lkml.org 
[lkml]   [2012]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Need help regarding parallel port interrupt in kernel 3.2
Hi,

> Problem here is, I am not getting interrupt or my interrupt handler is
> not executing. I wonder do we need to do any setting in BIOS for this
> interrupt? Or do we need to enable any flag during kernel compilation?

Hrmm, I might be mistaken, but probably only EPP (ECP?) are IRQ-based,
and plain-old SPP isn't?
If so, then that certainly would be a BIOS-side setup issue.
...which could be solved by making use of superiotool
for required configuration tasks instead (in many
cases at least).

HTH,

Andreas Mohr


\
 
 \ /
  Last update: 2012-06-02 22:41    [W:0.088 / U:1.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site