lkml.org 
[lkml]   [2012]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 4/17] input: RMI4 configs and makefiles
Date
Signed-off-by: Christopher Heiny <cheiny@synaptics.com>

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Cc: Joeri de Gram <j.de.gram@gmail.com>

Acked-by: Jean Delvare <khali@linux-fr.org>

---

drivers/input/Kconfig | 2 +
drivers/input/Makefile | 4 +-
drivers/input/rmi4/Kconfig | 262 +++++++++++++++++++++++++++++++++++++++++++
drivers/input/rmi4/Makefile | 18 +++
4 files changed, 284 insertions(+), 2 deletions(-)

diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 1903c0f..0cdd8a5 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -185,6 +185,8 @@ source "drivers/input/touchscreen/Kconfig"

source "drivers/input/misc/Kconfig"

+source "drivers/input/rmi4/Kconfig"
+
endif

menu "Hardware I/O ports"
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 09614ce..cfb383e 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -23,6 +23,6 @@ obj-$(CONFIG_INPUT_TABLET) += tablet/
obj-$(CONFIG_INPUT_TOUCHSCREEN) += touchscreen/
obj-$(CONFIG_INPUT_MISC) += misc/

-obj-$(CONFIG_INPUT_APMPOWER) += apm-power.o
+obj-$(CONFIG_INPUT_RMI4) += rmi4/

-obj-$(CONFIG_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
+obj-$(CONFIG_INPUT_APMPOWER) += apm-power.o
diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
new file mode 100644
index 0000000..3cedf8b
--- /dev/null
+++ b/drivers/input/rmi4/Kconfig
@@ -0,0 +1,262 @@
+#
+# RMI4 configuration
+#
+config RMI4_BUS
+ bool "Synaptics RMI4 bus support"
+ help
+ Say Y here if you want to support the Synaptics RMI4 bus. This is
+ required for all RMI4 device support.
+
+ If unsure, say Y.
+
+ This feature is not currently available as a loadable module.
+
+config RMI4_DEBUG
+ bool "RMI4 Debugging"
+ depends on RMI4_BUS
+ help
+ Say Y here to enable debug feature in the RMI4 driver.
+
+ Note that the RMI4 driver debug features can generate a lot of
+ output (potentially clogging up your dmesg output) and generally
+ slow down driver operation. It's recommended to enable them only
+ if you are actively developing/debugging RMI4 features.
+
+ If unsure, say N.
+
+config RMI4_SPECIAL_EARLYSUSPEND
+ bool "Synaptics RMI4 special early suspend"
+ depends on RMI4_BUS && HAS_EARLYSUSPEND
+ help
+ Say Y here to enable special suspend handling in the RMI4 driver.
+
+ This feature causes the RMI4 sensors to be placed in full suspend
+ state during the early suspend process. The standard early suspend
+ and late resume handlers will be replaced by the suspend and resume
+ handling routines. The result will be a small savings in power
+ consumption, at the expense of decreased UI responsiveness at late
+ resume. Enable this feature only if you have extremely limited
+ power resources in your system.
+
+ If unsure, say N.
+
+config RMI4_FWLIB
+ bool "RMI4 Firmware Update"
+ depends on RMI4_BUS
+ help
+ Say Y here to enable in-kernel firmware update capability.
+
+ The RMI4 driver will check for firmware updates during the device
+ initialization process, and apply the updates if appropriate.
+
+ This feature is not available as a loadable module.
+
+
+config RMI4_I2C
+ bool "RMI4 I2C Support"
+ depends on RMI4_BUS && I2C
+ help
+ Say Y here if you want to support RMI4 devices connected to an I2C
+ bus.
+
+ If unsure, say Y.
+
+ This feature is not currently available as a loadable module.
+
+config RMI4_SPI
+ bool "RMI4 SPI Support"
+ depends on RMI4_BUS && SPI
+ help
+ Say Y here if you want to support RMI4 devices connected to an SPI
+ bus.
+
+ If unsure, say Y.
+
+ This feature is not currently available as a loadable module.
+
+config RMI4_SMB
+ bool "RMI4 SMB Support"
+ depends on RMI4_BUS
+ help
+ Say Y here if you want to support RMI4 devices connected to an SMB
+ bus.
+
+ If unsure, say Y.
+
+ This feature is not currently available as a loadable module.
+
+config RMI4_GENERIC
+ bool "RMI4 Generic driver"
+ depends on RMI4_BUS
+ help
+ Say Y here if you want to support generic RMI4 devices.
+
+ This is pretty much required if you want to do anything useful with
+ your RMI device.
+
+ This feature is not currently available as a loadable module.
+
+
+config RMI4_F1A
+ tristate "RMI4 Function 1A (capacitive button sensor)"
+ depends on RMI4_BUS && RMI4_GENERIC
+ help
+ Say Y here if you want to add support for RMI4 function 1A.
+
+ Function 1A provides self testing for touchscreens and touchpads.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rmi-f1a.
+
+config RMI4_F09
+ tristate "RMI4 Function 09 (self testing)"
+ depends on RMI4_BUS && RMI4_GENERIC
+ help
+ Say Y here if you want to add support for RMI4 function 09.
+
+ Function 09 provides self testing for touchscreens and touchpads.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rmi-f09.
+
+config RMI4_F11
+ tristate "RMI4 Function 11 (2D pointing)"
+ depends on RMI4_BUS && RMI4_GENERIC
+ help
+ Say Y here if you want to add support for RMI4 function 11.
+
+ Function 11 provides 2D multifinger pointing for touchscreens and
+ touchpads. For sensors that support relative pointing, F11 also
+ provides mouse input.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rmi-f11.
+
+config RMI4_F11_PEN
+ bool "RMI4 F11 Pen Support"
+ depends on RMI4_F11
+ help
+ Say Y here to add support for pen input to RMI4 function 11.
+
+ If this feature is enabled, when pen inputs are detected they
+ will be reported to the input stream as MT_TOOL_PEN. Otherwise,
+ pens will be treated the same as fingers.
+
+ Not all UI implementations deal gracefully with pen discrimination.
+ If your system is not recognizing pen touches and you know your
+ sensor supports pen input, you probably want to turn this feature
+ off.
+
+config RMI4_F11_TYPEB
+ bool "RMI4 F11 Type B Support"
+ depends on RMI4_F11
+ help
+ Say Y here to add support for Type B multi-touch.
+
+ If this feature is enabled, the driver will support type B multi-
+ touch input.
+
+ See Documentation/input/multi-touch-protocol for details.
+
+config RMI4_VIRTUAL_BUTTON
+ tristate "RMI4 Vitual Button"
+ depends on RMI4_F11
+ help
+ Say Y here if you want to add support for RMI4 virtual button to F11.
+
+ The virtual button feature implement the virtual button device in
+ certain RMI4 touch sensors.
+
+ This works only if your sensor supports F11 gestures.
+
+config RMI4_F17
+ tristate "RMI4 Function 17 (pointing sticks)"
+ depends on RMI4_BUS && RMI4_GENERIC
+ help
+ Say Y here if you want to add support for RMI4 function 17.
+
+ Function 19 provides support for capacitive and resistive
+ pointing sticks.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rmi-f17.
+
+config RMI4_F19
+ tristate "RMI4 Function 19 (0D pointing)"
+ depends on RMI4_BUS && RMI4_GENERIC
+ help
+ Say Y here if you want to add support for RMI4 function 19.
+
+ Function 19 provides support for capacitive buttons for sensors
+ that implement capacitive buttons.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rmi-f19.
+
+config RMI4_F21
+ tristate "RMI4 Function 21 (2D Force)"
+ depends on RMI4_BUS && RMI4_GENERIC
+ help
+ Say Y here if you want to add support for RMI4 function 21.
+
+ Function 21 provides 2D Force Sensing for ForcePad products.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rmi-f21.
+
+config RMI4_F30
+ tristate "RMI4 Function 30 (GPIO LED)"
+ depends on RMI4_BUS && RMI4_GENERIC
+ help
+ Say Y here if you want to add support for RMI4 function 30.
+
+ Function 30 provides GPIO LED support for sensors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rmi-f30.
+
+config RMI4_F34
+ tristate "RMI4 Function 34 (device reflash)"
+ depends on RMI4_BUS && RMI4_GENERIC
+ help
+ Say Y here if you want to add support for RMI4 function 34.
+
+ Function 34 provides firmware upgrade capability for your sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rmi-f34.
+
+config RMI4_F41
+ tristate "RMI4 Function 41 (active pen)"
+ depends on RMI4_BUS && RMI4_GENERIC
+ help
+ Say Y here if you want to add support for RMI4 function 41.
+
+ Function 41 provides active pen support for active pen enabled sensors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rmi-f41.
+
+config RMI4_F54
+ tristate "RMI4 Function 54 (analog diagnostics)"
+ depends on RMI4_BUS && RMI4_GENERIC
+ help
+ Say Y here if you want to add support for RMI4 function 54.
+
+ Function 54 provides access to various diagnostic features in
+ certain RMI4 touch sensors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rmi-f54.
+
+config RMI4_DEV
+ tristate "Synaptics direct RMI device support (rmidev)"
+ depends on GPIO_SYSFS && (RMI4_I2C || RMI4_SPI)
+ help
+ Say Y here to add support for rmidev.
+
+ The rmidev feature implements a character device providing access
+ to RMI4 sensor register maps.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rmi-dev.
diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
new file mode 100644
index 0000000..4a14a21
--- /dev/null
+++ b/drivers/input/rmi4/Makefile
@@ -0,0 +1,18 @@
+obj-$(CONFIG_RMI4_BUS) += rmi_bus.o
+obj-$(CONFIG_RMI4_I2C) += rmi_i2c.o
+obj-$(CONFIG_RMI4_SPI) += rmi_spi.o
+obj-$(CONFIG_RMI4_SMB) += rmi_smbus.o
+obj-$(CONFIG_RMI4_GENERIC) += rmi_driver.o rmi_f01.o
+obj-$(CONFIG_RMI4_FWLIB) += rmi_fw_update.o
+obj-$(CONFIG_RMI4_F09) += rmi_f09.o
+obj-$(CONFIG_RMI4_F1A) += rmi_f1a.o
+obj-$(CONFIG_RMI4_F11) += rmi_f11.o
+obj-$(CONFIG_RMI4_F17) += rmi_f17.o
+obj-$(CONFIG_RMI4_F19) += rmi_f19.o
+obj-$(CONFIG_RMI4_F21) += rmi_f21.o
+obj-$(CONFIG_RMI4_F30) += rmi_f30.o
+obj-$(CONFIG_RMI4_F34) += rmi_f34.o
+obj-$(CONFIG_RMI4_F41) += rmi_f41.o
+obj-$(CONFIG_RMI4_F54) += rmi_f54.o
+obj-$(CONFIG_RMI4_DEV) += rmi_dev.o
+

\
 
 \ /
  Last update: 2012-08-18 02:01    [W:0.188 / U:2.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site