lkml.org 
[lkml]   [2012]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
Subject[next-20120823] NOHZ: local_softirq_pending 200 on s/r
From
Hi,

this week I was seeing the below NOHZ messages in my logs especially
when suspending and resuming.

Currently, I am using linux-next (next-20120823) on Ubuntu/precise
AMD64 with a Intel S(a)N(dy)B(ridge)-CPU.

$ dmesg | grep -A1 -B1 -i nohz
[ 720.331819] Disabling non-boot CPUs ...
[ 720.332035] NOHZ: local_softirq_pending 200
[ 720.434312] smpboot: CPU 1 is now offline
[ 720.434825] NOHZ: local_softirq_pending 200
[ 720.538237] smpboot: CPU 2 is now offline
[ 720.538676] NOHZ: local_softirq_pending 200
[ 720.642162] smpboot: CPU 3 is now offline

If I manually disable the cpuX... First I did not see NOHZ messages
but then there were some lines seen especially when cpuX went offline
(here: cpu1)

# echo 0 >/sys/devices/system/cpu/cpu1/online

[ dmeg ]
[ 2605.515771] smpboot: CPU 1 is now offline

The same with cpu2 and cpu3.

Jack Winter confirmed to see similiar NOHZ messages also on
v3.4.9-rt17 kernel (CPU: Core2Duo when no suspend performed):

[15223.171585] NOHZ: local_softirq_pending 08

So, the issue is seen on linux-next and -rt kernels.

According to Thomas "softirq 0x200 is the RCU one" and he requested me
to address the issue to Paul on #linux-rt.

Regards,
- Sedat -
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.0-rc3-next20120823-1-iniza-generic (sedat.dilek@gmail.com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Thu Aug 23 09:17:30 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-rc3-next20120823-1-iniza-generic root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro init=/lib/systemd/systemd
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 09XK 08/03/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask FE0000000 write-back
[ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable
[ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaffffff]
[ 0.000000] [mem 0x00000000-0xdaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdaffffff @ [mem 0x1f923000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fdfffff]
[ 0.000000] [mem 0x100000000-0x11fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x11fdfffff @ [mem 0xd9c99000-0xd9c9efff]
[ 0.000000] RAMDISK: [mem 0x364a8000-0x3724bfff]
[ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[ 0.000000] ACPI: XSDT 00000000daffe120 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000dafef000 000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000daff2000 082E8 (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf47000 00040
[ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000dafed000 00098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
[ 0.000000] NODE_DATA [mem 0x11fdfc000-0x11fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b400000-ffff88011f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xd9c9efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x11fdfffff]
[ 0.000000] On node 0 totalpages: 1021485
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 870624 pages, LIFO batch:31
[ 0.000000] Normal zone: 2040 pages used for memmap
[ 0.000000] Normal zone: 128520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[ 0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fa00000 s84864 r8192 d21632 u262144
[ 0.000000] pcpu-alloc: s84864 r8192 d21632 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003055
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-rc3-next20120823-1-iniza-generic root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro init=/lib/systemd/systemd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3923684k/4716544k available (6406k kernel code, 630604k absent, 162256k reserved, 6745k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1596.473 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.94 BogoMIPS (lpj=6385892)
[ 0.000009] pid_max: default: 32768 minimum: 301
[ 0.000032] Security Framework initialized
[ 0.000046] AppArmor: AppArmor initialized
[ 0.000380] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001424] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001872] Mount-cache hash table entries: 256
[ 0.002073] Initializing cgroup subsys cpuacct
[ 0.002078] Initializing cgroup subsys devices
[ 0.002081] Initializing cgroup subsys freezer
[ 0.002084] Initializing cgroup subsys blkio
[ 0.002087] Initializing cgroup subsys perf_event
[ 0.002112] Disabled fast string operations
[ 0.002115] CPU: Physical Processor ID: 0
[ 0.002117] CPU: Processor Core ID: 0
[ 0.002123] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002123] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002130] mce: CPU supports 7 MCE banks
[ 0.002144] CPU0: Thermal monitoring enabled (TM1)
[ 0.002152] process: using mwait in idle threads
[ 0.002157] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.002157] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002157] tlb_flushall_shift: 5
[ 0.004253] ACPI: Core revision 20120711
[ 0.011301] ftrace: allocating 24595 entries in 97 pages
[ 0.024991] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064655] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz stepping 07
[ 0.172241] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.172251] ... version: 3
[ 0.172253] ... bit width: 48
[ 0.172255] ... generic registers: 4
[ 0.172257] ... value mask: 0000ffffffffffff
[ 0.172260] ... max period: 000000007fffffff
[ 0.172262] ... fixed-purpose events: 3
[ 0.172264] ... event mask: 000000070000000f
[ 0.183569] Disabled fast string operations
[ 0.185788] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.196910] Disabled fast string operations
[ 0.210161] Disabled fast string operations
[ 0.172536] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.212285] Brought up 4 CPUs
[ 0.212293] smpboot: Total of 4 processors activated (12771.78 BogoMIPS)
[ 0.216077] devtmpfs: initialized
[ 0.216998] EVM: security.selinux
[ 0.217001] EVM: security.SMACK64
[ 0.217003] EVM: security.capability
[ 0.217044] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[ 0.217842] regulator-dummy: no parameters
[ 0.217876] RTC time: 9:35:49, date: 08/23/12
[ 0.217914] NET: Registered protocol family 16
[ 0.218062] ACPI: bus type pci registered
[ 0.218131] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.218137] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.225595] PCI: Using configuration type 1 for base access
[ 0.226438] bio: create slab <bio-0> at 0
[ 0.226517] ACPI: Added _OSI(Module Device)
[ 0.226520] ACPI: Added _OSI(Processor Device)
[ 0.226523] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.226525] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.228037] ACPI: EC: Look up EC in DSDT
[ 0.240262] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.242836] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.244110] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.244507] ACPI: Dynamic OEM Table Load:
[ 0.244511] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.244792] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.245215] ACPI: Dynamic OEM Table Load:
[ 0.245219] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.245350] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.245737] ACPI: Dynamic OEM Table Load:
[ 0.245740] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.247500] ACPI: Interpreter enabled
[ 0.247506] ACPI: (supports S0 S1 S3 S5)
[ 0.247527] ACPI: Using IOAPIC for interrupt routing
[ 0.252456] ACPI: Power Resource [FN00] (off)
[ 0.252531] ACPI: Power Resource [FN01] (off)
[ 0.252602] ACPI: Power Resource [FN02] (off)
[ 0.252673] ACPI: Power Resource [FN03] (off)
[ 0.252745] ACPI: Power Resource [FN04] (off)
[ 0.253043] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.253214] ACPI: No dock devices found.
[ 0.253219] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.253608] \_SB_.PCI0:_OSC invalid UUID
[ 0.253609] _OSC request data:1 8 1f
[ 0.253614] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.254038] PCI host bridge to bus 0000:00
[ 0.254043] pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff]
[ 0.254045] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.254049] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.254052] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.254055] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.254059] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.254062] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.254073] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.254114] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.254125] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.254132] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.254137] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
[ 0.254199] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.254223] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[ 0.254306] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.254346] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.254368] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[ 0.254466] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.254496] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.254512] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[ 0.254587] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.254613] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.254699] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.254731] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.254817] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.254850] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.254980] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.255024] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.255047] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[ 0.255145] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.255173] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.255307] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.255327] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f]
[ 0.255336] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097]
[ 0.255344] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087]
[ 0.255353] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093]
[ 0.255362] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
[ 0.255371] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[ 0.255421] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.255442] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.255458] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[ 0.255481] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.255560] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-3e]
[ 0.255723] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[ 0.255878] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[ 0.256622] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.264328] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.264337] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.264390] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-3e]
[ 0.264474] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.264536] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.264653] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[ 0.264728] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[ 0.265069] pci 0000:02:00.0: supports D1 D2
[ 0.265071] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.272240] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.272253] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.272279] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.272349] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e]
[ 0.272410] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.272445] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[ 0.272644] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.280226] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.280244] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.280284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.280390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.280425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.280455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.280587] \_SB_.PCI0:_OSC invalid UUID
[ 0.280589] _OSC request data:1 1f 1f
[ 0.280592] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.280597] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.283300] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.283351] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.283400] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.283447] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.283493] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.283540] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.283587] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.283634] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[ 0.283724] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.283733] vgaarb: loaded
[ 0.283735] vgaarb: bridge control possible 0000:00:02.0
[ 0.283869] SCSI subsystem initialized
[ 0.283873] ACPI: bus type scsi registered
[ 0.283916] libata version 3.00 loaded.
[ 0.283934] ACPI: bus type usb registered
[ 0.283950] usbcore: registered new interface driver usbfs
[ 0.283960] usbcore: registered new interface driver hub
[ 0.283981] usbcore: registered new device driver usb
[ 0.284047] PCI: Using ACPI for IRQ routing
[ 0.285721] PCI: pci_cache_line_size set to 64 bytes
[ 0.285841] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.285844] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[ 0.285846] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.285848] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[ 0.285927] NetLabel: Initializing
[ 0.285930] NetLabel: domain hash size = 128
[ 0.285932] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.285943] NetLabel: unlabeled traffic allowed by default
[ 0.285998] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.286007] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.288020] Switching to clocksource hpet
[ 0.293074] AppArmor: AppArmor Filesystem Enabled
[ 0.293103] pnp: PnP ACPI init
[ 0.293117] ACPI: bus type pnp registered
[ 0.293368] pnp 00:00: [bus 00-3e]
[ 0.293371] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.293373] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.293375] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.293377] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.293378] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.293380] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.293382] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.293383] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.293385] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.293386] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.293388] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.293389] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.293391] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.293393] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.293394] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.293396] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.293397] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.293399] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[ 0.293400] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.293468] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.293659] pnp 00:01: [io 0x0000-0x001f]
[ 0.293661] pnp 00:01: [io 0x0081-0x0091]
[ 0.293662] pnp 00:01: [io 0x0093-0x009f]
[ 0.293663] pnp 00:01: [io 0x00c0-0x00df]
[ 0.293665] pnp 00:01: [dma 4]
[ 0.293755] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.293763] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.293782] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.293854] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.293872] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.293881] pnp 00:04: [io 0x00f0]
[ 0.293891] pnp 00:04: [irq 13]
[ 0.293910] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.293920] pnp 00:05: [io 0x002e-0x002f]
[ 0.293922] pnp 00:05: [io 0x004e-0x004f]
[ 0.293923] pnp 00:05: [io 0x0061]
[ 0.293924] pnp 00:05: [io 0x0063]
[ 0.293926] pnp 00:05: [io 0x0065]
[ 0.293927] pnp 00:05: [io 0x0067]
[ 0.293928] pnp 00:05: [io 0x0070]
[ 0.293930] pnp 00:05: [io 0x0080]
[ 0.293931] pnp 00:05: [io 0x0092]
[ 0.293932] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.293934] pnp 00:05: [io 0x0680-0x069f]
[ 0.293937] pnp 00:05: [io 0x1000-0x100f]
[ 0.293938] pnp 00:05: [io 0x5000-0x5003]
[ 0.293940] pnp 00:05: [io 0xffff]
[ 0.293941] pnp 00:05: [io 0x0400-0x0453]
[ 0.293942] pnp 00:05: [io 0x0458-0x047f]
[ 0.293944] pnp 00:05: [io 0x0500-0x057f]
[ 0.293945] pnp 00:05: [io 0x0a00-0x0a0f]
[ 0.293946] pnp 00:05: [io 0x164e-0x164f]
[ 0.293948] pnp 00:05: [io 0x5000-0x500f]
[ 0.293985] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.293990] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.293993] system 00:05: [io 0x5000-0x5003] has been reserved
[ 0.293996] system 00:05: [io 0xffff] has been reserved
[ 0.294000] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.294003] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.294006] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.294009] system 00:05: [io 0x0a00-0x0a0f] has been reserved
[ 0.294013] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.294016] system 00:05: [io 0x5000-0x500f] could not be reserved
[ 0.294020] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294028] pnp 00:06: [io 0x0070-0x0077]
[ 0.294033] pnp 00:06: [irq 8]
[ 0.294052] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.294078] pnp 00:07: [io 0x0454-0x0457]
[ 0.294105] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.294110] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.294123] pnp 00:08: [io 0x0060]
[ 0.294124] pnp 00:08: [io 0x0064]
[ 0.294129] pnp 00:08: [irq 1]
[ 0.294149] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.294177] pnp 00:09: [irq 12]
[ 0.294198] pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[ 0.294322] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.294323] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.294325] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.294326] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.294328] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[ 0.294329] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.294331] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.294332] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.294334] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.294335] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.294337] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.294372] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.294377] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.294380] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.294384] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.294387] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.294391] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.294394] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.294398] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.294401] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.294405] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.294409] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294755] ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20120711/utresrc-650)
[ 0.294799] pnp 00:0b: can't evaluate _CRS: 12311
[ 0.294883] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.294907] pnp: PnP ACPI: found 12 devices
[ 0.294910] ACPI: ACPI bus type pnp unregistered
[ 0.301338] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.301348] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
[ 0.301360] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.301365] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.301376] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.301385] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.301392] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.301430] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.301432] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.301434] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.301436] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.301437] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.301439] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[ 0.301441] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.301443] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.301445] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.301473] NET: Registered protocol family 2
[ 0.302137] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.303971] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.304230] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.304264] TCP: reno registered
[ 0.304275] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.304296] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.304378] NET: Registered protocol family 1
[ 0.304394] pci 0000:00:02.0: Boot video device
[ 0.304571] PCI: CLS 64 bytes, default 64
[ 0.304613] Trying to unpack rootfs image as initramfs...
[ 0.587060] Freeing initrd memory: 13968k freed
[ 0.590245] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.590255] software IO TLB [mem 0xd5c99000-0xd9c98fff] (64MB) mapped at [ffff8800d5c99000-ffff8800d9c98fff]
[ 0.590691] audit: initializing netlink socket (disabled)
[ 0.590709] type=2000 audit(1345714549.476:1): initialized
[ 0.613304] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.614722] VFS: Disk quotas dquot_6.5.2
[ 0.614764] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.615084] fuse init (API version 7.20)
[ 0.615150] msgmni has been set to 7690
[ 0.615493] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.615522] io scheduler noop registered
[ 0.615526] io scheduler deadline registered (default)
[ 0.615549] io scheduler cfq registered
[ 0.615771] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.615808] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.615864] intel_idle: MWAIT substates: 0x21120
[ 0.615866] intel_idle: v0.4 model 0x2A
[ 0.615867] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.616462] ACPI: AC Adapter [ADP1] (on-line)
[ 0.616720] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.616882] ACPI: Lid Switch [LID0]
[ 0.616922] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.616931] ACPI: Power Button [PWRB]
[ 0.616965] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.616970] ACPI: Power Button [PWRF]
[ 0.617025] ACPI: Fan [FAN0] (off)
[ 0.617052] ACPI: Fan [FAN1] (off)
[ 0.617078] ACPI: Fan [FAN2] (off)
[ 0.617102] ACPI: Fan [FAN3] (off)
[ 0.617128] ACPI: Fan [FAN4] (off)
[ 0.617174] ACPI: Requesting acpi_cpufreq
[ 0.623188] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.623193] ACPI: Thermal Zone [TZ00] (71 C)
[ 0.623346] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.623350] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.623379] GHES: HEST is not enabled!
[ 0.623450] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.626649] Linux agpgart interface v0.103
[ 0.628313] brd: module loaded
[ 0.629136] ACPI: Battery Slot [BAT1] (battery present)
[ 0.629280] loop: module loaded
[ 0.629365] ahci 0000:00:1f.2: version 3.0
[ 0.629426] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 0.629463] ahci: SSS flag set, parallel bus scan disabled
[ 0.643824] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[ 0.643840] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.643855] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.668178] scsi0 : ahci
[ 0.668247] scsi1 : ahci
[ 0.668309] scsi2 : ahci
[ 0.668364] scsi3 : ahci
[ 0.668420] scsi4 : ahci
[ 0.668475] scsi5 : ahci
[ 0.668509] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 40
[ 0.668514] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 40
[ 0.668518] ata3: DUMMY
[ 0.668521] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 40
[ 0.668526] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 40
[ 0.668529] ata6: DUMMY
[ 0.668758] libphy: Fixed MDIO Bus: probed
[ 0.668792] tun: Universal TUN/TAP device driver, 1.6
[ 0.668795] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.668851] PPP generic driver version 2.4.2
[ 0.668900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.668937] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.668941] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.668949] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.672864] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.672875] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.672891] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf070a000
[ 0.683769] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.683827] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.683836] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.683849] usb usb1: Product: EHCI Host Controller
[ 0.683853] usb usb1: Manufacturer: Linux 3.6.0-rc3-next20120823-1-iniza-generic ehci_hcd
[ 0.683856] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.683986] hub 1-0:1.0: USB hub found
[ 0.683992] hub 1-0:1.0: 2 ports detected
[ 0.684056] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.684060] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.684065] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.687961] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.687971] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.687984] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0709000
[ 0.699764] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.699837] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.699843] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.699850] usb usb2: Product: EHCI Host Controller
[ 0.699854] usb usb2: Manufacturer: Linux 3.6.0-rc3-next20120823-1-iniza-generic ehci_hcd
[ 0.699859] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.699951] hub 2-0:1.0: USB hub found
[ 0.699956] hub 2-0:1.0: 2 ports detected
[ 0.700003] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.700019] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.700060] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.700066] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.709751] xhci_hcd 0000:03:00.0: irq 16, io mem 0xf0500000
[ 0.709819] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
[ 0.709825] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[ 0.709830] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 0.709835] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 0.709840] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 0.709944] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.709947] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.709951] usb usb3: Product: xHCI Host Controller
[ 0.709954] usb usb3: Manufacturer: Linux 3.6.0-rc3-next20120823-1-iniza-generic xhci_hcd
[ 0.709958] usb usb3: SerialNumber: 0000:03:00.0
[ 0.710026] xHCI xhci_add_endpoint called for root hub
[ 0.710028] xHCI xhci_check_bandwidth called for root hub
[ 0.710048] hub 3-0:1.0: USB hub found
[ 0.710056] hub 3-0:1.0: 2 ports detected
[ 0.710109] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.710114] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 0.710151] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.710155] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.710158] usb usb4: Product: xHCI Host Controller
[ 0.710161] usb usb4: Manufacturer: Linux 3.6.0-rc3-next20120823-1-iniza-generic xhci_hcd
[ 0.710165] usb usb4: SerialNumber: 0000:03:00.0
[ 0.710226] xHCI xhci_add_endpoint called for root hub
[ 0.710227] xHCI xhci_check_bandwidth called for root hub
[ 0.710244] hub 4-0:1.0: USB hub found
[ 0.710253] hub 4-0:1.0: 2 ports detected
[ 0.710373] usbcore: registered new interface driver libusual
[ 0.710406] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[ 0.718438] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.718444] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.718538] mousedev: PS/2 mouse device common for all mice
[ 0.719004] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.719035] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.719096] device-mapper: uevent: version 1.0.3
[ 0.719149] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 0.719220] cpuidle: using governor ladder
[ 0.719311] cpuidle: using governor menu
[ 0.719313] EFI Variables Facility v0.08 2004-May-17
[ 0.719472] ashmem: initialized
[ 0.719587] TCP: cubic registered
[ 0.719670] NET: Registered protocol family 10
[ 0.719848] NET: Registered protocol family 17
[ 0.719862] Key type dns_resolver registered
[ 0.720232] PM: Hibernation image not present or could not be loaded.
[ 0.720244] registered taskstats version 1
[ 0.722949] Key type trusted registered
[ 0.725431] Key type encrypted registered
[ 0.726806] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.727968] Magic number: 8:722:576
[ 0.728089] rtc_cmos 00:06: setting system clock to 2012-08-23 09:35:49 UTC (1345714549)
[ 0.728792] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.728797] EDD information not available.
[ 0.987643] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.988842] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[ 0.988861] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.990102] ata1.00: configured for UDMA/133
[ 0.990402] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[ 0.990574] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.990590] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.990597] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.990690] sd 0:0:0:0: [sda] Write Protect is off
[ 0.990698] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 10
[ 0.990808] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 0.995585] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.000812] sda: sda1 sda2 sda3
[ 1.001619] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.128029] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.128047] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.128498] hub 1-1:1.0: USB hub found
[ 1.128673] hub 1-1:1.0: 6 ports detected
[ 1.239465] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.307428] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.308024] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133
[ 1.308043] ata2.00: 31277232 sectors, multi 1: LBA48
[ 1.308703] ata2.00: configured for UDMA/133
[ 1.308922] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5
[ 1.309088] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 1.309094] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.309269] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.309274] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 10
[ 1.309402] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.310594] sdb: sdb1 sdb2
[ 1.311038] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.371860] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.371879] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.372337] hub 2-1:1.0: USB hub found
[ 1.372500] hub 2-1:1.0: 6 ports detected
[ 1.443461] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
[ 1.587210] tsc: Refined TSC clocksource calibration: 1596.373 MHz
[ 1.587231] Switching to clocksource tsc
[ 1.627187] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.695566] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018
[ 1.695585] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.695597] usb 1-1.4: Product: WebCam SC-13HDL11431N
[ 1.695605] usb 1-1.4: Manufacturer: 123
[ 1.939104] usb 2-1.4: new low-speed USB device number 3 using ehci_hcd
[ 1.946939] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.948566] Freeing unused kernel memory: 924k freed
[ 1.948716] Write protecting the kernel read-only data: 12288k
[ 1.953558] Freeing unused kernel memory: 1776k freed
[ 1.957207] Freeing unused kernel memory: 1236k freed
[ 1.973366] udevd[119]: starting version 175
[ 2.031313] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.031573] r8169 0000:02:00.0: irq 46 for MSI/MSI-X
[ 2.031846] r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000066a000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 46
[ 2.031857] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.036590] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c00e
[ 2.036600] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.036608] usb 2-1.4: Product: USB-PS/2 Optical Mouse
[ 2.036614] usb 2-1.4: Manufacturer: Logitech
[ 2.050679] usbcore: registered new interface driver usbhid
[ 2.050686] usbhid: USB HID core driver
[ 2.106927] usb 2-1.5: new full-speed USB device number 4 using ehci_hcd
[ 2.202864] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189
[ 2.202882] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.924954] EXT4-fs (loop0): INFO: recovery required on readonly filesystem
[ 2.924962] EXT4-fs (loop0): write access will be enabled during recovery
[ 3.740073] EXT4-fs (loop0): recovery complete
[ 3.762199] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.755383] tty_init_dev: 7 callbacks suppressed
[ 6.092793] udevd[294]: starting version 175
[ 6.468535] lp: driver loaded but no devices found
[ 6.946932] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[ 8.497804] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[ 8.497812] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.497814] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 8.497817] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[ 8.497820] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.497823] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[ 8.497826] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.497827] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.547082] cfg80211: Calling CRDA to update world regulatory domain
[ 8.569496] wmi: Mapper loaded
[ 8.605948] samsung_laptop: detected SABI interface: SwSmi@
[ 8.605951] samsung_laptop: Backlight controlled by ACPI video driver
[ 8.626367] mei 0000:00:16.0: setting latency timer to 64
[ 8.626428] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 8.631629] mei 0000:00:16.0: wd: failed to find the client
[ 8.676478] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 8.715192] Bluetooth: Core ver 2.16
[ 8.715210] NET: Registered protocol family 31
[ 8.715213] Bluetooth: HCI device and connection manager initialized
[ 8.715220] Bluetooth: HCI socket layer initialized
[ 8.715223] Bluetooth: L2CAP socket layer initialized
[ 8.715230] Bluetooth: SCO socket layer initialized
[ 8.980932] usbcore: registered new interface driver btusb
[ 9.365797] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 9.365800] Copyright(c) 2003-2012 Intel Corporation
[ 9.365905] iwlwifi 0000:01:00.0: pci_resource_len = 0x00002000
[ 9.365908] iwlwifi 0000:01:00.0: pci_resource_base = ffffc90004f94000
[ 9.365909] iwlwifi 0000:01:00.0: HW Revision ID = 0x34
[ 9.366053] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X
[ 9.532577] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 9.533906] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[ 9.535041] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[ 9.536231] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 9.706115] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input4
[ 9.706246] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.4/input0
[ 9.767366] [drm] Initialized drm 1.1.0 20060810
[ 9.928806] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[ 9.945385] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[ 10.010812] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1
[ 10.029500] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[ 10.078190] Linux video capture interface: v2.00
[ 10.504194] pci 0000:00:00.0: Intel Sandybridge Chipset
[ 10.504288] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 10.505396] pci 0000:00:00.0: detected 65536K stolen memory
[ 10.505448] i915 0000:00:02.0: setting latency timer to 64
[ 10.541608] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[ 10.541617] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 10.541618] [drm] Driver supports precise vblank timestamp query.
[ 10.541656] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.571759] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[ 10.591004] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[ 10.591074] usbcore: registered new interface driver uvcvideo
[ 10.591076] USB Video Class driver (1.1.1)
[ 10.694656] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 10.694660] iwldvm: Copyright(c) 2003-2012 Intel Corporation
[ 10.694689] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 10.694692] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 10.694694] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 10.694696] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[ 10.694698] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[ 10.694701] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[ 10.694829] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 10.710337] iwlwifi 0000:01:00.0: device EEPROM VER=0x716, CALIB=0x6
[ 10.710339] iwlwifi 0000:01:00.0: Device SKU: 0x1F0
[ 10.710341] iwlwifi 0000:01:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[ 10.710418] Registered led device: phy0-led
[ 10.710448] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 10.794920] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.035382] type=1400 audit(1345714559.807:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=411 comm="apparmor_parser"
[ 11.063709] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 11.063714] cfg80211: World regulatory domain updated:
[ 11.063715] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.063717] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.063719] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.063720] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.063721] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.063723] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.098641] type=1400 audit(1345714559.871:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=412 comm="apparmor_parser"
[ 11.099136] type=1400 audit(1345714559.871:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=412 comm="apparmor_parser"
[ 11.099410] type=1400 audit(1345714559.871:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=412 comm="apparmor_parser"
[ 11.168745] type=1400 audit(1345714559.943:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=559 comm="apparmor_parser"
[ 11.169253] type=1400 audit(1345714559.943:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=559 comm="apparmor_parser"
[ 11.174808] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 11.271254] type=1400 audit(1345714560.043:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=626 comm="apparmor_parser"
[ 11.271266] type=1400 audit(1345714560.043:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=622 comm="apparmor_parser"
[ 11.271893] type=1400 audit(1345714560.043:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=622 comm="apparmor_parser"
[ 11.368332] fbcon: inteldrmfb (fb0) is primary device
[ 11.526818] type=1400 audit(1345714560.303:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=449 comm="apparmor_parser"
[ 11.552183] Console: switching to colour frame buffer device 170x48
[ 11.554503] fb0: inteldrmfb frame buffer device
[ 11.554503] drm: registered panic notifier
[ 11.556921] acpi device:33: registered as cooling_device9
[ 11.557110] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.557165] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 11.557335] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 11.557463] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 12.154096] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 12.154183] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.154242] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.023157] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:0 extents:1 across:262140k
[ 13.023482] tty_init_dev: 25 callbacks suppressed
[ 16.770116] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 16.776766] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 17.071197] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 17.077895] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 17.186022] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.704826] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[ 23.774270] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 23.783148] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 23.784875] wlan0: authenticated
[ 23.785059] iwlwifi 0000:01:00.0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 23.785063] iwlwifi 0000:01:00.0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 23.787417] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 23.791368] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=2)
[ 23.796369] wlan0: associated
[ 23.799439] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 59.272446] usb 2-1.5: USB disconnect, device number 4
[ 64.840960] audit_printk_skb: 21 callbacks suppressed
[ 64.840964] type=1400 audit(1345707413.840:19): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/run/user/wearefam/dconf/user" pid=1697 comm="mission-control" requested_mask="rwc" denied_mask="rwc" fsuid=1000 ouid=1000
[ 576.305164] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3)
[ 576.314860] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 576.314869] cfg80211: Restoring regulatory settings
[ 576.314878] cfg80211: Calling CRDA to update world regulatory domain
[ 576.323769] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 576.323777] cfg80211: World regulatory domain updated:
[ 576.323780] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 576.323785] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 576.323789] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 576.323792] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 576.323795] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 576.323798] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 578.962323] PM: Syncing filesystems ... done.
[ 578.965740] PM: Preparing system for mem sleep
[ 579.269610] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 579.285966] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 579.301958] PM: Entering mem sleep
[ 579.302022] Suspending console(s) (use no_console_suspend to debug)
[ 579.302310] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 579.302411] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 579.302600] sd 0:0:0:0: [sda] Stopping disk
[ 579.305059] sd 1:0:0:0: [sdb] Stopping disk
[ 579.921534] PM: suspend of devices complete after 619.854 msecs
[ 579.921535] PM: suspend devices took 0.620 seconds
[ 579.921642] PM: late suspend of devices complete after 0.105 msecs
[ 579.937461] r8169 0000:02:00.0: wake-up capability enabled by ACPI
[ 580.017345] PM: noirq suspend of devices complete after 95.753 msecs
[ 580.017612] ACPI: Preparing to enter system sleep state S3
[ 580.041406] PM: Saving platform NVS memory
[ 580.046720] Disabling non-boot CPUs ...
[ 580.149170] smpboot: CPU 1 is now offline
[ 580.253087] smpboot: CPU 2 is now offline
[ 580.254653] smpboot: CPU 3 is now offline
[ 580.254912] Extended CMOS year: 2000
[ 580.256167] ACPI: Low-level resume complete
[ 580.256213] PM: Restoring platform NVS memory
[ 580.257428] Extended CMOS year: 2000
[ 580.257495] Enabling non-boot CPUs ...
[ 580.257569] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 580.268677] Disabled fast string operations
[ 580.271165] CPU1 is up
[ 580.271231] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 580.282268] Disabled fast string operations
[ 580.284759] CPU2 is up
[ 580.284829] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 580.295866] Disabled fast string operations
[ 580.298401] CPU3 is up
[ 580.303147] ACPI: Waking up from system sleep state S3
[ 580.491654] PM: noirq resume of devices complete after 144.079 msecs
[ 580.491757] PM: early resume of devices complete after 0.062 msecs
[ 580.491789] i915 0000:00:02.0: setting latency timer to 64
[ 580.491812] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 580.491860] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 580.491921] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 580.491927] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 580.491941] ahci 0000:00:1f.2: setting latency timer to 64
[ 580.491991] r8169 0000:02:00.0: wake-up capability disabled by ACPI
[ 580.492130] usb usb3: root hub lost power or was reset
[ 580.492132] usb usb4: root hub lost power or was reset
[ 580.492215] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[ 580.492903] mei 0000:00:16.0: wd: failed to find the client
[ 580.496879] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
[ 580.496887] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[ 580.496895] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 580.496902] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 580.496910] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 580.548359] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 580.827314] ata5: SATA link down (SStatus 0 SControl 300)
[ 580.843337] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 580.847601] ata2.00: configured for UDMA/133
[ 580.851288] ata4: SATA link down (SStatus 0 SControl 300)
[ 580.863379] sd 1:0:0:0: [sdb] Starting disk
[ 580.931406] usb 2-1.4: reset low-speed USB device number 3 using ehci_hcd
[ 581.283141] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
[ 582.905819] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 582.908243] ata1.00: configured for UDMA/133
[ 582.921941] sd 0:0:0:0: [sda] Starting disk
[ 582.924587] Extended CMOS year: 2000
[ 582.946054] PM: resume of devices complete after 2456.033 msecs
[ 582.946129] PM: resume devices took 2.456 seconds
[ 582.946161] PM: Finishing wakeup.
[ 582.946162] Restarting tasks ... done.
[ 582.951477] video LNXVIDEO:00: Restoring backlight state
[ 583.621589] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 583.628309] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 583.746575] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 584.013441] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[ 588.988570] tty_init_dev: 44 callbacks suppressed
[ 590.084193] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 590.090946] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 590.093219] wlan0: authenticated
[ 590.093569] iwlwifi 0000:01:00.0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 590.093580] iwlwifi 0000:01:00.0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 590.096669] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 590.100745] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=2)
[ 590.106009] wlan0: associated
[ 590.108685] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 717.242447] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3)
[ 717.255412] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 717.255424] cfg80211: Restoring regulatory settings
[ 717.255435] cfg80211: Calling CRDA to update world regulatory domain
[ 717.265166] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 717.265171] cfg80211: World regulatory domain updated:
[ 717.265173] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 717.265176] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 717.265178] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 717.265180] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 717.265182] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 717.265184] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 719.231963] PM: Syncing filesystems ... done.
[ 719.234729] PM: Preparing system for mem sleep
[ 719.570576] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 719.587041] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 719.603100] PM: Entering mem sleep
[ 719.603161] Suspending console(s) (use no_console_suspend to debug)
[ 719.603373] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 719.603394] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 719.603628] sd 0:0:0:0: [sda] Stopping disk
[ 719.606181] sd 1:0:0:0: [sdb] Stopping disk
[ 720.206692] PM: suspend of devices complete after 603.863 msecs
[ 720.206693] PM: suspend devices took 0.604 seconds
[ 720.206801] PM: late suspend of devices complete after 0.106 msecs
[ 720.222615] r8169 0000:02:00.0: wake-up capability enabled by ACPI
[ 720.302501] PM: noirq suspend of devices complete after 95.750 msecs
[ 720.302767] ACPI: Preparing to enter system sleep state S3
[ 720.326559] PM: Saving platform NVS memory
[ 720.331819] Disabling non-boot CPUs ...
[ 720.332035] NOHZ: local_softirq_pending 200
[ 720.434312] smpboot: CPU 1 is now offline
[ 720.434825] NOHZ: local_softirq_pending 200
[ 720.538237] smpboot: CPU 2 is now offline
[ 720.538676] NOHZ: local_softirq_pending 200
[ 720.642162] smpboot: CPU 3 is now offline
[ 720.642495] Extended CMOS year: 2000
[ 720.643735] ACPI: Low-level resume complete
[ 720.643781] PM: Restoring platform NVS memory
[ 720.644992] Extended CMOS year: 2000
[ 720.645056] Enabling non-boot CPUs ...
[ 720.645129] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 720.656139] Disabled fast string operations
[ 720.658634] CPU1 is up
[ 720.658702] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 720.669738] Disabled fast string operations
[ 720.672248] CPU2 is up
[ 720.672305] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 720.683340] Disabled fast string operations
[ 720.685870] CPU3 is up
[ 720.690630] ACPI: Waking up from system sleep state S3
[ 720.880717] PM: noirq resume of devices complete after 144.081 msecs
[ 720.880819] PM: early resume of devices complete after 0.062 msecs
[ 720.880855] i915 0000:00:02.0: setting latency timer to 64
[ 720.880874] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 720.880921] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 720.880981] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 720.880987] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 720.881039] ahci 0000:00:1f.2: setting latency timer to 64
[ 720.881082] r8169 0000:02:00.0: wake-up capability disabled by ACPI
[ 720.881162] usb usb3: root hub lost power or was reset
[ 720.881164] usb usb4: root hub lost power or was reset
[ 720.881255] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[ 720.881832] mei 0000:00:16.0: wd: failed to find the client
[ 720.885880] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
[ 720.885889] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[ 720.885897] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 720.885904] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 720.885911] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 720.937380] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 721.136479] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
[ 721.216337] ata4: SATA link down (SStatus 0 SControl 300)
[ 721.224351] ata5: SATA link down (SStatus 0 SControl 300)
[ 721.240334] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 721.244565] ata2.00: configured for UDMA/133
[ 721.260433] sd 1:0:0:0: [sdb] Starting disk
[ 721.488312] usb 2-1.4: reset low-speed USB device number 3 using ehci_hcd
[ 723.302877] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 723.305335] ata1.00: configured for UDMA/133
[ 723.318988] sd 0:0:0:0: [sda] Starting disk
[ 723.339911] PM: resume of devices complete after 2460.831 msecs
[ 723.339985] PM: resume devices took 2.460 seconds
[ 723.340071] PM: Finishing wakeup.
[ 723.340072] Restarting tasks ... done.
[ 723.350772] video LNXVIDEO:00: Restoring backlight state
[ 724.009733] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 724.016483] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 724.129434] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 724.356884] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[ 730.427808] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 730.435401] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 730.437168] wlan0: authenticated
[ 730.437493] iwlwifi 0000:01:00.0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 730.437506] iwlwifi 0000:01:00.0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 730.437767] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 730.442132] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=2)
[ 730.448663] wlan0: associated
[ 730.449751] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2525.032145] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3)
[ 2525.102251] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2525.102256] cfg80211: Restoring regulatory settings
[ 2525.102261] cfg80211: Calling CRDA to update world regulatory domain
[ 2525.107250] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2525.107254] cfg80211: World regulatory domain updated:
[ 2525.107256] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2525.107259] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2525.107261] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2525.107263] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2525.107265] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2525.107267] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2527.934745] PM: Syncing filesystems ... done.
[ 2527.937736] PM: Preparing system for mem sleep
[ 2528.174982] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2528.188056] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 2528.204041] PM: Entering mem sleep
[ 2528.204105] Suspending console(s) (use no_console_suspend to debug)
[ 2528.204320] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 2528.204510] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2528.204650] sd 0:0:0:0: [sda] Stopping disk
[ 2528.207240] sd 1:0:0:0: [sdb] Stopping disk
[ 2528.807569] PM: suspend of devices complete after 603.794 msecs
[ 2528.807571] PM: suspend devices took 0.604 seconds
[ 2528.807665] PM: late suspend of devices complete after 0.092 msecs
[ 2528.823541] r8169 0000:02:00.0: wake-up capability enabled by ACPI
[ 2528.903412] PM: noirq suspend of devices complete after 95.811 msecs
[ 2528.903692] ACPI: Preparing to enter system sleep state S3
[ 2528.927486] PM: Saving platform NVS memory
[ 2528.932863] Disabling non-boot CPUs ...
[ 2529.035242] smpboot: CPU 1 is now offline
[ 2529.035738] NOHZ: local_softirq_pending 200
[ 2529.139165] smpboot: CPU 2 is now offline
[ 2529.139596] NOHZ: local_softirq_pending 200
[ 2529.243088] smpboot: CPU 3 is now offline
[ 2529.243411] Extended CMOS year: 2000
[ 2529.244648] ACPI: Low-level resume complete
[ 2529.244695] PM: Restoring platform NVS memory
[ 2529.245899] Extended CMOS year: 2000
[ 2529.245964] Enabling non-boot CPUs ...
[ 2529.246036] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2529.257033] Disabled fast string operations
[ 2529.259530] CPU1 is up
[ 2529.259609] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 2529.270646] Disabled fast string operations
[ 2529.273173] CPU2 is up
[ 2529.273231] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2529.284265] Disabled fast string operations
[ 2529.286775] CPU3 is up
[ 2529.291541] ACPI: Waking up from system sleep state S3
[ 2529.481633] PM: noirq resume of devices complete after 144.063 msecs
[ 2529.481760] PM: early resume of devices complete after 0.062 msecs
[ 2529.481794] i915 0000:00:02.0: setting latency timer to 64
[ 2529.481843] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 2529.481928] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2529.481951] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2529.481959] ahci 0000:00:1f.2: setting latency timer to 64
[ 2529.482038] r8169 0000:02:00.0: wake-up capability disabled by ACPI
[ 2529.482168] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio.
[ 2529.482294] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 2529.482527] usb usb3: root hub lost power or was reset
[ 2529.482529] usb usb4: root hub lost power or was reset
[ 2529.487389] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
[ 2529.487416] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[ 2529.487423] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 2529.487448] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 2529.487455] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2529.487755] mei 0000:00:16.0: wd: failed to find the client
[ 2529.537752] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2529.733498] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
[ 2529.817287] ata4: SATA link down (SStatus 0 SControl 300)
[ 2529.825265] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2529.829357] ata2.00: configured for UDMA/133
[ 2529.841289] ata5: SATA link down (SStatus 0 SControl 300)
[ 2529.845365] sd 1:0:0:0: [sdb] Starting disk
[ 2530.085260] usb 2-1.4: reset low-speed USB device number 3 using ehci_hcd
[ 2531.903790] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2531.906204] ata1.00: configured for UDMA/133
[ 2531.919866] sd 0:0:0:0: [sda] Starting disk
[ 2531.942418] PM: resume of devices complete after 2462.399 msecs
[ 2531.942495] PM: resume devices took 2.460 seconds
[ 2531.942568] PM: Finishing wakeup.
[ 2531.942569] Restarting tasks ... done.
[ 2531.948095] video LNXVIDEO:00: Restoring backlight state
[ 2532.572485] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 2532.579155] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 2532.692663] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2532.898297] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[ 2538.968892] wlan0: authenticate with 00:04:0e:e4:00:3d
[ 2538.978074] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3)
[ 2538.979854] wlan0: authenticated
[ 2538.980197] iwlwifi 0000:01:00.0: wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 2538.980210] iwlwifi 0000:01:00.0: wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 2538.982725] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3)
[ 2538.987004] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=2)
[ 2538.993072] wlan0: associated
[ 2538.994735] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2605.515771] smpboot: CPU 1 is now offline
[ 2628.310971] smpboot: CPU 2 is now offline
[ 2636.117903] smpboot: CPU 3 is now offline
[ 2636.117912] SMP alternatives: switching to UP code
[ 2794.677734] SMP alternatives: switching to SMP code
[ 2794.692349] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2794.703285] Disabled fast string operations
[ 2794.708860] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 2794.719817] Disabled fast string operations
[ 2794.724198] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2794.735438] Disabled fast string operations
[ 2916.926545] NOHZ: local_softirq_pending 200
[ 2916.927966] smpboot: CPU 1 is now offline
[ 2916.932275] smpboot: CPU 2 is now offline
[ 2916.935883] smpboot: CPU 3 is now offline
[ 2916.935887] SMP alternatives: switching to UP code
[ 2945.572258] SMP alternatives: switching to SMP code
[ 2945.586981] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2945.597916] Disabled fast string operations
[ 2945.607556] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 2945.618603] Disabled fast string operations
[ 2945.627019] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2945.638089] Disabled fast string operations
[ 2953.672022] NOHZ: local_softirq_pending 200
[ 2953.674573] smpboot: CPU 1 is now offline
[ 2953.784778] smpboot: CPU 2 is now offline
[ 2953.789967] smpboot: CPU 3 is now offline
[ 2953.789976] SMP alternatives: switching to UP code
[ 2957.395671] SMP alternatives: switching to SMP code
[ 2957.411015] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2957.421952] Disabled fast string operations
[ 2957.428310] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 2957.439364] Disabled fast string operations
[ 2957.444597] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2957.455842] Disabled fast string operations
[ 2979.195409] smpboot: CPU 1 is now offline
[ 2979.204029] smpboot: CPU 2 is now offline
[ 2979.310776] smpboot: CPU 3 is now offline
[ 2979.310784] SMP alternatives: switching to UP code
[ 2993.721444] SMP alternatives: switching to SMP code
[ 2993.736053] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2993.746990] Disabled fast string operations
[ 2993.756213] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 2993.767189] Disabled fast string operations
[ 2993.775715] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2993.786687] Disabled fast string operations
[ 4419.833986] smpboot: CPU 1 is now offline
[ 4419.843694] smpboot: CPU 2 is now offline
[ 4419.850381] smpboot: CPU 3 is now offline
[ 4419.850388] SMP alternatives: switching to UP code
[ 4430.889367] SMP alternatives: switching to SMP code
[ 4430.906136] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4430.917071] Disabled fast string operations
[ 4430.923801] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4430.934948] Disabled fast string operations
[ 4430.941303] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4430.952249] Disabled fast string operations
[ 4438.006049] NOHZ: local_softirq_pending 200
[ 4438.006065] NOHZ: local_softirq_pending 200
[ 4438.007454] smpboot: CPU 1 is now offline
[ 4438.117068] smpboot: CPU 2 is now offline
[ 4438.225019] smpboot: CPU 3 is now offline
[ 4438.225028] SMP alternatives: switching to UP code
[ 4462.601107] SMP alternatives: switching to SMP code
[ 4462.616031] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4462.626966] Disabled fast string operations
[ 4462.637212] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4462.648161] Disabled fast string operations
[ 4462.654340] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4462.665324] Disabled fast string operations
[ 4468.382519] NOHZ: local_softirq_pending 200
[ 4468.384620] smpboot: CPU 1 is now offline
[ 4468.391363] smpboot: CPU 2 is now offline
[ 4468.499530] smpboot: CPU 3 is now offline
[ 4468.499539] SMP alternatives: switching to UP code
[ 4480.694295] SMP alternatives: switching to SMP code
[ 4480.709598] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4480.720533] Disabled fast string operations
[ 4480.728217] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4480.739168] Disabled fast string operations
[ 4480.744653] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4480.755591] Disabled fast string operations
[ 4488.133592] smpboot: CPU 1 is now offline
[ 4488.142391] smpboot: CPU 2 is now offline
[ 4488.249533] smpboot: CPU 3 is now offline
[ 4488.249541] SMP alternatives: switching to UP code
[ 4493.445079] SMP alternatives: switching to SMP code
[ 4493.471037] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4493.481974] Disabled fast string operations
[ 4493.489610] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4493.500928] Disabled fast string operations
[ 4493.506881] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4493.517847] Disabled fast string operations
[ 4500.346245] smpboot: CPU 1 is now offline
[ 4500.354110] smpboot: CPU 2 is now offline
[ 4500.460877] smpboot: CPU 3 is now offline
[ 4500.460887] SMP alternatives: switching to UP code
[ 4506.823854] SMP alternatives: switching to SMP code
[ 4506.839213] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4506.850148] Disabled fast string operations
[ 4506.856684] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4506.867632] Disabled fast string operations
[ 4506.876948] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4506.887894] Disabled fast string operations
[ 4517.936519] smpboot: CPU 1 is now offline
[ 4517.945741] smpboot: CPU 2 is now offline
[ 4517.953639] smpboot: CPU 3 is now offline
[ 4517.953647] SMP alternatives: switching to UP code
[ 4523.076411] SMP alternatives: switching to SMP code
[ 4523.092126] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4523.103061] Disabled fast string operations
[ 4523.111107] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4523.122059] Disabled fast string operations
[ 4523.130599] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4523.142007] Disabled fast string operations
[ 4541.353632] smpboot: CPU 1 is now offline
[ 4541.365415] smpboot: CPU 2 is now offline
[ 4541.372098] smpboot: CPU 3 is now offline
[ 4541.372106] SMP alternatives: switching to UP code
[ 4543.682409] SMP alternatives: switching to SMP code
[ 4543.697405] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4543.708363] Disabled fast string operations
[ 4543.716099] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4543.727069] Disabled fast string operations
[ 4543.733112] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4543.744065] Disabled fast string operations
[ 4543.752892] smpboot: CPU 1 is now offline
[ 4543.757395] smpboot: CPU 2 is now offline
[ 4543.762251] smpboot: CPU 3 is now offline
[ 4543.762256] SMP alternatives: switching to UP code
[ 4545.386040] SMP alternatives: switching to SMP code
[ 4545.401597] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4545.412534] Disabled fast string operations
[ 4545.419967] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4545.430921] Disabled fast string operations
[ 4545.436210] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4545.447166] Disabled fast string operations
[ 4545.455656] smpboot: CPU 1 is now offline
[ 4545.461622] smpboot: CPU 2 is now offline
[ 4545.464701] smpboot: CPU 3 is now offline
[ 4545.464706] SMP alternatives: switching to UP code
[ 4547.533623] SMP alternatives: switching to SMP code
[ 4547.551151] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4547.562539] Disabled fast string operations
[ 4547.572136] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4547.583090] Disabled fast string operations
[ 4547.589006] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4547.600235] Disabled fast string operations
[ 4547.607222] smpboot: CPU 1 is now offline
[ 4547.612735] smpboot: CPU 2 is now offline
[ 4547.719388] smpboot: CPU 3 is now offline
[ 4547.719397] SMP alternatives: switching to UP code
[ 4549.158767] SMP alternatives: switching to SMP code
[ 4549.173483] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4549.184424] Disabled fast string operations
[ 4549.192687] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4549.203652] Disabled fast string operations
[ 4549.209833] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4549.221053] Disabled fast string operations
[ 4549.227779] smpboot: CPU 1 is now offline
[ 4549.233203] smpboot: CPU 2 is now offline
[ 4549.236530] smpboot: CPU 3 is now offline
[ 4549.236534] SMP alternatives: switching to UP code
[ 4550.304447] SMP alternatives: switching to SMP code
[ 4550.318992] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4550.329927] Disabled fast string operations
[ 4550.338861] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4550.349851] Disabled fast string operations
[ 4550.355584] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4550.366529] Disabled fast string operations
[ 4550.373957] smpboot: CPU 1 is now offline
[ 4550.379025] smpboot: CPU 2 is now offline
[ 4550.485436] smpboot: CPU 3 is now offline
[ 4550.485444] SMP alternatives: switching to UP code
[ 4585.386460] SMP alternatives: switching to SMP code
[ 4585.401068] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4585.412003] Disabled fast string operations
[ 4585.422566] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4585.433664] Disabled fast string operations
[ 4585.440059] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4585.451004] Disabled fast string operations
[ 4585.560558] smpboot: CPU 1 is now offline
[ 4585.565943] smpboot: CPU 2 is now offline
[ 4585.576414] smpboot: CPU 3 is now offline
[ 4585.576422] SMP alternatives: switching to UP code
[ 4585.596770] SMP alternatives: switching to SMP code
[ 4585.604067] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4585.615002] Disabled fast string operations
[ 4585.624097] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4585.635042] Disabled fast string operations
[ 4585.640915] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4585.651885] Disabled fast string operations
[ 4597.029866] smpboot: CPU 1 is now offline
[ 4597.037720] smpboot: CPU 2 is now offline
[ 4597.148346] smpboot: CPU 3 is now offline
[ 4597.148355] SMP alternatives: switching to UP code
[ 4597.178539] SMP alternatives: switching to SMP code
[ 4597.186332] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4597.197268] Disabled fast string operations
[ 4597.205782] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4597.216737] Disabled fast string operations
[ 4597.223156] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4597.234128] Disabled fast string operations
[ 4599.595539] smpboot: CPU 1 is now offline
[ 4599.601808] smpboot: CPU 2 is now offline
[ 4599.714542] smpboot: CPU 3 is now offline
[ 4599.714551] SMP alternatives: switching to UP code
[ 4599.742194] SMP alternatives: switching to SMP code
[ 4599.749149] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4599.760085] Disabled fast string operations
[ 4599.770335] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4599.781305] Disabled fast string operations
[ 4599.787340] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4599.798582] Disabled fast string operations
[ 4601.075528] smpboot: CPU 1 is now offline
[ 4601.086916] smpboot: CPU 2 is now offline
[ 4601.093014] smpboot: CPU 3 is now offline
[ 4601.093022] SMP alternatives: switching to UP code
[ 4601.115152] SMP alternatives: switching to SMP code
[ 4601.122362] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4601.133299] Disabled fast string operations
[ 4601.143619] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4601.154571] Disabled fast string operations
[ 4601.161562] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4601.172509] Disabled fast string operations
[ 4606.510377] smpboot: CPU 1 is now offline
[ 4606.516600] smpboot: CPU 2 is now offline
[ 4606.625665] smpboot: CPU 3 is now offline
[ 4606.625675] SMP alternatives: switching to UP code
[ 4606.646076] SMP alternatives: switching to SMP code
[ 4606.653526] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4606.664463] Disabled fast string operations
[ 4606.673810] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4606.684788] Disabled fast string operations
[ 4606.691805] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4606.703128] Disabled fast string operations
[ 4665.272117] smpboot: CPU 1 is now offline
[ 4665.276707] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4665.287686] Disabled fast string operations
[ 4665.296908] smpboot: CPU 2 is now offline
[ 4665.299006] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4665.309959] Disabled fast string operations
[ 4665.420039] smpboot: CPU 3 is now offline
[ 4665.424348] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4665.435590] Disabled fast string operations
[ 4774.518733] smpboot: CPU 1 is now offline
[ 4774.523277] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4774.534252] Disabled fast string operations
[ 4774.544327] smpboot: CPU 2 is now offline
[ 4774.548637] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4774.559592] Disabled fast string operations
[ 4774.670585] smpboot: CPU 3 is now offline
[ 4774.675167] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4774.686111] Disabled fast string operations
[ 5160.987985] smpboot: CPU 1 is now offline
[ 5160.996914] smpboot: CPU 2 is now offline
[ 5161.001858] smpboot: CPU 3 is now offline
[ 5161.001862] SMP alternatives: switching to UP code
[ 5191.244120] SMP alternatives: switching to SMP code
[ 5191.259556] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 5191.270494] Disabled fast string operations
[ 5191.282536] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 5191.293505] Disabled fast string operations
[ 5191.301894] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5191.312878] Disabled fast string operations
[ 5197.200921] smpboot: CPU 1 is now offline
[ 5197.209673] smpboot: CPU 2 is now offline
[ 5197.219064] smpboot: CPU 3 is now offline
[ 5197.219095] SMP alternatives: switching to UP code
[ 5202.436518] SMP alternatives: switching to SMP code
[ 5202.451244] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 5202.462179] Disabled fast string operations
[ 5202.471215] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 5202.482193] Disabled fast string operations
[ 5202.492101] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5202.503172] Disabled fast string operations
[ 5207.994813] smpboot: CPU 1 is now offline
[ 5208.005361] smpboot: CPU 2 is now offline
[ 5208.014400] smpboot: CPU 3 is now offline
[ 5208.014408] SMP alternatives: switching to UP code
[ 5214.081630] SMP alternatives: switching to SMP code
[ 5214.097648] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 5214.108583] Disabled fast string operations
[ 5214.115035] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 5214.125989] Disabled fast string operations
[ 5214.132289] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5214.143248] Disabled fast string operations
[ 5220.252649] smpboot: CPU 1 is now offline
[ 5220.260358] smpboot: CPU 2 is now offline
[ 5220.268989] smpboot: CPU 3 is now offline
[ 5220.268997] SMP alternatives: switching to UP code
[ 5225.250405] SMP alternatives: switching to SMP code
[ 5225.265161] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 5225.276096] Disabled fast string operations
[ 5225.290248] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 5225.301228] Disabled fast string operations
[ 5225.308684] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5225.319654] Disabled fast string operations
[ 5231.159165] smpboot: CPU 1 is now offline
[ 5231.165224] smpboot: CPU 2 is now offline
[ 5231.171725] smpboot: CPU 3 is now offline
[ 5231.171732] SMP alternatives: switching to UP code
[ 5235.257145] SMP alternatives: switching to SMP code
[ 5235.272093] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 5235.283029] Disabled fast string operations
[ 5235.290307] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 5235.301259] Disabled fast string operations
[ 5235.309841] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5235.320810] Disabled fast string operations
[ 5243.920986] smpboot: CPU 1 is now offline
[ 5243.929378] smpboot: CPU 2 is now offline
[ 5243.936420] smpboot: CPU 3 is now offline
[ 5243.936425] SMP alternatives: switching to UP code
[ 5248.481550] SMP alternatives: switching to SMP code
[ 5248.496157] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 5248.507092] Disabled fast string operations
[ 5248.516387] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 5248.527338] Disabled fast string operations
[ 5248.533332] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5248.544271] Disabled fast string operations
[unhandled content-type:application/octet-stream]
\
 
 \ /
  Last update: 2012-08-23 12:41    [W:0.177 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site