lkml.org 
[lkml]   [2012]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V6 10/15] MIPS: Loongson: Add Loongson-3 Kconfig options
Date
Added Kconfig options include: Loongson-3 CPU and machine definition,
CPU cache features, UEFI-like firmware interface, HT-linked PCI, and
big memory support.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Hongliang Tao <taohl@lemote.com>
Signed-off-by: Hua Yan <yanh@lemote.com>
---
arch/mips/Kconfig | 26 ++++++++++++++++++++++
arch/mips/loongson/Kconfig | 52 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 78 insertions(+), 0 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 331d574..0660068 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1571,6 +1571,16 @@ config CPU_LOONGSON2
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM

+config CPU_LOONGSON3
+ bool "Loongson 3 CPU"
+ depends on SYS_HAS_CPU_LOONGSON3
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ help
+ The Loongson 3 processor implements the MIPS III instruction set
+ with many extensions.
+
config CPU_LOONGSON1
bool
select CPU_MIPS32
@@ -1597,6 +1607,11 @@ config SYS_HAS_CPU_LOONGSON2F
select CPU_SUPPORTS_ADDRWINCFG if 64BIT
select CPU_SUPPORTS_UNCACHED_ACCELERATED

+config SYS_HAS_CPU_LOONGSON3
+ bool
+ select CPU_SUPPORTS_CPUFREQ
+ select CPU_SUPPORTS_COHERENT_CACHE
+
config SYS_HAS_CPU_LOONGSON1B
bool

@@ -1734,6 +1749,8 @@ config CPU_SUPPORTS_HUGEPAGES
bool
config CPU_SUPPORTS_UNCACHED_ACCELERATED
bool
+config CPU_SUPPORTS_COHERENT_CACHE
+ bool
config MIPS_PGD_C0_CONTEXT
bool
default y if 64BIT && CPU_MIPSR2
@@ -2399,6 +2416,15 @@ config PCI
your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
say Y, otherwise N.

+config HT_PCI
+ bool "Support for HT-linked PCI"
+ select PCI_DOMAINS
+ help
+ Loongson family machines use Hyper-Transport bus for inter-core
+ connection and device connection. The PCI bus is a subordinate
+ linked at HT. Choose Y unless you are using Loongson 2E/2F based
+ machines.
+
config PCI_DOMAINS
bool

diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 263beb9..dd951b8 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -59,6 +59,33 @@ config LEMOTE_MACH2F

These family machines include fuloong2f mini PC, yeeloong2f notebook,
LingLoong allinone PC and so forth.
+
+config LEMOTE_MACH3A
+ bool "Lemote Loongson 3A family machines"
+ select ARCH_SPARSEMEM_ENABLE
+ select GENERIC_ISA_DMA_SUPPORT_BROKEN
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select BOOT_ELF32
+ select BOARD_SCACHE
+ select CSRC_R4K
+ select CEVT_R4K
+ select CPU_HAS_WB
+ select HW_HAS_PCI
+ select ISA
+ select I8259
+ select IRQ_CPU
+ select SYS_HAS_CPU_LOONGSON3
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select LOONGSON_MC146818
+ select UEFI_FIRMWARE_INTERFACE
+ help
+ Lemote Loongson 3A family machines utilize the 3A revision of
+ Loongson processor and RS780/SBX00 chipset.
endchoice

config CS5536
@@ -86,8 +113,33 @@ config LOONGSON_UART_BASE
default y
depends on EARLY_PRINTK || SERIAL_8250

+config LOONGSON_BIGMEM
+ bool "Soft IOMMU Support for Big Memory (>4GB)"
+ depends on CPU_LOONGSON3
+ select SWIOTLB
+ select ZONE_DMA32
+
+config IOMMU_HELPER
+ bool
+
+config NEED_SG_DMA_LENGTH
+ bool
+
+config SWIOTLB
+ bool
+ select IOMMU_HELPER
+ select NEED_SG_DMA_LENGTH
+ select NEED_DMA_MAP_STATE
+
config LOONGSON_MC146818
bool
default n

+config ARCH_SPARSEMEM_ENABLE
+ bool
+ select SPARSEMEM_STATIC
+
+config UEFI_FIRMWARE_INTERFACE
+ bool
+
endif # MACH_LOONGSON
--
1.7.7.3


\
 
 \ /
  Last update: 2012-08-17 11:21    [W:0.112 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site