lkml.org 
[lkml]   [2012]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Logitech HD Webcam C525 does not work when connected to USB 2 port, works on USB 3
From
Date
On Sat, 2012-06-30 at 22:12 -0400, Alan Stern wrote:
> On Sat, 30 Jun 2012, Frederik Himpe wrote:
>
> > Hello,
> >
> > I've got a Logitech HD Webcam C525 using the uvcvideo module and I use
> > Linux 3.5 RC4. When this camera is connected to a USB2 port, it does not
> > work most of the time. However it does work fine when connected to a USB
> > 3 port. In Windows it works on both ports.
>
> ...
>
> > Complete dmesg and lsusb -v output about a failed attempt (on USB 2
> > port) and a succeeded attempt (on USB 3) can be found on
> > http://artipc10.vub.ac.be/~frederik/webcam/
>
> A usbmon trace would be more helpful. Or perhaps a pair of traces, one
> for the USB-2 port and one for the USB-3 port. See the instructions in
> Documentation/usb/usbmon.txt.

OK, I created a usbmon trace both from the USB-2 port as the USB-3 port.
During the trace, I connected the USB webcam to the USB port and started
mplayer, which failed on USB-2 but worked fine on USB-3.

The two traces can be found here:
http://artipc10.vub.ac.be/~frederik/webcam/

Thanks!
--
Frederik Himpe <fhimpe@telenet.be>



\
 
 \ /
  Last update: 2012-07-01 15:21    [W:0.057 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site