lkml.org 
[lkml]   [2012]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 3/5] virtio_balloon: introduce migration primitives to balloon pages
On Tue, Aug 21, 2012 at 09:47:46AM -0300, Rafael Aquini wrote:
> Memory fragmentation introduced by ballooning might reduce significantly
> the number of 2MB contiguous memory blocks that can be used within a guest,
> thus imposing performance penalties associated with the reduced number of
> transparent huge pages that could be used by the guest workload.
>
> Besides making balloon pages movable at allocation time and introducing
> the necessary primitives to perform balloon page migration/compaction,
> this patch also introduces the following locking scheme to provide the
> proper synchronization and protection for struct virtio_balloon elements
> against concurrent accesses due to parallel operations introduced by
> memory compaction / page migration.
> - balloon_lock (mutex) : synchronizes the access demand to elements of
> struct virtio_balloon and its queue operations;
> - pages_lock (spinlock): special protection to balloon pages list against
> concurrent list handling operations;
> - virtio_baloon->pages list handling sync by RCU operations;
>
> Signed-off-by: Rafael Aquini <aquini@redhat.com>
> ---
> drivers/virtio/virtio_balloon.c | 210 +++++++++++++++++++++++++++++++++++++---
> 1 file changed, 199 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
> index 0908e60..bda7bb0 100644
> --- a/drivers/virtio/virtio_balloon.c
> +++ b/drivers/virtio/virtio_balloon.c
> @@ -27,6 +27,7 @@
> #include <linux/delay.h>
> #include <linux/slab.h>
> #include <linux/module.h>
> +#include <linux/balloon_compaction.h>
>
> /*
> * Balloon device works in 4K page units. So each page is pointed to by
> @@ -35,6 +36,12 @@
> */
> #define VIRTIO_BALLOON_PAGES_PER_PAGE (PAGE_SIZE >> VIRTIO_BALLOON_PFN_SHIFT)
>
> +/* flags used to hint compaction procedures about the balloon device status */
> +enum balloon_status_flags {
> + BALLOON_REMOVAL = 0, /* balloon device is under removal steps */
> + BALLOON_OK, /* balloon device is up and running */
> +};
> +
> struct virtio_balloon
> {
> struct virtio_device *vdev;
> @@ -46,11 +53,24 @@ struct virtio_balloon
> /* The thread servicing the balloon. */
> struct task_struct *thread;
>
> + /* balloon special page->mapping */
> + struct address_space *mapping;
> +
> + /* Synchronize access/update to this struct virtio_balloon elements */
> + struct mutex balloon_lock;
> +
> /* Waiting for host to ack the pages we released. */
> wait_queue_head_t acked;
>
> /* Number of balloon pages we've told the Host we're not using. */
> unsigned int num_pages;
> +
> + /* balloon device status flag */
> + unsigned short balloon_status;
> +
> + /* Protect 'pages' list against concurrent handling */
> + spinlock_t pages_lock;
> +
> /*
> * The pages we've told the Host we're not using.
> * Each page on this list adds VIRTIO_BALLOON_PAGES_PER_PAGE
> @@ -122,13 +142,17 @@ static void set_page_pfns(u32 pfns[], struct page *page)
>
> static void fill_balloon(struct virtio_balloon *vb, size_t num)
> {
> + /* Get the proper GFP alloc mask from vb->mapping flags */
> + gfp_t vb_gfp_mask = mapping_gfp_mask(vb->mapping);
> +
> /* We can only do one array worth at a time. */
> num = min(num, ARRAY_SIZE(vb->pfns));
>
> + mutex_lock(&vb->balloon_lock);
> for (vb->num_pfns = 0; vb->num_pfns < num;
> vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) {
> - struct page *page = alloc_page(GFP_HIGHUSER | __GFP_NORETRY |
> - __GFP_NOMEMALLOC | __GFP_NOWARN);
> + struct page *page = alloc_page(vb_gfp_mask | __GFP_NORETRY |
> + __GFP_NOWARN | __GFP_NOMEMALLOC);
> if (!page) {
> if (printk_ratelimit())
> dev_printk(KERN_INFO, &vb->vdev->dev,
> @@ -141,7 +165,10 @@ static void fill_balloon(struct virtio_balloon *vb, size_t num)
> set_page_pfns(vb->pfns + vb->num_pfns, page);
> vb->num_pages += VIRTIO_BALLOON_PAGES_PER_PAGE;
> totalram_pages--;
> - list_add(&page->lru, &vb->pages);
> + spin_lock(&vb->pages_lock);
> + list_add_rcu(&page->lru, &vb->pages);
> + assign_balloon_mapping(page, vb->mapping);
> + spin_unlock(&vb->pages_lock);
> }
>
> /* Didn't get any? Oh well. */
> @@ -149,6 +176,7 @@ static void fill_balloon(struct virtio_balloon *vb, size_t num)
> return;
>
> tell_host(vb, vb->inflate_vq);
> + mutex_unlock(&vb->balloon_lock);
> }
>
> static void release_pages_by_pfn(const u32 pfns[], unsigned int num)
> @@ -169,21 +197,48 @@ static void leak_balloon(struct virtio_balloon *vb, size_t num)
> /* We can only do one array worth at a time. */
> num = min(num, ARRAY_SIZE(vb->pfns));
>
> + mutex_lock(&vb->balloon_lock);
> for (vb->num_pfns = 0; vb->num_pfns < num;
> vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) {
> - page = list_first_entry(&vb->pages, struct page, lru);
> - list_del(&page->lru);
> + /*
> + * We can race against 'virtballoon_isolatepage()' and end up
> + * stumbling across a _temporarily_ empty 'pages' list.
> + */
> + spin_lock(&vb->pages_lock);
> + page = list_first_or_null_rcu(&vb->pages, struct page, lru);

Why is list_first_or_null_rcu called outside
RCU critical section here?

> + if (!page) {
> + spin_unlock(&vb->pages_lock);
> + break;
> + }
> + /*
> + * It is safe now to drop page->mapping and delete this page
> + * from balloon page list, since we are grabbing 'pages_lock'
> + * which prevents 'virtballoon_isolatepage()' from acting.
> + */
> + clear_balloon_mapping(page);
> + list_del_rcu(&page->lru);
> + spin_unlock(&vb->pages_lock);
> set_page_pfns(vb->pfns + vb->num_pfns, page);
> vb->num_pages -= VIRTIO_BALLOON_PAGES_PER_PAGE;
> }
> + /*
> + * Syncrhonize RCU grace period and wait for all RCU read critical side
> + * sections to finish before proceeding with page release steps.
> + * This avoids compaction/migration callback races against balloon
> + * device removal steps.
> + */
> + synchronize_rcu();
>
> /*
> * Note that if
> * virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
> * is true, we *have* to do it in this order
> */
> - tell_host(vb, vb->deflate_vq);
> - release_pages_by_pfn(vb->pfns, vb->num_pfns);
> + if (vb->num_pfns > 0) {
> + tell_host(vb, vb->deflate_vq);
> + release_pages_by_pfn(vb->pfns, vb->num_pfns);
> + }
> + mutex_unlock(&vb->balloon_lock);
> }
>
> static inline void update_stat(struct virtio_balloon *vb, int idx,
> @@ -239,6 +294,7 @@ static void stats_handle_request(struct virtio_balloon *vb)
> struct scatterlist sg;
> unsigned int len;
>
> + mutex_lock(&vb->balloon_lock);
> vb->need_stats_update = 0;
> update_balloon_stats(vb);
>
> @@ -249,6 +305,7 @@ static void stats_handle_request(struct virtio_balloon *vb)
> if (virtqueue_add_buf(vq, &sg, 1, 0, vb, GFP_KERNEL) < 0)
> BUG();
> virtqueue_kick(vq);
> + mutex_unlock(&vb->balloon_lock);
> }
>
> static void virtballoon_changed(struct virtio_device *vdev)
> @@ -261,22 +318,27 @@ static void virtballoon_changed(struct virtio_device *vdev)
> static inline s64 towards_target(struct virtio_balloon *vb)
> {
> __le32 v;
> - s64 target;
> + s64 target, actual;
>
> + mutex_lock(&vb->balloon_lock);
> + actual = vb->num_pages;
> vb->vdev->config->get(vb->vdev,
> offsetof(struct virtio_balloon_config, num_pages),
> &v, sizeof(v));
> target = le32_to_cpu(v);
> - return target - vb->num_pages;
> + mutex_unlock(&vb->balloon_lock);
> + return target - actual;
> }
>
> static void update_balloon_size(struct virtio_balloon *vb)
> {
> - __le32 actual = cpu_to_le32(vb->num_pages);
> -
> + __le32 actual;
> + mutex_lock(&vb->balloon_lock);
> + actual = cpu_to_le32(vb->num_pages);
> vb->vdev->config->set(vb->vdev,
> offsetof(struct virtio_balloon_config, actual),
> &actual, sizeof(actual));
> + mutex_unlock(&vb->balloon_lock);
> }
>
> static int balloon(void *_vballoon)
> @@ -339,9 +401,117 @@ static int init_vqs(struct virtio_balloon *vb)
> return 0;
> }
>
> +#ifdef CONFIG_BALLOON_COMPACTION
> +/*
> + * Populate balloon_mapping->a_ops callback method to perform the balloon
> + * page migration task.
> + *
> + * After a ballooned page gets isolated by compaction procedures, this is the
> + * function that performs the page migration on behalf of move_to_new_page(),
> + * when the last calls (page)->mapping->a_ops->migratepage.
> + *
> + * Page migration for virtio balloon is done in a simple swap fashion which
> + * follows these two steps:
> + * 1) insert newpage into vb->pages list and update the host about it;
> + * 2) update the host about the removed old page from vb->pages list;
> + */
> +int virtballoon_migratepage(struct address_space *mapping,
> + struct page *newpage, struct page *page, enum migrate_mode mode)
> +{
> + struct virtio_balloon *vb = (void *)__page_balloon_device(page);

Don't cast to void *.

> +
> + /* at this point, besides very unlikely, a NULL *vb is a serious bug */

A bit of a strange comment. Either it's unlikely or a bug :)
Besides, vb is checked for NULL value, not *vb.

> + BUG_ON(!vb);
> +
> + /*
> + * Skip page migration step if the memory balloon device is under its
> + * removal procedure, to avoid racing against module unload.
> + *

What kind of race does this fix? Why does not
leaking all pages fix it?

> + * If there still are isolated (balloon) pages under migration lists,
> + * 'virtballoon_putbackpage()' will take care of them properly, before
> + * the module unload finishes.
> + */
> + if (vb->balloon_status == BALLOON_REMOVAL)
> + return -EAGAIN;
> +
> + mutex_lock(&vb->balloon_lock);
> +
> + /* balloon's page migration 1st step */
> + vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> + spin_lock(&vb->pages_lock);
> + list_add_rcu(&newpage->lru, &vb->pages);
> + spin_unlock(&vb->pages_lock);
> + set_page_pfns(vb->pfns, newpage);
> + tell_host(vb, vb->inflate_vq);
> +
> + /* balloon's page migration 2nd step */
> + vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> + set_page_pfns(vb->pfns, page);
> + tell_host(vb, vb->deflate_vq);
> +
> + mutex_unlock(&vb->balloon_lock);
> + return 0;
> +}
> +
> +/*
> + * Populate balloon_mapping->a_ops callback method to help compaction on
> + * isolating a page from the balloon page list for posterior migration.
> + */
> +int virtballoon_isolatepage(struct page *page)
> +{
> + struct virtio_balloon *vb = (void *)__page_balloon_device(page);

Cast here looks wrong.

> + int ret = 0;
> + /*
> + * If we stumble across a NULL *vb here, it means this page has been
> + * already released by 'leak_balloon()'.
> + *
> + * We also skip the page isolation step if the memory balloon device is
> + * under its removal procedure, to avoid racing against module unload.
> + */

What kind of race do you have in mind here?
Doesn't leaking all pages in module removal address it?

> + if (vb


How can vb be NULL? Pls document.

> && (vb->balloon_status != BALLOON_REMOVAL)) {

Read of balloon_status needs some kind of memory barrier I think.

> + spin_lock(&vb->pages_lock);
> + /*
> + * virtballoon_isolatepage() can race against leak_balloon(),
> + * and (wrongly) isolate a page that is about to be freed.
> + * Test page->mapping under pages_lock to close that window.
> + */
> + if (rcu_access_pointer(page->mapping) == vb->mapping) {
> + /* It is safe to isolate this page, now */
> + list_del_rcu(&page->lru);
> + ret = 1;
> + }
> + spin_unlock(&vb->pages_lock);
> + }
> + return ret;
> +}
> +
> +/*
> + * Populate balloon_mapping->a_ops callback method to help compaction on
> + * re-inserting a not-migrated isolated page into the balloon page list.
> + */
> +void virtballoon_putbackpage(struct page *page)
> +{
> + struct virtio_balloon *vb = (void *)__page_balloon_device(page);
> +
> + /* at this point, besides very unlikely, a NULL *vb is a serious bug */

A bit of a strange comment. Either it's unlikely or a bug :)
Besides, vb is checked for NULL value, not *vb.

> + BUG_ON(!vb);
> +
> + spin_lock(&vb->pages_lock);
> + list_add_rcu(&page->lru, &vb->pages);
> + spin_unlock(&vb->pages_lock);
> +}
> +#endif /* CONFIG_BALLOON_COMPACTION */
> +
> +/* define the balloon_mapping->a_ops callbacks to allow compaction/migration */
> +static DEFINE_BALLOON_MAPPING_AOPS(virtio_balloon_aops,
> + virtballoon_migratepage,
> + virtballoon_isolatepage,
> + virtballoon_putbackpage);
> +
> static int virtballoon_probe(struct virtio_device *vdev)
> {
> struct virtio_balloon *vb;
> + struct address_space *vb_mapping;
> int err;
>
> vdev->priv = vb = kmalloc(sizeof(*vb), GFP_KERNEL);
> @@ -351,12 +521,24 @@ static int virtballoon_probe(struct virtio_device *vdev)
> }
>
> INIT_LIST_HEAD(&vb->pages);
> + spin_lock_init(&vb->pages_lock);
> + mutex_init(&vb->balloon_lock);
> +
> vb->num_pages = 0;
> init_waitqueue_head(&vb->config_change);
> init_waitqueue_head(&vb->acked);
> vb->vdev = vdev;
> vb->need_stats_update = 0;
>
> + /* Allocate a special page->mapping for this balloon device */

This comment is not helpful, pls remove.

> + vb_mapping = alloc_balloon_mapping((void *)vb, &virtio_balloon_aops);

Cast to void * is not needed.

> + if (!vb_mapping) {
> + err = -ENOMEM;
> + goto out_free_vb;
> + }
> + /* Store the page->mapping reference for this balloon device */
> + vb->mapping = vb_mapping;

This comment is not helpful, pls remove.

> +
> err = init_vqs(vb);
> if (err)
> goto out_free_vb;
> @@ -367,12 +549,14 @@ static int virtballoon_probe(struct virtio_device *vdev)
> goto out_del_vqs;
> }
>
> + vb->balloon_status = BALLOON_OK;
> return 0;
>
> out_del_vqs:
> vdev->config->del_vqs(vdev);
> out_free_vb:
> kfree(vb);
> + kfree(vb_mapping);

I think it's better to wrap free for vb mapping too.

> out:
> return err;
> }
> @@ -394,8 +578,10 @@ static void __devexit virtballoon_remove(struct virtio_device *vdev)
> {
> struct virtio_balloon *vb = vdev->priv;
>
> + vb->balloon_status = BALLOON_REMOVAL;

This needs some kind of barrier.

> kthread_stop(vb->thread);
> remove_common(vb);
> + kfree(vb->mapping);
> kfree(vb);
> }
>
> @@ -409,6 +595,7 @@ static int virtballoon_freeze(struct virtio_device *vdev)
> * function is called.
> */
>
> + vb->balloon_status = BALLOON_REMOVAL;

Here module is not going away so why change status?

> remove_common(vb);
> return 0;
> }
> @@ -424,6 +611,7 @@ static int virtballoon_restore(struct virtio_device *vdev)
>
> fill_balloon(vb, towards_target(vb));
> update_balloon_size(vb);
> + vb->balloon_status = BALLOON_OK;

Isn't this too late to set status here? We filled the balloon ...


> return 0;
> }
> #endif
> --
> 1.7.11.4


\
 
 \ /
  Last update: 2012-08-21 17:21    [W:0.134 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site