lkml.org 
[lkml]   [2012]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Infinite looping in omap2430.c USB driver
On Tue, Aug 14, 2012 at 07:46:59AM +1000, NeilBrown wrote:
> On Mon, 13 Aug 2012 17:32:34 +0300 Felipe Balbi <balbi@ti.com> wrote:
>
> > Hi,
> >
> > On Mon, Aug 13, 2012 at 12:34:53PM +1000, NeilBrown wrote:
> > > On Thu, 9 Aug 2012 14:15:51 +0300 Felipe Balbi <balbi@ti.com> wrote:
> > >
> > >
> > > > hehe, that's nasty. Please send a patch converting to a try count and a
> > > > udelay_range(), or something.
> > > >
> > >
> > > how's this?
> > >
> > > Thanks,
> > > NeilBrown
> > >
> > >
> > > From: NeilBrown <neilb@suse.de>
> > > Date: Mon, 13 Aug 2012 12:32:58 +1000
> > > Subject: [PATCH] omap2430: don't loop indefinitely in interrupt.
> > >
> > > When called during resume_irqs, omap2430_musb_set_vbus() is run with
> > > interrupts disabled, In that case 'jiffies' never changes so the loop
> > > can loop forever.
> > >
> > > So impose a maximum loop count and add an 'mdelay' to ensure we wait
> > > a reasonable amount of time for bit to be cleared.
> > >
> > > This fixes a hang on resume.
> > >
> > > Signed-of-by: NeilBrown <neilb@suse.de>
> > >
> > > diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
> > > index c7785e8..8a93381 100644
> > > --- a/drivers/usb/musb/omap2430.c
> > > +++ b/drivers/usb/musb/omap2430.c
> > > @@ -34,6 +34,7 @@
> > > #include <linux/dma-mapping.h>
> > > #include <linux/pm_runtime.h>
> > > #include <linux/err.h>
> > > +#include <linux/delay.h>
> > >
> > > #include "musb_core.h"
> > > #include "omap2430.h"
> > > @@ -145,6 +146,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
> > >
> > > if (is_on) {
> > > if (musb->xceiv->state == OTG_STATE_A_IDLE) {
> > > + int loops = 100;
> > > /* start the session */
> > > devctl |= MUSB_DEVCTL_SESSION;
> > > musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
> > > @@ -154,9 +156,11 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
> > > */
> > > while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
> > >
> > > + mdelay(5);
> >
> > I would prefer udelay_range() as it will let scheduler group timers.
> > Something like:
> >
> > udelay_range(3000, 5000);
> >
> > should do, I gues...
> >
>
> Except that there is no udelay_range :-(
> There is a usleep_range, but that can only be used from non-atomic context
> and in the problem case interrupts are disabled and a spinlock is held so we

my bad. Got confused. I will apply the original patch then. Thanks.

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2012-08-14 10:42    [W:0.735 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site