lkml.org 
[lkml]   [2012]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 1/2] UBI: replace MTD_UBI_BEB_LIMIT with module parameter
From
Date
Richard, would you please split this series differently:

1. Separate out the calculations to the get_bad_peb_limit() func.
2. Invent
2. Add the module parameter
3. Extends the ioctl
4. Removes the Kconfig option

This will be much easier to review.

See also some comments below.

> --- a/drivers/mtd/ubi/build.c
> +++ b/drivers/mtd/ubi/build.c
> @@ -46,6 +46,8 @@
> /* Maximum length of the 'mtd=' parameter */
> #define MTD_PARAM_LEN_MAX 64
>
> +#define MTD_PARAM_NB_MAX 3

Please, make it to be

/* Maximum number of comma-separated items in ht 'mtd=' parameter */
#define MTD_PARAM_MAX_COUNT 3

instead.

> @@ -57,10 +59,12 @@
> * @name: MTD character device node path, MTD device name, or MTD device number
> * string
> * @vid_hdr_offs: VID header offset
> + * @max_beb_per1024: maximum expected number of bad blocks per 1024 erase blocks
> */
> struct mtd_dev_param {
> char name[MTD_PARAM_LEN_MAX];
> int vid_hdr_offs;
> + unsigned int max_beb_per1024;
> };

Please, make it to be just 'int' here and everywhere, just for
consistency with other parameters, which are 'int' (no other stronger
reason).

> MODULE_PARM_DESC(mtd, "MTD devices to attach. Parameter format: "
> - "mtd=<name|num|path>[,<vid_hdr_offs>].\n"
> + "mtd=<name|num|path>[,<vid_hdr_offs>[,max_beb_per1024]].\n"
> "Multiple \"mtd\" parameters may be specified.\n"
> "MTD devices may be specified by their number, name, or "
> "path to the MTD character device node.\n"
> "Optional \"vid_hdr_offs\" parameter specifies UBI VID "
> "header position to be used by UBI.\n"

This comment needs improvement. Consider a situation when I do not want
to specify vid_hdr_offs (want to use the default), but want to specify
max_beb_per1024. I think I can put 0 here which means "default". Would
you please verify this and add a comment about this in this help output.
Also, please, verify that the output looks OK using 'modinfo ubi'.

> + "Optional \"max_beb_per1024\" parameter specifies the "
> + "maximum expected bad eraseblock per 1024 eraseblocks."
> + "(default " __stringify(MTD_UBI_DEFAULT_BEB_LIMIT)
> + " if 0 or not set)\n"

Yeah, something like "if 0 or not set" is needed for 'vid_hdr_offs' as
well.

> "Example 1: mtd=/dev/mtd0 - attach MTD device "
> "/dev/mtd0.\n"
> "Example 2: mtd=content,1984 mtd=4 - attach MTD device "

Could you also modify one of the examples and add "max_beb_per1024"
there?

--
Best Regards,
Artem Bityutskiy
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2012-08-17 11:01    [W:0.595 / U:24.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site