lkml.org 
[lkml]   [2012]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT
Sorry, this patch appears to contain whitespace errors which I missed.

Please wait for v2.

On Fri, Aug 24, 2012 at 01:00:12PM +0100, Lee Jones wrote:
> The SMSC911x Ethernet chip requires a fixed-regulator in order to
> function correctly. We have previously provided a means to obtain
> this during a Device Tree boot, however nothing has been put into
> place when booting with a non-DT kernel. This patch aims to change
> that.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
> arch/arm/mach-ux500/board-mop500-regulators.c | 17 +++++++++++++++++
> arch/arm/mach-ux500/board-mop500-regulators.h | 1 +
> arch/arm/mach-ux500/board-mop500.c | 21 +++++++++++++++++++++
> arch/arm/mach-ux500/board-mop500.h | 2 +-
> 4 files changed, 40 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
> index 52426a4..11ddda7 100644
> --- a/arch/arm/mach-ux500/board-mop500-regulators.c
> +++ b/arch/arm/mach-ux500/board-mop500-regulators.c
> @@ -13,6 +13,23 @@
> #include <linux/regulator/ab8500.h>
> #include "board-mop500-regulators.h"
>
> +#ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
> +static struct regulator_consumer_supply gpio_en_3v3_consumers[] = {
> + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
> +};
> +
> +struct regulator_init_data gpio_en_3v3_regulator = {
> + .constraints = {
> + .name = "EN-3V3",
> + .min_uV = 3300000,
> + .max_uV = 3300000,
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers),
> + .consumer_supplies = gpio_en_3v3_consumers,
> +};
> +#endif
> +
> /*
> * TPS61052 regulator
> */
> diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
> index 9499215..78a0642 100644
> --- a/arch/arm/mach-ux500/board-mop500-regulators.h
> +++ b/arch/arm/mach-ux500/board-mop500-regulators.h
> @@ -18,5 +18,6 @@ extern struct ab8500_regulator_reg_init
> ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS];
> extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS];
> extern struct regulator_init_data tps61052_regulator;
> +extern struct regulator_init_data gpio_en_3v3_regulator;
>
> #endif
> diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
> index de10f8f..0e904c8 100644
> --- a/arch/arm/mach-ux500/board-mop500.c
> +++ b/arch/arm/mach-ux500/board-mop500.c
> @@ -23,6 +23,7 @@
> #include <linux/spi/spi.h>
> #include <linux/mfd/abx500/ab8500.h>
> #include <linux/regulator/ab8500.h>
> +#include <linux/regulator/fixed.h>
> #include <linux/mfd/tc3589x.h>
> #include <linux/mfd/tps6105x.h>
> #include <linux/mfd/abx500/ab8500-gpio.h>
> @@ -75,6 +76,25 @@ static struct platform_device snowball_led_dev = {
> },
> };
>
> +#ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
> +static struct fixed_voltage_config snowball_gpio_en_3v3_data = {
> + .supply_name = "EN-3V3",
> + .gpio = SNOWBALL_EN_3V3_ETH_GPIO,
> + .microvolts = 3300000,
> + .enable_high = 1,
> + .init_data = &gpio_en_3v3_regulator,
> + .startup_delay = 5000, /* 1200us */
> +};
> +
> +static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
> + .name = "reg-fixed-voltage",
> + .id = 1,
> + .dev = {
> + .platform_data = &snowball_gpio_en_3v3_data,
> + },
> +};
> +#endif
> +
> static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
> .gpio_base = MOP500_AB8500_PIN_GPIO(1),
> .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE,
> @@ -585,6 +605,7 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
> &snowball_led_dev,
> &snowball_key_dev,
> &snowball_sbnet_dev,
> + &snowball_gpio_en_3v3_regulator_dev,
> };
>
> static void __init mop500_init_machine(void)
> diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
> index a0f920d..4ace165 100644
> --- a/arch/arm/mach-ux500/board-mop500.h
> +++ b/arch/arm/mach-ux500/board-mop500.h
> @@ -13,6 +13,7 @@
> #include <linux/amba/mmci.h>
>
> /* Snowball specific GPIO assignments, this board has no GPIO expander */
> +#define SNOWBALL_EN_3V3_ETH_GPIO 26
> #define SNOWBALL_ACCEL_INT1_GPIO 163
> #define SNOWBALL_ACCEL_INT2_GPIO 164
> #define SNOWBALL_MAGNET_DRDY_GPIO 165
> @@ -76,7 +77,6 @@
> #define SNOWBALL_PM_GPIO4_GPIO MOP500_AB8500_PIN_GPIO(4) /* SYSCLKREQ6/GPIO4 */
> #define SNOWBALL_EN_3V6_GPIO MOP500_AB8500_PIN_GPIO(16) /* PWMOUT3/GPIO16 */
> #define SNOWBALL_PME_ETH_GPIO MOP500_AB8500_PIN_GPIO(24) /* SYSCLKREQ7/GPIO24 */
> -#define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */
>
> struct device;
> struct i2c_board_info;
> --
> 1.7.9.5
>

--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-08-24 15:41    [W:0.073 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site