lkml.org 
[lkml]   [2012]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support
On 08/13/2012 12:05 PM, Sourav Poddar wrote:
> Add tmp102 temperature sensor data in omap5 evm dts file.
>
> Tested on omap5430 evm with 3.5 custom kernel.
>
> Cc: Benoit Cousson <b-cousson@ti.com>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Acked-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
> ---
> arch/arm/boot/dts/omap5-evm.dts | 9 +++++++++
> 1 files changed, 9 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
> index 200c39a..45a8aeb 100644
> --- a/arch/arm/boot/dts/omap5-evm.dts
> +++ b/arch/arm/boot/dts/omap5-evm.dts
> @@ -18,3 +18,12 @@
> reg = <0x80000000 0x40000000>; /* 1 GB */
> };
> };
> +
> +&i2c4 {
> + clock-frequency = <400000>;

Have you checked if we cannot run at faster speed? Reducing the speed
will impact every devices on the bus.
It might be needed, I just wanted to be sure.

You should maybe just add a small comment to explain what the device is
doing with potentially a link to the HW spec if available.

The same comments are applicable to the bmp085 patch.

Regards,
Benoit



\
 
 \ /
  Last update: 2012-08-14 12:42    [W:0.088 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site