lkml.org 
[lkml]   [2012]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] leds-clevo-mail: add MODULE_DEVICE_TABLE
Date
Enable autoloading of leds-clevo-mail by using MODULE_DEVICE_TABLE.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>

--- a/drivers/leds/leds-clevo-mail.c
+++ b/drivers/leds/leds-clevo-mail.c
@@ -31,7 +31,7 @@ static int __init clevo_mail_led_dmi_callback(const struct dmi_system_id *id)
}

/*
- * struct mail_led_whitelist - List of known good models
+ * struct clevo_mail_led_dmi_table - List of known good models
*
* Contains the known good models this driver is compatible with.
* When adding a new model try to be as strict as possible. This
@@ -39,7 +39,7 @@ static int __init clevo_mail_led_dmi_callback(const struct dmi_system_id *id)
* detected as working, but in reality it is not) as low as
* possible.
*/
-static struct dmi_system_id __initdata mail_led_whitelist[] = {
+static struct dmi_system_id __initdata clevo_mail_led_dmi_table[] = {
{
.callback = clevo_mail_led_dmi_callback,
.ident = "Clevo D410J",
@@ -89,6 +89,7 @@ static struct dmi_system_id __initdata mail_led_whitelist[] = {
},
{ }
};
+MODULE_DEVICE_TABLE(dmi, clevo_mail_led_dmi_table);

static void clevo_mail_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
@@ -180,7 +181,7 @@ static int __init clevo_mail_led_init(void)

/* Check with the help of DMI if we are running on supported hardware */
if (!nodetect) {
- count = dmi_check_system(mail_led_whitelist);
+ count = dmi_check_system(clevo_mail_led_dmi_table);
} else {
count = 1;
printk(KERN_ERR KBUILD_MODNAME ": Skipping DMI detection. "



--
Ondrej Zary


\
 
 \ /
  Last update: 2012-08-01 23:41    [W:0.326 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site