lkml.org 
[lkml]   [2012]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARM: OMAP: hwmod: revise deassert sequence
Date
For a reset sequence to complete cleanly, a module needs its
associated clocks to be enabled, otherwise the timeout check
in prcm code can print a false failure (failed to hardreset)
that occurs because the clocks aren't powered ON and the status
bit checked can't transition without them.

Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>
---
arch/arm/mach-omap2/omap_hwmod.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index eaedc33..b65e021 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1509,6 +1509,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
{
struct omap_hwmod_rst_info ohri;
int ret = -EINVAL;
+ int hwsup = 0;

if (!oh)
return -EINVAL;
@@ -1520,10 +1521,46 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
if (IS_ERR_VALUE(ret))
return ret;

+ if (oh->clkdm) {
+ /*
+ * A clockdomain must be in SW_SUP otherwise reset
+ * might not be completed. The clockdomain can be set
+ * in HW_AUTO only when the module become ready.
+ */
+ hwsup = clkdm_in_hwsup(oh->clkdm);
+ ret = clkdm_hwmod_enable(oh->clkdm, oh);
+ if (ret) {
+ WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
+ oh->name, oh->clkdm->name, ret);
+ return ret;
+ }
+ }
+
+ _enable_clocks(oh);
+ if (soc_ops.enable_module)
+ soc_ops.enable_module(oh);
+
ret = soc_ops.deassert_hardreset(oh, &ohri);
+
+ if (soc_ops.disable_module)
+ soc_ops.disable_module(oh);
+ _disable_clocks(oh);
+
if (ret == -EBUSY)
pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);

+ if (!ret) {
+ /*
+ * Set the clockdomain to HW_AUTO, assuming that the
+ * previous state was HW_AUTO.
+ */
+ if (oh->clkdm && hwsup)
+ clkdm_allow_idle(oh->clkdm);
+ } else {
+ if (oh->clkdm)
+ clkdm_hwmod_disable(oh->clkdm, oh);
+ }
+
return ret;
}

--
1.7.9.5


\
 
 \ /
  Last update: 2012-08-22 08:21    [W:0.061 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site