lkml.org 
[lkml]   [2012]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 8/8] UBI: drop CONFIG_MTD_UBI_BEB_LIMIT
Date
This option can be set by a kernel parameter and an ioctl, so we may not
need the kernel config option any more.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
---
arch/arm/configs/sam9_l9260_defconfig | 1 -
drivers/mtd/ubi/Kconfig | 29 -----------------------------
drivers/mtd/ubi/build.c | 4 ++--
drivers/mtd/ubi/ubi.h | 3 +++
include/mtd/ubi-user.h | 2 +-
5 files changed, 6 insertions(+), 33 deletions(-)

diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index d11fea5..47dd71a 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -39,7 +39,6 @@ CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=30
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 56531a7..7a57cc0 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -27,35 +27,6 @@ config MTD_UBI_WL_THRESHOLD
life-cycle less than 10000, the threshold should be lessened (e.g.,
to 128 or 256, although it does not have to be power of 2).

-config MTD_UBI_BEB_LIMIT
- int "Maximum expected bad eraseblock count per 1024 eraseblocks"
- default 20
- range 2 256
- help
- This option specifies the maximum bad physical eraseblocks UBI
- expects on the MTD device (per 1024 eraseblocks). If the underlying
- flash does not admit of bad eraseblocks (e.g. NOR flash), this value
- is ignored.
-
- NAND datasheets often specify the minimum and maximum NVM (Number of
- Valid Blocks) for the flashes' endurance lifetime. The maximum
- expected bad eraseblocks per 1024 eraseblocks then can be calculated
- as "1024 * (1 - MinNVB / MaxNVB)", which gives 20 for most NANDs
- (MaxNVB is basically the total count of eraseblocks on the chip).
-
- To put it differently, if this value is 20, UBI will try to reserve
- about 1.9% of physical eraseblocks for bad blocks handling. And that
- will be 1.9% of eraseblocks on the entire NAND chip, not just the MTD
- partition UBI attaches. This means that if you have, say, a NAND
- flash chip admits maximum 40 bad eraseblocks, and it is split on two
- MTD partitions of the same size, UBI will reserve 40 eraseblocks when
- attaching a partition.
-
- This option can be overridden by the kernel parameter ubi.mtd and the
- ioctl UBI_IOCATT.
-
- Leave the default value if unsure.
-
config MTD_UBI_GLUEBI
tristate "MTD devices emulation driver (gluebi)"
help
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index cc05022..d940a12 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -865,7 +865,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
* behavior between ubiattach command and module parameter
*/
if (!max_beb_per1024)
- max_beb_per1024 = CONFIG_MTD_UBI_BEB_LIMIT;
+ max_beb_per1024 = MTD_UBI_DEFAULT_BEB_LIMIT;

/*
* Check if we already have the same MTD device attached.
@@ -1411,7 +1411,7 @@ MODULE_PARM_DESC(mtd, "MTD devices to attach. Parameter format: mtd=<name|num|pa
"MTD devices may be specified by their number, name, or path to the MTD character device node.\n"
"Optional \"vid_hdr_offs\" parameter specifies UBI VID header position to be used by UBI. (default value if 0 or not set)\n"
"Optional \"max_beb_per1024\" parameter specifies the maximum expected bad eraseblock per 1024 eraseblocks. (default value ("
- __stringify(CONFIG_MTD_UBI_BEB_LIMIT) ") if 0 or not set)\n"
+ __stringify(MTD_UBI_DEFAULT_BEB_LIMIT) ") if 0 or not set)\n"
"\n"
"Example 1: mtd=/dev/mtd0 - attach MTD device /dev/mtd0.\n"
"Example 2: mtd=content,1984 mtd=4 - attach MTD device with name \"content\" using VID header offset 1984, and MTD device number 4 with default VID header offset.\n"
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 2a2475b..2148f35 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -50,6 +50,9 @@
/* UBI name used for character devices, sysfs, etc */
#define UBI_NAME_STR "ubi"

+/* Default number of maximum expected bad blocks per 1024 eraseblocks */
+#define MTD_UBI_DEFAULT_BEB_LIMIT 20
+
/* Normal UBI messages */
#define ubi_msg(fmt, ...) printk(KERN_NOTICE "UBI: " fmt "\n", ##__VA_ARGS__)
/* UBI warning messages */
diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h
index 8168d9b..0b25f4c 100644
--- a/include/mtd/ubi-user.h
+++ b/include/mtd/ubi-user.h
@@ -260,7 +260,7 @@ enum {
* any physical eraseblocks for new bad eraseblocks, but attempts to use
* available eraseblocks (if any).
* The accepted range is 0-255. If 0 is given, the default kernel config value
- * CONFIG_MTD_UBI_BEB_LIMIT will be used for compatibility.
+ * MTD_UBI_DEFAULT_BEB_LIMIT will be used for compatibility.
*/
struct ubi_attach_req {
__s32 ubi_num;
--
1.7.2.5


\
 
 \ /
  Last update: 2012-08-17 19:01    [W:1.452 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site