lkml.org 
[lkml]   [2012]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Storage related regression in linux-next 20120824
Hi,

On 08/27/2012 04:40 PM, Jeff Garzik wrote:
> On Mon, Aug 27, 2012 at 4:59 AM, Arvydas Sidorenko <asido4@gmail.com> wrote:
>> linux-next 20120824 introduced regression on Mac mini 2011 - /root partition
>> gets mounted as read-only and it stays so even when trying to reboot into
>> previously working kernel. In order to make it work on older kernel again
>> `fsck` needs to be executed:
>> ----------------------------------------------------------------------
>> Root partition uses ext4 filesystem on Intel 330 SSD connected to SATA3.
>> dmesg shows that journaling was disabled:
>> ----------------------------------------------------------------------
>> I haven't bisected to which exactly tree introduces the regression,
>> but I can tell
>> that linux-next 20120813 and v3.6-rc3 work fine.

I think I experienced this with v3.6-rc3 today as well. I thought my ssd
(ocz vertex3) was broken first, but then I saw this mail.

Never happened before on 3.5.something.

I am trying to reproduce it right now, it happened 2 times before I read
the mail, I didnt keep the dmesg. Now it's taking it's time to occurr
again...

Anyway, here comes lspci, and a dmesg (without the problem showing up
yet) is attached.

Cheers,

Dieter

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series
Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network
Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 2 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 5 (rev b4)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 7 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC
Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205
(rev 34)
0d:00.0 SD Host controller: Ricoh Co Ltd PCIe SDXC/MMC Host Controller
(rev ff)
0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host
Controller (rev ff)



>
> Can you pastebin 'dmesg' and 'lspci'? Did this occur only once, or is
> it reproducible?
>
> Jeff
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>


[ 0.375270] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.375274] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.375279] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.375283] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.375288] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.375292] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.375297] pnp 00:02: [io 0x0050-0x0053]
[ 0.375302] pnp 00:02: [io 0x0072-0x0077]
[ 0.375306] pnp 00:02: [io 0x0400-0x047f]
[ 0.375311] pnp 00:02: [io 0x0500-0x057f]
[ 0.375315] pnp 00:02: [io 0x0800-0x080f]
[ 0.375320] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.375325] pnp 00:02: [io 0x1600-0x167f]
[ 0.375330] pnp 00:02: [mem 0xf8000000-0xfbffffff]
[ 0.375335] pnp 00:02: [mem 0x00000000-0x00000fff]
[ 0.375340] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.375345] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.375350] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.375355] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.375359] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.375603] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.375697] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.375828] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.375921] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.376013] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.376106] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.376203] system 00:02: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.376298] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.376394] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.376488] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.376582] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.376676] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.376783] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.376914] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.377072] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.377112] pnp 00:04: [io 0x0000-0x000f]
[ 0.377121] pnp 00:04: [io 0x0080-0x008f]
[ 0.377129] pnp 00:04: [io 0x00c0-0x00df]
[ 0.377137] pnp 00:04: [dma 4]
[ 0.377306] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.377332] pnp 00:05: [io 0x0061]
[ 0.377480] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.377508] pnp 00:06: [io 0x00f0]
[ 0.377529] pnp 00:06: [irq 13]
[ 0.377677] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.377703] pnp 00:07: [io 0x0070-0x0071]
[ 0.377717] pnp 00:07: [irq 8]
[ 0.377911] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.377940] pnp 00:08: [io 0x0060]
[ 0.377944] pnp 00:08: [io 0x0064]
[ 0.377956] pnp 00:08: [irq 1]
[ 0.378103] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.378135] pnp 00:09: [irq 12]
[ 0.378289] pnp 00:09: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[ 0.378389] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.378541] pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.379433] pnp: PnP ACPI: found 11 devices
[ 0.379518] ACPI: ACPI bus type pnp unregistered
[ 0.395395] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.395510] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.395606] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.395726] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.395817] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.395915] pci 0000:00:1c.4: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.396013] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.396138] pci 0000:00:1c.6: PCI bridge to [bus 0e]
[ 0.396232] pci 0000:00:1c.6: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 0.396409] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.396415] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.396421] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.396427] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[ 0.396432] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[ 0.396438] pci_bus 0000:03: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.396444] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.396449] pci_bus 0000:0d: resource 1 [mem 0xf0d00000-0xf14fffff]
[ 0.396454] pci_bus 0000:0d: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.396460] pci_bus 0000:0e: resource 1 [mem 0xf0c00000-0xf0cfffff]
[ 0.396594] NET: Registered protocol family 2
[ 0.397157] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.399058] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.399480] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.399781] TCP: reno registered
[ 0.399866] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.400022] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.400384] NET: Registered protocol family 1
[ 0.400498] pci 0000:00:02.0: Boot video device
[ 0.400824] PCI: CLS 64 bytes, default 64
[ 0.400869] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.400965] software IO TLB [mem 0xd6995000-0xda994fff] (64MB) mapped at [ffff8800d6995000-ffff8800da994fff]
[ 0.403861] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x17
[ 0.403966] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x17
[ 0.404078] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x17
[ 0.404187] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x17
[ 0.404424] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.405309] audit: initializing netlink socket (disabled)
[ 0.405415] type=2000 audit(1346081177.281:1): initialized
[ 0.407511] VFS: Disk quotas dquot_6.5.2
[ 0.407650] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.408283] NTFS driver 2.1.30 [Flags: R/W].
[ 0.408434] fuse init (API version 7.20)
[ 0.408982] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.409504] OCFS2 1.5.0
[ 0.409727] ocfs2: Registered cluster interface o2cb
[ 0.409830] OCFS2 DLMFS 1.5.0
[ 0.409988] OCFS2 User DLM kernel interface loaded
[ 0.410076] OCFS2 Node Manager 1.5.0
[ 0.410419] OCFS2 DLM 1.5.0
[ 0.410878] Btrfs loaded
[ 0.411289] GFS2 installed
[ 0.411378] msgmni has been set to 15750
[ 0.412047] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.412162] io scheduler noop registered
[ 0.412246] io scheduler deadline registered (default)
[ 0.412359] io scheduler cfq registered
[ 0.414057] intel_idle: MWAIT substates: 0x21120
[ 0.414063] intel_idle: v0.4 model 0x2A
[ 0.414066] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.414334] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.414847] ACPI: AC Adapter [AC] (off-line)
[ 0.415462] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.415819] ACPI: Lid Switch [LID]
[ 0.416106] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.418319] ACPI: Sleep Button [SLPB]
[ 0.418627] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.418789] ACPI: Power Button [PWRF]
[ 0.419244] ACPI: Requesting acpi_cpufreq
[ 0.432027] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.432119] ACPI: Thermal Zone [THM0] (50 C)
[ 0.432758] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.434279] Real Time Clock Driver v1.12b
[ 0.434995] Non-volatile memory driver v1.3
[ 0.435235] Linux agpgart interface v0.103
[ 0.435770] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.446262] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.446426] ACPI: Battery Slot [BAT0] (battery present)
[ 0.471671] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
[ 0.471983] [drm] Initialized drm 1.1.0 20060810
[ 0.472843] pci 0000:00:00.0: Intel Sandybridge Chipset
[ 0.473033] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.476204] pci 0000:00:00.0: detected 65536K stolen memory
[ 0.476397] i915 0000:00:02.0: setting latency timer to 64
[ 0.526478] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.526502] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.526625] [drm] Driver supports precise vblank timestamp query.
[ 0.526859] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.934558] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 1.033525] fbcon: inteldrmfb (fb0) is primary device
[ 1.401426] tsc: Refined TSC clocksource calibration: 2691.258 MHz
[ 1.401432] Switching to clocksource tsc
[ 1.431063] Console: switching to colour frame buffer device 170x48
[ 1.442527] fb0: inteldrmfb frame buffer device
[ 1.442607] drm: registered panic notifier
[ 1.449896] acpi device:01: registered as cooling_device4
[ 1.450256] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.450592] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.450896] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.456160] brd: module loaded
[ 1.458893] loop: module loaded
[ 1.458956] Uniform Multi-Platform E-IDE driver
[ 1.470790] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 1.470984] Probing IDE interface ide0...
[ 1.982863] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.982995] Probing IDE interface ide1...
[ 2.495195] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.495391] ide-gd driver 1.18
[ 2.495524] ide-cd driver 5.00
[ 2.495859] ahci 0000:00:1f.2: version 3.0
[ 2.495979] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 2.496241] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 2.496388] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst
[ 2.496539] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.499149] scsi0 : ahci
[ 2.499497] scsi1 : ahci
[ 2.499807] scsi2 : ahci
[ 2.500182] scsi3 : ahci
[ 2.500493] scsi4 : ahci
[ 2.504383] scsi5 : ahci
[ 2.508209] ata1: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628100 irq 41
[ 2.511868] ata2: DUMMY
[ 2.515445] ata3: DUMMY
[ 2.518974] ata4: DUMMY
[ 2.522431] ata5: DUMMY
[ 2.525848] ata6: DUMMY
[ 2.529904] tun: Universal TUN/TAP device driver, 1.6
[ 2.533343] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.536899] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 2.540295] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 2.543713] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.543871] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.547440] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 2.740513] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:62:27:e9
[ 2.744048] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.747570] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 2.751186] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.754797] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.754806] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.758253] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.765668] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.769066] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.769105] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf162a000
[ 2.777649] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.781395] hub 1-0:1.0: USB hub found
[ 2.784651] hub 1-0:1.0: 3 ports detected
[ 2.788015] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.788023] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.791201] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.798339] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.801485] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.801521] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1629000
[ 2.810604] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.814160] hub 2-0:1.0: USB hub found
[ 2.817302] hub 2-0:1.0: 3 ports detected
[ 2.820591] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.823782] Initializing USB Mass Storage driver...
[ 2.826879] usbcore: registered new interface driver usb-storage
[ 2.829875] USB Mass Storage support registered.
[ 2.833120] usbcore: registered new interface driver usbserial
[ 2.833595] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.835649] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.835655] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.835660] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.845259] usbcore: registered new interface driver usbserial_generic
[ 2.845750] ata1.00: ATA-9: OCZ-VERTEX3 MI, 2.06, max UDMA/133
[ 2.845754] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.854581] USB Serial support registered for generic
[ 2.855541] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.855546] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.855551] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.863920] usbserial: USB Serial Driver core
[ 2.865726] ata1.00: configured for UDMA/133
[ 2.865955] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 MI 2.06 PQ: 0 ANSI: 5
[ 2.866722] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.866895] sd 0:0:0:0: [sda] Write Protect is off
[ 2.866903] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.866999] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.868178] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[ 2.869848] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.891249] usbcore: registered new interface driver pl2303
[ 2.895038] USB Serial support registered for pl2303
[ 2.898979] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 2.905900] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.909744] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.913849] mousedev: PS/2 mouse device common for all mice
[ 2.918462] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 2.922818] md: linear personality registered for level -1
[ 2.926472] md: multipath personality registered for level -4
[ 2.930165] device-mapper: uevent: version 1.0.3
[ 2.934035] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 2.937935] device-mapper: multipath: version 1.5.0 loaded
[ 2.941632] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.945329] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 2.949163] device-mapper: multipath service-time: version 0.2.0 loaded
[ 2.952805] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.957419] cpuidle: using governor ladder
[ 2.961466] cpuidle: using governor menu
[ 2.965591] sdhci: Secure Digital Host Controller Interface driver
[ 2.969393] sdhci: Copyright(c) Pierre Ossman
[ 2.973149] EFI Variables Facility v0.08 2004-May-17
[ 2.977883] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 2.981654] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.985425] thinkpad_acpi: ThinkPad BIOS 8DET47WW (1.17 ), EC unknown
[ 2.989309] thinkpad_acpi: Lenovo ThinkPad X220, model 4286CTO
[ 2.995527] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.999702] thinkpad_acpi: radio switch found; radios are enabled
[ 3.003783] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 3.007708] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.011704] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.019357] Registered led device: tpacpi::thinklight
[ 3.019633] Registered led device: tpacpi::power
[ 3.019846] Registered led device: tpacpi::standby
[ 3.020027] Registered led device: tpacpi::thinkvantage
[ 3.020062] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 3.024653] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 3.031357] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 3.037663] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 3.092314] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.211658] hub 1-1:1.0: USB hub found
[ 3.215813] hub 1-1:1.0: 6 ports detected
[ 3.321966] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.441398] hub 2-1:1.0: USB hub found
[ 3.445639] hub 2-1:1.0: 8 ports detected
[ 3.523852] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[ 3.553728] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 3.558493] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 3.562987] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 3.570206] TCP: cubic registered
[ 3.574138] Initializing XFRM netlink socket
[ 3.578042] NET: Registered protocol family 17
[ 3.581905] NET: Registered protocol family 15
[ 3.585701] Key type dns_resolver registered
[ 3.591276] PM: Hibernation image not present or could not be loaded.
[ 3.591308] registered taskstats version 1
[ 3.600719] ALSA device list:
[ 3.601676] #0: HDA Intel PCH at 0xf1620000 irq 43
[ 3.602623] #29: ThinkPad Console Audio Control at EC reg 0x30, fw unknown
[ 3.687628] usb 1-1.6: new high-speed USB device number 4 using ehci_hcd
[ 3.928501] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00, board id: 1611, fw id: 774180
[ 3.929562] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.979707] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 3.989008] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[ 3.992230] EXT4-fs warning (device sda9): ext4_clear_journal_err:4419: Filesystem error recorded from previous mount: IO failure
[ 3.993274] EXT4-fs warning (device sda9): ext4_clear_journal_err:4420: Marking fs in need of filesystem check.
[ 3.995226] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 3.996259] VFS: Mounted root (ext4 filesystem) readonly on device 8:9.
[ 3.998136] devtmpfs: mounted
[ 3.999323] Freeing unused kernel memory: 532k freed
[ 4.201498] udevd[1048]: starting version 182
[ 4.237356] cfg80211: Calling CRDA to update world regulatory domain
[ 4.239700] xhci_hcd 0000:0e:00.0: xHCI Host Controller
[ 4.239706] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 3
[ 4.239875] xhci_hcd 0000:0e:00.0: irq 18, io mem 0xf0c00000
[ 4.239932] xhci_hcd 0000:0e:00.0: irq 44 for MSI/MSI-X
[ 4.239936] xhci_hcd 0000:0e:00.0: irq 45 for MSI/MSI-X
[ 4.239940] xhci_hcd 0000:0e:00.0: irq 46 for MSI/MSI-X
[ 4.239943] xhci_hcd 0000:0e:00.0: irq 47 for MSI/MSI-X
[ 4.239947] xhci_hcd 0000:0e:00.0: irq 48 for MSI/MSI-X
[ 4.240143] xHCI xhci_add_endpoint called for root hub
[ 4.240144] xHCI xhci_check_bandwidth called for root hub
[ 4.240176] hub 3-0:1.0: USB hub found
[ 4.240184] hub 3-0:1.0: 2 ports detected
[ 4.240335] xhci_hcd 0000:0e:00.0: xHCI Host Controller
[ 4.240339] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 4
[ 4.242929] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 4.242932] Copyright(c) 2003-2012 Intel Corporation
[ 4.243060] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 4.243063] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900040b8000
[ 4.243065] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 4.243183] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
[ 4.243688] xHCI xhci_add_endpoint called for root hub
[ 4.243691] xHCI xhci_check_bandwidth called for root hub
[ 4.243728] hub 4-0:1.0: USB hub found
[ 4.243744] hub 4-0:1.0: 2 ports detected
[ 4.250847] WARNING! power/level is deprecated; use power/control instead
[ 4.303121] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[ 4.402821] cfg80211: World regulatory domain updated:
[ 4.402824] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.402826] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.402828] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.402830] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.402832] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.402833] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.403012] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 4.403014] iwldvm: Copyright(c) 2003-2012 Intel Corporation
[ 4.403039] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 4.403040] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 4.403042] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 4.403043] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[ 4.403044] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[ 4.403046] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 4.403110] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 4.413257] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
[ 4.413259] iwlwifi 0000:03:00.0: Device SKU: 0x1F0
[ 4.413261] iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[ 4.413307] Registered led device: phy0-led
[ 4.416706] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 5.950148] EXT4-fs (sda9): re-mounted. Opts: (null)
[ 5.987710] Adding 1953260k swap on /dev/sda6. Priority:-1 extents:1 across:1953260k SS
[ 6.003299] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 6.005041] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 6.616736] NET: Registered protocol family 10
[ 6.653769] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.653910] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.937697] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.937850] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 7.056034] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.677455] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 9.924955] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10
[ 12.261683] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 12.362488] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 12.362803] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.632006] ata1.00: configured for UDMA/133
[ 13.632018] ata1: EH complete
[ 13.642423] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 13.665236] EXT4-fs (sda9): re-mounted. Opts: commit=600
[ 13.669398] EXT4-fs (sda7): re-mounted. Opts: commit=600
[ 13.670807] EXT4-fs (sda8): re-mounted. Opts: commit=600
[ 17.680135] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 17.680287] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 17.800380] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.066986] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 18.167891] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 18.168181] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.201952] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 18.202103] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 18.324321] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.007015] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 23.364231] wlan0: authenticate with f4:7f:35:98:97:05
[ 23.366424] wlan0: send auth to f4:7f:35:98:97:05 (try 1/3)
[ 23.367821] wlan0: authenticated
[ 23.367835] iwlwifi 0000:03:00.0: wlan0: disabling HT due to WEP/TKIP use
[ 23.367841] wlan0: waiting for beacon from f4:7f:35:98:97:05
[ 23.434878] wlan0: associate with f4:7f:35:98:97:05 (try 1/3)
[ 23.438805] wlan0: RX AssocResp from f4:7f:35:98:97:05 (capab=0x431 status=0 aid=20)
[ 23.440231] wlan0: associated
[ 23.440290] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 23.440381] cfg80211: Calling CRDA for country: CH
[ 23.454341] cfg80211: Regulatory domain changed to country: CH
[ 23.454348] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 23.454354] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 23.454360] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 23.454364] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 23.454368] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
\
 
 \ /
  Last update: 2012-08-27 19:21    [W:0.093 / U:1.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site