lkml.org 
[lkml]   [2012]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] tty: move the async flags from the serial code into the tty includes
From
On Tue, Aug 21, 2012 at 9:35 PM, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> Huang - how about we add this patch first which moves the flags somewhere more sensible
thanks.

I am really happy with this patch.

Huang Shijie

> and then your helper function (and probably a few others) would merge cleanly ?
>
> Alan
> --
>
>
> From: Alan Cox <alan@linux.intel.com>
>
> These are used with the tty_port flags which are tty generic so move the
> flags into a more sensible place. This then makes it possible to add
> helpers such as those suggested by Huang Shijie.
>
> Signed-off-by: Alan Cox <alan@linux.intel.com>
> ---
>
> include/linux/serial.h | 2 +
> include/linux/tty.h | 1 +
> include/linux/tty_flags.h | 78 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 81 insertions(+)
> create mode 100644 include/linux/tty_flags.h
>
> diff --git a/include/linux/serial.h b/include/linux/serial.h
> index 90e9f98..d63866d 100644
> --- a/include/linux/serial.h
> +++ b/include/linux/serial.h
> @@ -15,6 +15,8 @@
> #ifdef __KERNEL__
> #include <asm/page.h>
>
> +#include <linux/tty_flags.h>
> +
> /*
> * Counters of the input lines (CTS, DSR, RI, CD) interrupts
> */
> diff --git a/include/linux/tty.h b/include/linux/tty.h
> index 69a787f..dbebd1e 100644
> --- a/include/linux/tty.h
> +++ b/include/linux/tty.h
> @@ -43,6 +43,7 @@
> #include <linux/tty_driver.h>
> #include <linux/tty_ldisc.h>
> #include <linux/mutex.h>
> +#include <linux/tty_flags.h>
>
>
>
> diff --git a/include/linux/tty_flags.h b/include/linux/tty_flags.h
> new file mode 100644
> index 0000000..eefcb48
> --- /dev/null
> +++ b/include/linux/tty_flags.h
> @@ -0,0 +1,78 @@
> +#ifndef _LINUX_TTY_FLAGS_H
> +#define _LINUX_TTY_FLAGS_H
> +
> +/*
> + * Definitions for async_struct (and serial_struct) flags field also
> + * shared by the tty_port flags structures.
> + *
> + * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
> + */
> +#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
> + * on the callout port */
> +#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
> +#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
> +#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
> +#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
> +#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
> +#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
> +#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
> + * autoconfiguration */
> +#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
> +#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
> +#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
> +#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
> +#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
> +#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
> +#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
> + * checks. Note: can be dangerous! */
> +#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
> +#define ASYNCB_LAST_USER 15
> +
> +/* Internal flags used only by kernel */
> +#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
> +#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
> +#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
> +#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
> +#define ASYNCB_CLOSING 27 /* Serial port is closing */
> +#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
> +#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
> +#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
> +#define ASYNCB_CONS_FLOW 23 /* flow control for console */
> +#define ASYNCB_FIRST_KERNEL 22
> +
> +#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
> +#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
> +#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
> +#define ASYNC_SAK (1U << ASYNCB_SAK)
> +#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
> +#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
> +#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
> +#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
> +#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
> +#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
> +#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
> +#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
> +#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
> +#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
> +#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
> +#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
> +#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
> +
> +#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
> +#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
> + ASYNC_LOW_LATENCY)
> +#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
> +#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
> +#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
> +
> +#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
> +#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
> +#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
> +#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
> +#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
> +#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
> +#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
> +#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
> +#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
> +
> +#endif
>


\
 
 \ /
  Last update: 2012-08-21 18:21    [W:0.420 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site