lkml.org 
[lkml]   [2012]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] DMA/RaidEngine: Enable FSL RaidEngine
From
Date

On Aug 22, 2012, at 1:24 AM, <b29237@freescale.com> <b29237@freescale.com> wrote:

> From: Xuelin Shi <b29237@freescale.com>
>
> The RaidEngine is a new FSL hardware that used as hardware acceration
> for RAID5/6.
>
> This patch enables the RaidEngine functionality and provides hardware
> offloading capability for memcpy, xor and raid6 pq computation. It works
> under dmaengine control with async_layer interface.
>
> Signed-off-by: Harninder Rai <harninder.rai@freescale.com>
> Signed-off-by: Naveen Burmi <naveenburmi@freescale.com>
> Signed-off-by: Xuelin Shi <b29237@freescale.com>
> ---
> arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 1 +
> arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 6 +
> arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi | 85 ++
> drivers/dma/Kconfig | 14 +
> drivers/dma/Makefile | 1 +
> drivers/dma/fsl_raid.c | 1090 ++++++++++++++++++++++++
> drivers/dma/fsl_raid.h | 294 +++++++
> 7 files changed, 1491 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi
> create mode 100644 drivers/dma/fsl_raid.c
> create mode 100644 drivers/dma/fsl_raid.h

Where is the dts binding spec related to qoriq-raid1.0-0.dtsi ?

We should split the device tree parts into a separate patch as they can be reviewed & accepted separate from the driver code.

- k

\
 
 \ /
  Last update: 2012-08-22 19:01    [W:0.078 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site