lkml.org 
[lkml]   [2012]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mfd: arizona: convert to regmap_add_irq_chips
On 07/30/2012 12:03 PM, Mark Brown wrote:
> On Mon, Jul 30, 2012 at 11:05:08AM -0600, Stephen Warren wrote:
>> On 07/29/2012 02:38 PM, Mark Brown wrote:
>>> On Fri, Jul 27, 2012 at 01:02:56PM -0600, Stephen Warren wrote:
>
>>>> 1) regmap_add_irq_chips() calls regmap_add_irq_chip() with irq==0 rather
>>>> than -1, so in turn irq_domain_add_linear() is called rather than
>>>> irq_domain_add_legacy(). This change could be avoided by providing an
>>>> irq_bases array to regmap_add_irq_chips().
>
>>> This is a problem.
>
>> OK, can you explain why? Is the problem the difference between the two
>> types of IRQ domain? I would have assumed this was an internal detail of
>> the driver hence not an issue. I assume there's no issue with
>> known/static IRQ numbers, since both 0 and -1 end up dynamically
>> allocating the IRQ bases IIRC.
>
> We have GPIOs we might want to do interrupts on, if the API doesn't
> support providing a base we've got an issue.

I agree in general, but I don't see how this is a regression in this
change - the arizona pdata doesn't specify an IRQ base anywhere, and
hence the IRQ base is already dynamically allocated...

The (regmap-irq) API (in the patch I sent) does support optionally
specifying a base if you want, it's just that the arizona-irq.c patch I
sent didn't specify a base, since the original code didn't.


\
 
 \ /
  Last update: 2012-07-31 20:01    [W:0.240 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site