lkml.org 
[lkml]   [2012]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mfd: tps65910: remove warning during dt node parsing
Date
Driver throw the warning message if dt node does not
have the info for VMBCH-Threshold and VMBCH2-Threshold.
These properties are optional property and hence it
is not mandatory to have these on DT node and in this case
it should not throw the warning message.
It creates noise from driver as follows:
[ 0.384605] tps65910 4-002d: VMBCH-Threshold not specified
[ 0.384616] tps65910 4-002d: VMBCH2-Threshold not specified

Removing the warning message from driver.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
drivers/mfd/tps65910.c | 4 ----
1 files changed, 0 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 1c56379..64514b0 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -184,14 +184,10 @@ static struct tps65910_board *tps65910_parse_dt(struct i2c_client *client,
ret = of_property_read_u32(np, "ti,vmbch-threshold", &prop);
if (!ret)
board_info->vmbch_threshold = prop;
- else if (*chip_id == TPS65911)
- dev_warn(&client->dev, "VMBCH-Threshold not specified");

ret = of_property_read_u32(np, "ti,vmbch2-threshold", &prop);
if (!ret)
board_info->vmbch2_threshold = prop;
- else if (*chip_id == TPS65911)
- dev_warn(&client->dev, "VMBCH2-Threshold not specified");

prop = of_property_read_bool(np, "ti,en-ck32k-xtal");
board_info->en_ck32k_xtal = prop;
--
1.7.1.1


\
 
 \ /
  Last update: 2012-08-13 15:43    [W:0.027 / U:1.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site