lkml.org 
[lkml]   [2012]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 25/25] leds: convert One-shot LED trigger driver to devm_kzalloc() and cleanup error exit path
From
Date
On Wed, 2012-07-04 at 13:10 +0800, Bryan Wu wrote:
> Cc: Fabio Baltieri <fabio.baltieri@gmail.com>
> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
> ---
> drivers/leds/ledtrig-oneshot.c | 8 +++-----
> 1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/leds/ledtrig-oneshot.c b/drivers/leds/ledtrig-oneshot.c
> index 2c029aa..6395a38 100644
> --- a/drivers/leds/ledtrig-oneshot.c
> +++ b/drivers/leds/ledtrig-oneshot.c
> @@ -127,7 +127,8 @@ static void oneshot_trig_activate(struct led_classdev *led_cdev)
> struct oneshot_trig_data *oneshot_data;
> int rc;
>
> - oneshot_data = kzalloc(sizeof(*oneshot_data), GFP_KERNEL);
> + oneshot_data = devm_kzalloc(led_cdev->dev, sizeof(*oneshot_data),
> + GFP_KERNEL);
> if (!oneshot_data)
> return;
>
> @@ -135,7 +136,7 @@ static void oneshot_trig_activate(struct led_classdev *led_cdev)
>
> rc = device_create_file(led_cdev->dev, &dev_attr_delay_on);
> if (rc)
> - goto err_out_trig_data;
> + return;
> rc = device_create_file(led_cdev->dev, &dev_attr_delay_off);
> if (rc)
> goto err_out_delayon;
> @@ -159,8 +160,6 @@ err_out_delayoff:
> device_remove_file(led_cdev->dev, &dev_attr_delay_off);
> err_out_delayon:
> device_remove_file(led_cdev->dev, &dev_attr_delay_on);
> -err_out_trig_data:
> - kfree(led_cdev->trigger_data);
> }
>
> static void oneshot_trig_deactivate(struct led_classdev *led_cdev)
> @@ -172,7 +171,6 @@ static void oneshot_trig_deactivate(struct led_classdev *led_cdev)
> device_remove_file(led_cdev->dev, &dev_attr_delay_off);
> device_remove_file(led_cdev->dev, &dev_attr_invert);
> device_remove_file(led_cdev->dev, &dev_attr_shot);
> - kfree(oneshot_data);
> led_cdev->activated = false;
> }
>
Bryan,

I don't believe memory triggers allocate in their activate routine
should be converted to devm_kzalloc(). Based on my understanding, the
memory allocated using devm_kzalloc() us free'ed when driver is
detached. In the case of led triggers, driver stays registered while the
triggers it supports can be activated and deactivated many times. By
converting these allocations into devm_kzalloc()s could lead to memory
leaks. Please correct me if my understanding is incorrect.

If what I am saying makes sense, please take this as comment that is
applicable to all led triggers, not just this one.

Thanks,
-- Shuah



\
 
 \ /
  Last update: 2012-07-05 19:21    [W:0.144 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site