCI/PM: Keep parent bridge active when probing device
Date
This patch fixes the following bug:

http://marc.info/?l=linux-pci&m=134329923124234&w=2

The root cause of the bug is as follow.

If a device is not bound with the corresponding driver, the device
runtime PM will be disabled and the device will be put into suspended
state. So that, the bridge/PCIe port connected to it may be put into
suspended and low power state. When do probing for the device later,
because the bridge/PCIe port connected to it is in low power state,
the IO access to device may fail.

To solve the issue, the bridge/PCIe port connected to the device is
put into active state before probing.

Reported-by: Bjorn Mork <bjorn@mork.no>
Signed-off-by: Huang Ying <ying.huang@intel.com>
---
drivers/pci/pci-driver.c | 6 ++++++
1 file changed, 6 insertions(+)

--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -280,8 +280,12 @@ static long local_pci_probe(void *_ddi)
{
struct drv_dev_and_id *ddi = _ddi;
struct device *dev = &ddi->dev->dev;
+ struct device *parent = dev->parent;
int rc;

+ /* The parent bridge must be in active state when probing */
+ if (parent)
+ pm_runtime_get_sync(parent);
/* Unbound PCI devices are always set to disabled and suspended.
* During probe, the device is set to enabled and active and the
* usage count is incremented. If the driver supports runtime PM,
@@ -298,6 +302,8 @@ static long local_pci_probe(void *_ddi)
pm_runtime_set_suspended(dev);
pm_runtime_put_noidle(dev);
}
+ if (parent)
+ pm_runtime_put(parent);
return rc;
}


\
 
 \ /
  Last update: 2012-08-03 09:21    [W:0.127 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site