lkml.org 
[lkml]   [2012]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] microblaze: improve failure handling for GPIO reset
From
On Thu, Aug 9, 2012 at 4:43 AM, Stephan Linz <linz@li-pro.net> wrote:
> Early exit from of_platform_reset_gpio_probe() if there
> was no GPIO reset line configured.
>
> Avoid kernel oops in gpio_system_reset():
>
> [ 96.603690] Restarting system.
> [ 96.606094] Machine restart...
> [ 96.608810] Oops: kernel access of bad area, sig: 11
> [ 96.613662] Registers dump: mode=824C1D1C
> [ 96.617858] r1=C000BB0C, r2=00000000, r3=FFFFFEF8, r4=000015B4
> [ 96.623736] r5=C0276270, r6=00000001, r7=FFFFFFFF, r8=000015B4
> [ 96.629597] r9=000015B3, r10=000015B4, r11=00000000, r12=00000000
> [ 96.635733] r13=00000000, r14=0000000F, r15=C0002B04, r16=00000000
> [ 96.641973] r17=C011E1A0, r18=80000115, r19=00000010, r20=48184ED8
> [ 96.648184] r21=00000000, r22=FFFFFFEA, r23=00000001, r24=FEE1DEAD
> [ 96.654396] r25=00000054, r26=1000B1C8, r27=00000000, r28=00000000
> [ 96.660622] r29=00000000, r30=00000000, r31=C24A97E0, rPC=C011E1A0
> [ 96.666849] msr=000042A2, ear=0000004C, esr=00000872, fsr=362E3639
>
> Signed-off-by: Stephan Linz <linz@li-pro.net>

Tested-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>

> ---
> v2 Remove additional printk message from machine_restart()
> ---
> arch/microblaze/kernel/reset.c | 6 +++++-
> 1 files changed, 5 insertions(+), 1 deletions(-)
>
> diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
> index 8d663d9..c021123 100644
> --- a/arch/microblaze/kernel/reset.c
> +++ b/arch/microblaze/kernel/reset.c
> @@ -28,6 +28,7 @@ void of_platform_reset_gpio_probe(void)
> if (!gpio_is_valid(handle)) {
> printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n",
> handle, "reset");
> + return;
> }
>
> ret = gpio_request(handle, "reset");
> @@ -60,7 +61,10 @@ err:
>
> static void gpio_system_reset(void)
> {
> - gpio_set_value(handle, 1 - reset_val);
> + if (gpio_is_valid(handle))
> + gpio_set_value(handle, 1 - reset_val);
> + else
> + printk(KERN_NOTICE "Reset GPIO unavailable - halting!\n");
> }
> #else
> static void gpio_system_reset(void)
> --
> 1.7.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


\
 
 \ /
  Last update: 2012-08-22 08:41    [W:0.060 / U:1.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site