lkml.org 
[lkml]   [2012]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 7/17] input: RMI4 F01 device control
Date
Signed-off-by: Christopher Heiny <cheiny@synaptics.com>

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Cc: Joeri de Gram <j.de.gram@gmail.com>

Acked-by: Jean Delvare <khali@linux-fr.org>

---

drivers/input/rmi4/rmi_f01.c | 1331 ++++++++++++++++++++++++++++++++++++++++++
drivers/input/rmi4/rmi_f01.h | 88 +++
2 files changed, 1419 insertions(+), 0 deletions(-)

diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c
new file mode 100644
index 0000000..312ad13
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f01.c
@@ -0,0 +1,1331 @@
+/*
+ * Copyright (c) 2011-2012 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/slab.h>
+#include "rmi_driver.h"
+#include "rmi_f01.h"
+
+union f01_device_commands {
+ struct {
+ u8 reset:1;
+ u8 reserved:1;
+ };
+ u8 reg;
+};
+
+struct f01_device_control {
+ union f01_device_control_0 ctrl0;
+ u8 *interrupt_enable;
+ u8 doze_interval;
+ u8 wakeup_threshold;
+ u8 doze_holdoff;
+};
+
+union f01_query_42 {
+ struct {
+ u8 has_ds4_queries:1;
+ u8 has_multi_phy:1;
+ u8 has_guest:1;
+ u8 reserved:5;
+ };
+ u8 regs[1];
+};
+
+union f01_ds4_queries {
+ struct {
+ u8 length:4;
+ u8 reserved_1:4;
+
+ u8 has_package_id_query:1;
+ u8 has_packrat_query:1;
+ u8 has_reset_query:1;
+ u8 has_maskrev_query:1;
+ u8 reserved_2:4;
+
+ u8 has_i2c_control:1;
+ u8 has_spi_control:1;
+ u8 has_attn_control:1;
+ u8 reserved_3:5;
+
+ u8 reset_enabled:1;
+ u8 reset_polarity:1;
+ u8 pullup_enabled:1;
+ u8 reserved_4:1;
+ u8 reset_pin_number:4;
+ };
+ u8 regs[4];
+};
+
+struct f01_data {
+ struct f01_device_control device_control;
+ union f01_basic_queries basic_queries;
+ union f01_device_status device_status;
+ u8 product_id[RMI_PRODUCT_ID_LENGTH+1];
+
+ u16 interrupt_enable_addr;
+ u16 doze_interval_addr;
+ u16 wakeup_threshold_addr;
+ u16 doze_holdoff_addr;
+
+ int irq_count;
+ int num_of_irq_regs;
+
+#ifdef CONFIG_PM
+ bool suspended;
+ bool old_nosleep;
+#endif
+};
+
+
+static ssize_t rmi_fn_01_productinfo_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_productid_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_manufacturer_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_datecode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_reportrate_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_reportrate_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_01_interrupt_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_interrupt_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_01_doze_interval_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_doze_interval_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_01_wakeup_threshold_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_wakeup_threshold_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_01_doze_holdoff_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_doze_holdoff_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_01_reset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_01_sleepmode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_sleepmode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_01_nosleep_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_nosleep_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_01_chargerinput_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_chargerinput_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_01_configured_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_unconfigured_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_flashprog_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t rmi_fn_01_statuscode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static int rmi_f01_alloc_memory(struct rmi_function_container *fc,
+ int num_of_irq_regs);
+
+static void rmi_f01_free_memory(struct rmi_function_container *fc);
+
+static int rmi_f01_initialize(struct rmi_function_container *fc);
+
+static int rmi_f01_create_sysfs(struct rmi_function_container *fc);
+
+static int rmi_f01_config(struct rmi_function_container *fc);
+
+static int rmi_f01_reset(struct rmi_function_container *fc);
+
+
+static struct device_attribute fn_01_attrs[] = {
+ __ATTR(productinfo, RMI_RO_ATTR,
+ rmi_fn_01_productinfo_show, rmi_store_error),
+ __ATTR(productid, RMI_RO_ATTR,
+ rmi_fn_01_productid_show, rmi_store_error),
+ __ATTR(manufacturer, RMI_RO_ATTR,
+ rmi_fn_01_manufacturer_show, rmi_store_error),
+ __ATTR(datecode, RMI_RO_ATTR,
+ rmi_fn_01_datecode_show, rmi_store_error),
+
+ /* control register access */
+ __ATTR(sleepmode, RMI_RW_ATTR,
+ rmi_fn_01_sleepmode_show, rmi_fn_01_sleepmode_store),
+ __ATTR(nosleep, RMI_RW_ATTR,
+ rmi_fn_01_nosleep_show, rmi_fn_01_nosleep_store),
+ __ATTR(chargerinput, RMI_RW_ATTR,
+ rmi_fn_01_chargerinput_show, rmi_fn_01_chargerinput_store),
+ __ATTR(reportrate, RMI_RW_ATTR,
+ rmi_fn_01_reportrate_show, rmi_fn_01_reportrate_store),
+ __ATTR(interrupt_enable, RMI_RW_ATTR,
+ rmi_fn_01_interrupt_enable_show,
+ rmi_fn_01_interrupt_enable_store),
+ __ATTR(doze_interval, RMI_RW_ATTR,
+ rmi_fn_01_doze_interval_show,
+ rmi_fn_01_doze_interval_store),
+ __ATTR(wakeup_threshold, RMI_RW_ATTR,
+ rmi_fn_01_wakeup_threshold_show,
+ rmi_fn_01_wakeup_threshold_store),
+ __ATTR(doze_holdoff, RMI_RW_ATTR,
+ rmi_fn_01_doze_holdoff_show,
+ rmi_fn_01_doze_holdoff_store),
+
+ /* We make report rate RO, since the driver uses that to look for
+ * resets. We don't want someone faking us out by changing that
+ * bit.
+ */
+ __ATTR(configured, RMI_RO_ATTR,
+ rmi_fn_01_configured_show, rmi_store_error),
+
+ /* Command register access. */
+ __ATTR(reset, RMI_WO_ATTR,
+ rmi_show_error, rmi_fn_01_reset_store),
+
+ /* STatus register access. */
+ __ATTR(unconfigured, RMI_RO_ATTR,
+ rmi_fn_01_unconfigured_show, rmi_store_error),
+ __ATTR(flashprog, RMI_RO_ATTR,
+ rmi_fn_01_flashprog_show, rmi_store_error),
+ __ATTR(statuscode, RMI_RO_ATTR,
+ rmi_fn_01_statuscode_show, rmi_store_error),
+};
+
+/* Utility routine to set the value of a bit field in a register. */
+int rmi_set_bit_field(struct rmi_device *rmi_dev,
+ unsigned short address,
+ unsigned char field_mask,
+ unsigned char bits)
+{
+ unsigned char reg_contents;
+ int retval;
+
+ retval = rmi_read(rmi_dev, address, &reg_contents);
+ if (retval)
+ return retval;
+ reg_contents = (reg_contents & ~field_mask) | bits;
+ retval = rmi_write(rmi_dev, address, reg_contents);
+ if (retval == 1)
+ return 0;
+ else if (retval == 0)
+ return -EIO;
+ return retval;
+}
+
+static ssize_t rmi_fn_01_productinfo_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "0x%02x 0x%02x\n",
+ data->basic_queries.productinfo_1,
+ data->basic_queries.productinfo_2);
+}
+
+static ssize_t rmi_fn_01_productid_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", data->product_id);
+}
+
+static ssize_t rmi_fn_01_manufacturer_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "0x%02x\n",
+ data->basic_queries.manufacturer_id);
+}
+
+static ssize_t rmi_fn_01_datecode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "20%02u-%02u-%02u\n",
+ data->basic_queries.year,
+ data->basic_queries.month,
+ data->basic_queries.day);
+}
+
+static ssize_t rmi_fn_01_reset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_container *fc = NULL;
+ unsigned int reset;
+ int retval = 0;
+ /* Command register always reads as 0, so we can just use a local. */
+ union f01_device_commands commands = {};
+
+ fc = to_rmi_function_container(dev);
+
+ if (sscanf(buf, "%u", &reset) != 1)
+ return -EINVAL;
+ if (reset < 0 || reset > 1)
+ return -EINVAL;
+
+ /* Per spec, 0 has no effect, so we skip it entirely. */
+ if (reset) {
+ commands.reset = 1;
+ retval = rmi_write_block(fc->rmi_dev, fc->fd.command_base_addr,
+ &commands.reg, sizeof(commands.reg));
+ if (retval < 0) {
+ dev_err(dev, "%s: failed to issue reset command, "
+ "error = %d.", __func__, retval);
+ return retval;
+ }
+ }
+
+ return count;
+}
+
+static ssize_t rmi_fn_01_sleepmode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE,
+ "%d\n", data->device_control.ctrl0.sleep_mode);
+}
+
+static ssize_t rmi_fn_01_sleepmode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct f01_data *data = NULL;
+ unsigned long new_value;
+ int retval;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ retval = strict_strtoul(buf, 10, &new_value);
+ if (retval < 0 || !RMI_IS_VALID_SLEEPMODE(new_value)) {
+ dev_err(dev, "%s: Invalid sleep mode %s.", __func__, buf);
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "Setting sleep mode to %ld.", new_value);
+ data->device_control.ctrl0.sleep_mode = new_value;
+ retval = rmi_write_block(fc->rmi_dev, fc->fd.control_base_addr,
+ data->device_control.ctrl0.regs,
+ ARRAY_SIZE(data->device_control.ctrl0.regs));
+ if (retval >= 0)
+ retval = count;
+ else
+ dev_err(dev, "Failed to write sleep mode, code %d.\n", retval);
+ return retval;
+}
+
+static ssize_t rmi_fn_01_nosleep_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ data->device_control.ctrl0.nosleep);
+}
+
+static ssize_t rmi_fn_01_nosleep_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct f01_data *data = NULL;
+ unsigned long new_value;
+ int retval;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ retval = strict_strtoul(buf, 10, &new_value);
+ if (retval < 0 || new_value < 0 || new_value > 1) {
+ dev_err(dev, "%s: Invalid nosleep bit %s.", __func__, buf);
+ return -EINVAL;
+ }
+
+ data->device_control.ctrl0.nosleep = new_value;
+ retval = rmi_write_block(fc->rmi_dev, fc->fd.control_base_addr,
+ data->device_control.ctrl0.regs,
+ ARRAY_SIZE(data->device_control.ctrl0.regs));
+ if (retval >= 0)
+ retval = count;
+ else
+ dev_err(dev, "Failed to write nosleep bit.\n");
+ return retval;
+}
+
+static ssize_t rmi_fn_01_chargerinput_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ data->device_control.ctrl0.charger_input);
+}
+
+static ssize_t rmi_fn_01_chargerinput_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct f01_data *data = NULL;
+ unsigned long new_value;
+ int retval;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ retval = strict_strtoul(buf, 10, &new_value);
+ if (retval < 0 || new_value < 0 || new_value > 1) {
+ dev_err(dev, "%s: Invalid chargerinput bit %s.", __func__, buf);
+ return -EINVAL;
+ }
+
+ data->device_control.ctrl0.charger_input = new_value;
+ retval = rmi_write_block(fc->rmi_dev, fc->fd.control_base_addr,
+ data->device_control.ctrl0.regs,
+ ARRAY_SIZE(data->device_control.ctrl0.regs));
+ if (retval >= 0)
+ retval = count;
+ else
+ dev_err(dev, "Failed to write chargerinput bit.\n");
+ return retval;
+}
+
+static ssize_t rmi_fn_01_reportrate_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ data->device_control.ctrl0.report_rate);
+}
+
+static ssize_t rmi_fn_01_reportrate_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct f01_data *data = NULL;
+ unsigned long new_value;
+ int retval;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ retval = strict_strtoul(buf, 10, &new_value);
+ if (retval < 0 || new_value < 0 || new_value > 1) {
+ dev_err(dev, "%s: Invalid reportrate bit %s.", __func__, buf);
+ return -EINVAL;
+ }
+
+ data->device_control.ctrl0.report_rate = new_value;
+ retval = rmi_write_block(fc->rmi_dev, fc->fd.control_base_addr,
+ data->device_control.ctrl0.regs,
+ ARRAY_SIZE(data->device_control.ctrl0.regs));
+ if (retval >= 0)
+ retval = count;
+ else
+ dev_err(dev, "Failed to write reportrate bit.\n");
+ return retval;
+}
+
+static ssize_t rmi_fn_01_interrupt_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rmi_function_container *fc;
+ struct f01_data *data;
+ int i, len, total_len = 0;
+ char *current_buf = buf;
+
+ fc = to_rmi_function_container(dev);
+ data = fc->data;
+ /* loop through each irq value and copy its
+ * string representation into buf */
+ for (i = 0; i < data->irq_count; i++) {
+ int irq_reg;
+ int irq_shift;
+ int interrupt_enable;
+
+ irq_reg = i / 8;
+ irq_shift = i % 8;
+ interrupt_enable =
+ ((data->device_control.interrupt_enable[irq_reg]
+ >> irq_shift) & 0x01);
+
+ /* get next irq value and write it to buf */
+ len = snprintf(current_buf, PAGE_SIZE - total_len,
+ "%u ", interrupt_enable);
+ /* bump up ptr to next location in buf if the
+ * snprintf was valid. Otherwise issue an error
+ * and return. */
+ if (len > 0) {
+ current_buf += len;
+ total_len += len;
+ } else {
+ dev_err(dev, "%s: Failed to build interrupt_enable"
+ " buffer, code = %d.\n", __func__, len);
+ return snprintf(buf, PAGE_SIZE, "unknown\n");
+ }
+ }
+ len = snprintf(current_buf, PAGE_SIZE - total_len, "\n");
+ if (len > 0)
+ total_len += len;
+ else
+ dev_warn(dev, "%s: Failed to append carriage return.\n",
+ __func__);
+ return total_len;
+
+}
+
+static ssize_t rmi_fn_01_interrupt_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_container *fc;
+ struct f01_data *data;
+ int i;
+ int irq_count = 0;
+ int retval = count;
+ int irq_reg = 0;
+
+ fc = to_rmi_function_container(dev);
+ data = fc->data;
+ for (i = 0; i < data->irq_count && *buf != 0;
+ i++, buf += 2) {
+ int irq_shift;
+ int interrupt_enable;
+ int result;
+
+ irq_reg = i / 8;
+ irq_shift = i % 8;
+
+ /* get next interrupt mapping value and store and bump up to
+ * point to next item in buf */
+ result = sscanf(buf, "%u", &interrupt_enable);
+ if ((result != 1) ||
+ (interrupt_enable != 0 && interrupt_enable != 1)) {
+ dev_err(dev,
+ "%s: Error - interrupt enable[%d]"
+ " is not a valid value 0x%x.\n",
+ __func__, i, interrupt_enable);
+ return -EINVAL;
+ }
+ if (interrupt_enable == 0) {
+ data->device_control.interrupt_enable[irq_reg] &=
+ (1 << irq_shift) ^ 0xFF;
+ } else
+ data->device_control.interrupt_enable[irq_reg] |=
+ (1 << irq_shift);
+ irq_count++;
+ }
+
+ /* Make sure the irq count matches */
+ if (irq_count != data->irq_count) {
+ dev_err(dev,
+ "%s: Error - interrupt enable count of %d"
+ " doesn't match device count of %d.\n",
+ __func__, irq_count, data->irq_count);
+ return -EINVAL;
+ }
+
+ /* write back to the control register */
+ retval = rmi_write_block(fc->rmi_dev, data->interrupt_enable_addr,
+ data->device_control.interrupt_enable,
+ sizeof(u8)*(data->num_of_irq_regs));
+ if (retval < 0) {
+ dev_err(dev, "%s : Could not write interrupt_enable_store"
+ " to 0x%x\n", __func__, data->interrupt_enable_addr);
+ return retval;
+ }
+
+ return count;
+
+}
+
+static ssize_t rmi_fn_01_doze_interval_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ data->device_control.doze_interval);
+
+}
+
+static ssize_t rmi_fn_01_doze_interval_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct f01_data *data = NULL;
+ unsigned long new_value;
+ int retval;
+ u16 ctrl_base_addr;
+
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ retval = strict_strtoul(buf, 10, &new_value);
+ if (retval < 0 || new_value < 0 || new_value > 255) {
+ dev_err(dev, "%s: Invalid doze interval %s.", __func__, buf);
+ return -EINVAL;
+ }
+
+ data->device_control.doze_interval = new_value;
+ ctrl_base_addr = fc->fd.control_base_addr + sizeof(u8) +
+ (sizeof(u8)*(data->num_of_irq_regs));
+ dev_dbg(dev, "doze_interval store address %x, value %d",
+ ctrl_base_addr, data->device_control.doze_interval);
+
+ retval = rmi_write_block(fc->rmi_dev, data->doze_interval_addr,
+ &data->device_control.doze_interval,
+ sizeof(u8));
+ if (retval >= 0)
+ retval = count;
+ else
+ dev_err(dev, "Failed to write doze interval.\n");
+ return retval;
+
+}
+
+static ssize_t rmi_fn_01_wakeup_threshold_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ data->device_control.wakeup_threshold);
+}
+
+static ssize_t rmi_fn_01_wakeup_threshold_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct f01_data *data = NULL;
+ unsigned long new_value;
+ int retval;
+
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ retval = strict_strtoul(buf, 10, &new_value);
+ if (retval < 0 || new_value < 0 || new_value > 255) {
+ dev_err(dev, "%s: Invalid wakeup threshold %s.", __func__, buf);
+ return -EINVAL;
+ }
+
+ data->device_control.doze_interval = new_value;
+ retval = rmi_write_block(fc->rmi_dev, data->wakeup_threshold_addr,
+ &data->device_control.wakeup_threshold,
+ sizeof(u8));
+ if (retval >= 0)
+ retval = count;
+ else
+ dev_err(dev, "Failed to write wakeup threshold.\n");
+ return retval;
+
+}
+
+static ssize_t rmi_fn_01_doze_holdoff_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ data->device_control.doze_holdoff);
+
+}
+
+
+static ssize_t rmi_fn_01_doze_holdoff_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct f01_data *data = NULL;
+ unsigned long new_value;
+ int retval;
+
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ retval = strict_strtoul(buf, 10, &new_value);
+ if (retval < 0 || new_value < 0 || new_value > 255) {
+ dev_err(dev, "%s: Invalid doze holdoff %s.", __func__, buf);
+ return -EINVAL;
+ }
+
+ data->device_control.doze_interval = new_value;
+ retval = rmi_write_block(fc->rmi_dev, data->doze_holdoff_addr,
+ &data->device_control.doze_holdoff,
+ sizeof(u8));
+ if (retval >= 0)
+ retval = count;
+ else
+ dev_err(dev, "Failed to write doze holdoff.\n");
+ return retval;
+
+}
+
+static ssize_t rmi_fn_01_configured_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ data->device_control.ctrl0.configured);
+}
+
+static ssize_t rmi_fn_01_unconfigured_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ data->device_status.unconfigured);
+}
+
+static ssize_t rmi_fn_01_flashprog_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ data->device_status.flash_prog);
+}
+
+static ssize_t rmi_fn_01_statuscode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct f01_data *data = NULL;
+ struct rmi_function_container *fc = to_rmi_function_container(dev);
+
+ data = fc->data;
+
+ return snprintf(buf, PAGE_SIZE, "0x%02x\n",
+ data->device_status.status_code);
+}
+
+/* why is this not done in init? */
+int rmi_driver_f01_init(struct rmi_device *rmi_dev)
+{
+ struct rmi_driver_data *driver_data = rmi_get_driverdata(rmi_dev);
+ struct rmi_function_container *fc = driver_data->f01_container;
+ int error;
+
+ error = rmi_f01_alloc_memory(fc, driver_data->num_of_irq_regs);
+ if (error < 0)
+ goto error_exit;
+
+ error = rmi_f01_initialize(fc);
+ if (error < 0)
+ goto error_exit;
+
+ error = rmi_f01_create_sysfs(fc);
+ if (error < 0)
+ goto error_exit;
+
+ return 0;
+
+ error_exit:
+ rmi_f01_free_memory(fc);
+
+ return error;
+}
+
+static int rmi_f01_alloc_memory(struct rmi_function_container *fc,
+ int num_of_irq_regs)
+{
+ struct f01_data *f01;
+
+ f01 = kzalloc(sizeof(struct f01_data), GFP_KERNEL);
+ if (!f01) {
+ dev_err(&fc->dev, "Failed to allocate fn_01_data.\n");
+ return -ENOMEM;
+ }
+
+ f01->device_control.interrupt_enable =
+ kzalloc(sizeof(u8)*(num_of_irq_regs), GFP_KERNEL);
+ if (!f01->device_control.interrupt_enable) {
+ kfree(f01);
+ return -ENOMEM;
+ }
+ fc->data = f01;
+
+ return 0;
+}
+
+static void rmi_f01_free_memory(struct rmi_function_container *fc)
+{
+ struct f01_data *f01 = fc->data;
+ kfree(f01->device_control.interrupt_enable);
+ kfree(fc->data);
+ fc->data = NULL;
+}
+
+static int rmi_f01_initialize(struct rmi_function_container *fc)
+{
+ u8 temp;
+ int retval;
+ u16 ctrl_base_addr;
+ struct rmi_device *rmi_dev = fc->rmi_dev;
+ struct rmi_driver_data *driver_data = rmi_get_driverdata(rmi_dev);
+ struct f01_data *data = fc->data;
+ struct rmi_device_platform_data *pdata = to_rmi_platform_data(rmi_dev);
+
+ /* Set the configured bit and (optionally) other important stuff
+ * in the device control register. */
+ ctrl_base_addr = fc->fd.control_base_addr;
+ retval = rmi_read_block(rmi_dev, fc->fd.control_base_addr,
+ data->device_control.ctrl0.regs,
+ ARRAY_SIZE(data->device_control.ctrl0.regs));
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to read F01 control.\n");
+ return retval;
+ }
+ switch (pdata->power_management.nosleep) {
+ case RMI_F01_NOSLEEP_DEFAULT:
+ break;
+ case RMI_F01_NOSLEEP_OFF:
+ data->device_control.ctrl0.nosleep = 0;
+ break;
+ case RMI_F01_NOSLEEP_ON:
+ data->device_control.ctrl0.nosleep = 1;
+ break;
+ }
+ /* Sleep mode might be set as a hangover from a system crash or
+ * reboot without power cycle. If so, clear it so the sensor
+ * is certain to function.
+ */
+ if (data->device_control.ctrl0.sleep_mode != RMI_SLEEP_MODE_NORMAL) {
+ dev_warn(&fc->dev,
+ "WARNING: Non-zero sleep mode found. Clearing...\n");
+ data->device_control.ctrl0.sleep_mode = RMI_SLEEP_MODE_NORMAL;
+ }
+
+ data->device_control.ctrl0.configured = 1;
+ retval = rmi_write_block(rmi_dev, fc->fd.control_base_addr,
+ data->device_control.ctrl0.regs,
+ ARRAY_SIZE(data->device_control.ctrl0.regs));
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to write F01 control.\n");
+ return retval;
+ }
+
+ data->irq_count = driver_data->irq_count;
+ data->num_of_irq_regs = driver_data->num_of_irq_regs;
+ ctrl_base_addr += sizeof(union f01_device_control_0);
+
+ data->interrupt_enable_addr = ctrl_base_addr;
+ retval = rmi_read_block(rmi_dev, ctrl_base_addr,
+ data->device_control.interrupt_enable,
+ sizeof(u8) *(driver_data->num_of_irq_regs));
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to read F01 control interrupt enable register.\n");
+ goto error_exit;
+ }
+ ctrl_base_addr += driver_data->num_of_irq_regs;
+
+ /* dummy read in order to clear irqs */
+ retval = rmi_read(rmi_dev, fc->fd.data_base_addr + 1, &temp);
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to read Interrupt Status.\n");
+ return retval;
+ }
+
+ retval = rmi_read_block(rmi_dev, fc->fd.query_base_addr,
+ data->basic_queries.regs,
+ sizeof(data->basic_queries.regs));
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to read device query registers.\n");
+ return retval;
+ }
+
+ retval = rmi_read_block(rmi_dev,
+ fc->fd.query_base_addr + sizeof(data->basic_queries.regs),
+ data->product_id, RMI_PRODUCT_ID_LENGTH);
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to read product ID.\n");
+ return retval;
+ }
+ data->product_id[RMI_PRODUCT_ID_LENGTH] = '\0';
+ dev_info(&fc->dev, "found RMI device, manufacturer: %s, product: %s\n",
+ data->basic_queries.manufacturer_id == 1 ?
+ "synaptics" : "unknown",
+ data->product_id);
+
+ /* read control register */
+ if (data->basic_queries.has_adjustable_doze) {
+ data->doze_interval_addr = ctrl_base_addr;
+ ctrl_base_addr++;
+
+ if (pdata->power_management.doze_interval) {
+ data->device_control.doze_interval =
+ pdata->power_management.doze_interval;
+ retval = rmi_write(rmi_dev, data->doze_interval_addr,
+ data->device_control.doze_interval);
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to configure F01 doze interval register.\n");
+ goto error_exit;
+ }
+ } else {
+ retval = rmi_read(rmi_dev, data->doze_interval_addr,
+ &data->device_control.doze_interval);
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to read F01 doze interval register.\n");
+ goto error_exit;
+ }
+ }
+
+ data->wakeup_threshold_addr = ctrl_base_addr;
+ ctrl_base_addr++;
+
+ if (pdata->power_management.wakeup_threshold) {
+ data->device_control.wakeup_threshold =
+ pdata->power_management.wakeup_threshold;
+ retval = rmi_write(rmi_dev, data->wakeup_threshold_addr,
+ data->device_control.wakeup_threshold);
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to configure F01 wakeup threshold register.\n");
+ goto error_exit;
+ }
+ } else {
+ retval = rmi_read(rmi_dev, data->wakeup_threshold_addr,
+ &data->device_control.wakeup_threshold);
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to read F01 wakeup threshold register.\n");
+ goto error_exit;
+ }
+ }
+ }
+
+ if (data->basic_queries.has_adjustable_doze_holdoff) {
+ data->doze_holdoff_addr = ctrl_base_addr;
+ ctrl_base_addr++;
+
+ if (pdata->power_management.doze_holdoff) {
+ data->device_control.doze_holdoff =
+ pdata->power_management.doze_holdoff;
+ retval = rmi_write(rmi_dev, data->doze_holdoff_addr,
+ data->device_control.doze_holdoff);
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to configure F01 "
+ "doze holdoff register.\n");
+ goto error_exit;
+ }
+ } else {
+ retval = rmi_read(rmi_dev, data->doze_holdoff_addr,
+ &data->device_control.doze_holdoff);
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to read F01 doze"
+ " holdoff register.\n");
+ goto error_exit;
+ }
+ }
+ }
+
+ retval = rmi_read_block(rmi_dev, fc->fd.data_base_addr,
+ data->device_status.regs, ARRAY_SIZE(data->device_status.regs));
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to read device status.\n");
+ goto error_exit;
+ }
+
+ if (data->device_status.unconfigured) {
+ dev_err(&fc->dev,
+ "Device reset during configuration process, status: "
+ "%#02x!\n", data->device_status.status_code);
+ retval = -EINVAL;
+ goto error_exit;
+ }
+
+ return retval;
+
+ error_exit:
+ kfree(data);
+ return retval;
+}
+
+static int rmi_f01_create_sysfs(struct rmi_function_container *fc)
+{
+ int attr_count = 0;
+ int retval = 0;
+ struct f01_data *data = fc->data;
+
+ dev_dbg(&fc->dev, "Creating sysfs files.");
+ for (attr_count = 0; attr_count < ARRAY_SIZE(fn_01_attrs);
+ attr_count++) {
+ if (!strcmp("doze_interval", fn_01_attrs[attr_count].attr.name)
+ && !data->basic_queries.has_lts) {
+ continue;
+ }
+ if (!strcmp("wakeup_threshold",
+ fn_01_attrs[attr_count].attr.name)
+ && !data->basic_queries.has_adjustable_doze) {
+ continue;
+ }
+ if (!strcmp("doze_holdoff", fn_01_attrs[attr_count].attr.name)
+ && !data->basic_queries.has_adjustable_doze_holdoff) {
+ continue;
+ }
+ retval = sysfs_create_file(&fc->dev.kobj,
+ &fn_01_attrs[attr_count].attr);
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to create sysfs file for %s.",
+ fn_01_attrs[attr_count].attr.name);
+ goto err_remove_sysfs;
+ }
+ }
+
+ return 0;
+
+err_remove_sysfs:
+ for (attr_count--; attr_count >= 0; attr_count--)
+ sysfs_remove_file(&fc->dev.kobj,
+ &fn_01_attrs[attr_count].attr);
+
+ return retval;
+}
+
+static int rmi_f01_config(struct rmi_function_container *fc)
+{
+ struct f01_data *data = fc->data;
+ int retval;
+
+ retval = rmi_write_block(fc->rmi_dev, fc->fd.control_base_addr,
+ data->device_control.ctrl0.regs,
+ ARRAY_SIZE(data->device_control.ctrl0.regs));
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to write device_control.reg.\n");
+ return retval;
+ }
+
+ retval = rmi_write_block(fc->rmi_dev, data->interrupt_enable_addr,
+ data->device_control.interrupt_enable,
+ sizeof(u8)*(data->num_of_irq_regs));
+
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to write interrupt enable.\n");
+ return retval;
+ }
+ if (data->basic_queries.has_lts) {
+ retval = rmi_write_block(fc->rmi_dev, data->doze_interval_addr,
+ &data->device_control.doze_interval,
+ sizeof(u8));
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to write doze interval.\n");
+ return retval;
+ }
+ }
+
+ if (data->basic_queries.has_adjustable_doze) {
+ retval = rmi_write_block(
+ fc->rmi_dev, data->wakeup_threshold_addr,
+ &data->device_control.wakeup_threshold,
+ sizeof(u8));
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to write wakeup threshold.\n");
+ return retval;
+ }
+ }
+
+ if (data->basic_queries.has_adjustable_doze_holdoff) {
+ retval = rmi_write_block(fc->rmi_dev, data->doze_holdoff_addr,
+ &data->device_control.doze_holdoff,
+ sizeof(u8));
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to write doze holdoff.\n");
+ return retval;
+ }
+ }
+ return 0;
+}
+
+static int rmi_f01_reset(struct rmi_function_container *fc)
+{
+ /*do nothing here */
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+static int rmi_f01_suspend(struct rmi_function_container *fc)
+{
+ struct rmi_device *rmi_dev = fc->rmi_dev;
+ struct rmi_driver_data *driver_data = rmi_get_driverdata(rmi_dev);
+ struct f01_data *data = driver_data->f01_container->data;
+ int retval = 0;
+
+ if (data->suspended)
+ return 0;
+
+ data->old_nosleep = data->device_control.ctrl0.nosleep;
+ data->device_control.ctrl0.nosleep = 0;
+ data->device_control.ctrl0.sleep_mode = RMI_SLEEP_MODE_SENSOR_SLEEP;
+
+ retval = rmi_write_block(rmi_dev,
+ driver_data->f01_container->fd.control_base_addr,
+ data->device_control.ctrl0.regs,
+ ARRAY_SIZE(data->device_control.ctrl0.regs));
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to write sleep mode. Code: %d.\n",
+ retval);
+ data->device_control.ctrl0.nosleep = data->old_nosleep;
+ data->device_control.ctrl0.sleep_mode = RMI_SLEEP_MODE_NORMAL;
+ } else {
+ data->suspended = true;
+ retval = 0;
+ }
+
+ return retval;
+}
+
+static int rmi_f01_resume(struct rmi_function_container *fc)
+{
+ struct rmi_device *rmi_dev = fc->rmi_dev;
+ struct rmi_driver_data *driver_data = rmi_get_driverdata(rmi_dev);
+ struct f01_data *data = driver_data->f01_container->data;
+ int retval = 0;
+
+ if (!data->suspended)
+ return 0;
+
+ data->device_control.ctrl0.nosleep = data->old_nosleep;
+ data->device_control.ctrl0.sleep_mode = RMI_SLEEP_MODE_NORMAL;
+
+ retval = rmi_write_block(rmi_dev,
+ driver_data->f01_container->fd.control_base_addr,
+ data->device_control.ctrl0.regs,
+ ARRAY_SIZE(data->device_control.ctrl0.regs));
+ if (retval < 0)
+ dev_err(&fc->dev,
+ "Failed to restore normal operation. Code: %d.\n",
+ retval);
+ else {
+ data->suspended = false;
+ retval = 0;
+ }
+
+ return retval;
+}
+#endif /* CONFIG_PM */
+
+static int rmi_f01_init(struct rmi_function_container *fc)
+{
+ return 0;
+}
+
+static void rmi_f01_remove(struct rmi_function_container *fc)
+{
+ int attr_count;
+
+ for (attr_count = 0; attr_count < ARRAY_SIZE(fn_01_attrs);
+ attr_count++) {
+ sysfs_remove_file(&fc->dev.kobj, &fn_01_attrs[attr_count].attr);
+ }
+
+ rmi_f01_free_memory(fc);
+}
+
+static int rmi_f01_attention(struct rmi_function_container *fc, u8 *irq_bits)
+{
+ struct rmi_device *rmi_dev = fc->rmi_dev;
+ struct f01_data *data = fc->data;
+ int retval;
+
+ retval = rmi_read_block(rmi_dev, fc->fd.data_base_addr,
+ data->device_status.regs, ARRAY_SIZE(data->device_status.regs));
+ if (retval < 0) {
+ dev_err(&fc->dev, "Failed to read device status, code: %d.\n",
+ retval);
+ return retval;
+ }
+ if (data->device_status.unconfigured) {
+ dev_warn(&fc->dev, "Device reset detected.\n");
+ retval = rmi_dev->driver->reset_handler(rmi_dev);
+ if (retval < 0)
+ return retval;
+ }
+ return 0;
+}
+
+static struct rmi_function_handler function_handler = {
+ .func = 0x01,
+ .init = rmi_f01_init,
+ .config = rmi_f01_config,
+ .reset = rmi_f01_reset,
+ .attention = rmi_f01_attention,
+
+#ifdef CONFIG_PM
+#if defined(CONFIG_HAS_EARLYSUSPEND) && \
+ !defined(CONFIG_RMI4_SPECIAL_EARLYSUSPEND)
+ .early_suspend = rmi_f01_suspend,
+ .late_resume = rmi_f01_resume,
+#else
+ .suspend = rmi_f01_suspend,
+ .resume = rmi_f01_resume,
+#endif /* defined(CONFIG_HAS_EARLYSUSPEND) && !def... */
+#endif /* CONFIG_PM */
+ .remove = rmi_f01_remove,
+};
+
+static int __init rmi_f01_module_init(void)
+{
+ int error;
+
+ error = rmi_register_function_driver(&function_handler);
+ if (error < 0) {
+ pr_err("%s: register failed!\n", __func__);
+ return error;
+ }
+
+ return 0;
+}
+
+static void __exit rmi_f01_module_exit(void)
+{
+ rmi_unregister_function_driver(&function_handler);
+}
+
+module_init(rmi_f01_module_init);
+module_exit(rmi_f01_module_exit);
+
+MODULE_AUTHOR("Christopher Heiny <cheiny@synaptics.com>");
+MODULE_DESCRIPTION("RMI F01 module");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(RMI_DRIVER_VERSION);
diff --git a/drivers/input/rmi4/rmi_f01.h b/drivers/input/rmi4/rmi_f01.h
new file mode 100644
index 0000000..8965c6f
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f01.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (c) 2012 Synaptics Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef _RMI_F01_H
+#define _RMI_F01_H
+
+#define RMI_PRODUCT_ID_LENGTH 10
+
+union f01_basic_queries {
+ struct {
+ u8 manufacturer_id:8;
+
+ u8 custom_map:1;
+ u8 non_compliant:1;
+ u8 has_lts:1;
+ u8 has_sensor_id:1;
+ u8 has_charger_input:1;
+ u8 has_adjustable_doze:1;
+ u8 has_adjustable_doze_holdoff:1;
+ u8 has_product_properties_2:1;
+
+ u8 productinfo_1:7;
+ u8 q2_bit_7:1;
+ u8 productinfo_2:7;
+ u8 q3_bit_7:1;
+
+ u8 year:5;
+ u8 month:4;
+ u8 day:5;
+ u8 cp1:1;
+ u8 cp2:1;
+ u8 wafer_id1_lsb:8;
+ u8 wafer_id1_msb:8;
+ u8 wafer_id2_lsb:8;
+ u8 wafer_id2_msb:8;
+ u8 wafer_id3_lsb:8;
+ };
+ u8 regs[11];
+};
+
+union f01_device_status {
+ struct {
+ u8 status_code:4;
+ u8 reserved:2;
+ u8 flash_prog:1;
+ u8 unconfigured:1;
+ };
+ u8 regs[1];
+};
+
+/* control register bits */
+#define RMI_SLEEP_MODE_NORMAL (0x00)
+#define RMI_SLEEP_MODE_SENSOR_SLEEP (0x01)
+#define RMI_SLEEP_MODE_RESERVED0 (0x02)
+#define RMI_SLEEP_MODE_RESERVED1 (0x03)
+
+#define RMI_IS_VALID_SLEEPMODE(mode) \
+ (mode >= RMI_SLEEP_MODE_NORMAL && mode <= RMI_SLEEP_MODE_RESERVED1)
+
+union f01_device_control_0 {
+ struct {
+ u8 sleep_mode:2;
+ u8 nosleep:1;
+ u8 reserved:2;
+ u8 charger_input:1;
+ u8 report_rate:1;
+ u8 configured:1;
+ };
+ u8 regs[1];
+};
+
+#endif

\
 
 \ /
  Last update: 2012-08-18 02:41    [W:0.572 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site