lkml.org 
[lkml]   [2012]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] xhci: EHCI/XHCI ports switching on Intense-PC.
Did you try disabling the wake on bits in the port status registers?  I
would prefer that solution if it works.

Otherwise this patchset looks fine. I'll work with the hardware folks
and see if this is exposed on other boards. Also, this is not a BIOS
bug, but a hardware issue that can be worked around in BIOS. So I might
edit your description on the first patch a bit when I submit it to Greg.

Sarah Sharp

On Mon, Jul 23, 2012 at 02:46:32PM +0300, Denis Turischev wrote:
> Intense-PC is Compulab's mini-desktop with Intel Panther Point
> chipset.
>
> Unconditional switchover to xHCI provided by function
> usb_enable_xhci_ports() leads to surprising results, after shutdown
> system powered-on again after a few seconds. On Windows power
> related problems were not observed. Switching back to EHCI solves
> the problem.
>
> The patch switches usb ports back to EHCI during xhci shutdown
> for Intense-PC.
>
> Signed-off-by: Denis Turischev <denis@compulab.co.il>
> ---
> drivers/usb/host/xhci.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index a979cd0..541efaa 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -26,6 +26,8 @@
> #include <linux/module.h>
> #include <linux/moduleparam.h>
> #include <linux/slab.h>
> +#include <linux/dmi.h>
> +#include "pci-quirks.h"
>
> #include "xhci.h"
>
> @@ -656,8 +658,20 @@ void xhci_stop(struct usb_hcd *hcd)
> */
> void xhci_shutdown(struct usb_hcd *hcd)
> {
> + struct pci_dev *pdev;
> + const char *brd_name;
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>
> + pdev = to_pci_dev(hcd->self.controller);
> +
> + if (usb_is_intel_switchable_xhci(pdev)) {
> + brd_name = dmi_get_system_info(DMI_BOARD_NAME);
> +
> + /* quirk for Compulab's Intense-PC board */
> + if (brd_name && strstr(brd_name, "Intense-PC"))
> + usb_disable_xhci_ports(pdev);
> + }
> +
> spin_lock_irq(&xhci->lock);
> xhci_halt(xhci);
> spin_unlock_irq(&xhci->lock);
> --
> 1.7.9.5
>


\
 
 \ /
  Last update: 2012-07-23 20:21    [W:0.364 / U:1.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site