lkml.org 
[lkml]   [2012]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC/PATCH 00/13] OMAP UART patches
On Tue, Aug 21, 2012 at 2:45 PM, Felipe Balbi <balbi@ti.com> wrote:
> Hi guys,
>
> here's a series of cleanup patches to the OMAP serial
> driver. A later series could be made re-implementing
> DMA using the DMA Engine API. Note that for RX DMA
> we could be using RX Timeout IRQ as a hint that we better
> use PIO instead ;-)
>
> All patches were tested on my pandaboard, but I'd really
> like to receive Tested-by on other platforms.
>
> After this goes in, I'll probably try to get UART wakeup
> working again and only after that look at DMA.
>
> cheers
>
> Felipe Balbi (13):
> serial: omap: define and use to_uart_omap_port()
> serial: omap: always return IRQ_HANDLED
> serial: omap: define helpers for pdata function pointers
> serial: omap: don't access the platform_device
> serial: omap: drop DMA support
> serial: add OMAP-specific defines
> serial: omap: simplify IRQ handling
> serial: omap: refactor receive_chars() into rdi/rlsi handlers
> serial: omap: move THRE check to transmit_chars()
> serial: omap: stick to put_autosuspend
> serial: omap: set dev->drvdata before enabling pm_runtime
> serial: omap: drop unnecessary check from remove
> serial: omap: make sure to suspend device before remove
>
Apart from that one question on last patch, rest of the clean-up
is really good. Nice work.

FWIW,
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>


\
 
 \ /
  Last update: 2012-08-21 13:21    [W:0.167 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site