lkml.org 
[lkml]   [2012]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v11 4/4] G45 TWI: remove open drain setting for twi function gpios
The G45 datasheets explicitly states that setting the open drain property
on peripheral function gpios is not allowed. (How about other A91 chips?)

Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
---
arch/arm/mach-at91/at91sam9g45_devices.c | 6 ------
1 file changed, 6 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index eec5eb6..2134663 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -686,18 +686,12 @@ void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, in
/* pins used for TWI interface */
if (i2c_id == 0) {
at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA20, 1);
-
at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA21, 1);

platform_device_register(&at91sam9g45_twi0_device);
} else {
at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PB10, 1);
-
at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PB11, 1);

platform_device_register(&at91sam9g45_twi1_device);
}
--
1.7.9.5


\
 
 \ /
  Last update: 2012-08-29 11:01    [W:1.827 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site