lkml.org 
[lkml]   [2012]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/1] TPM: STMicroelectronics ST33 I2C/SPI & ST19 I2C

Hi Mathias,

On Fri, Jun 01, 2012 at 08:06:00PM +0200, Mathias Leblanc wrote:
> * STMicroelectronics version 1.2.0, Copyright (C) 2010
> * STMicroelectronics comes with ABSOLUTELY NO WARRANTY.
> * This is free software, and you are welcome to redistribute it
> * under certain conditions.
>
> This is the driver for TPM chip from ST Microelectronics.

Please go through Documentation/SubmitChecklist and make use of
scripts/checkpatch.pl. This patch is far from meeting those standards.

> If you have a TPM security chip from STMicroelectronics working with
> an I2C/SPI, in menuconfig or .config choose the tpm driver on
> device --> tpm and activate the protocol of your choice before compiling
> the kernel.
> The driver will be accessible from within Linux.
>
> Tested on linux x86/x64 and beagleboard REV B & XM REV C
>
> Signed-off-by: Mathias Leblanc <mathias.leblanc@st.com>
> ---
> arch/arm/mach-omap2/board-omap3beagle.c | 58 ++
> drivers/char/tpm/Kconfig | 32 +-
> drivers/char/tpm/Makefile | 2 +
> drivers/char/tpm/tpm_stm_st19_i2c.c | 560 ++++++++++++++
> drivers/char/tpm/tpm_stm_st19_i2c.h | 52 ++
> drivers/char/tpm/tpm_stm_st33_i2c.c | 1200 +++++++++++++++++++++++++++++
> drivers/char/tpm/tpm_stm_st33_i2c.h | 76 ++
> drivers/char/tpm/tpm_stm_st33_spi.c | 1285 +++++++++++++++++++++++++++++++
> drivers/char/tpm/tpm_stm_st33_spi.h | 80 ++
> include/linux/i2c/tpm_stm_st19_i2c.h | 42 +
> include/linux/i2c/tpm_stm_st33_i2c.h | 48 ++
> include/linux/spi/tpm_stm_st33_spi.h | 46 ++
> 12 files changed, 3473 insertions(+), 8 deletions(-)
> create mode 100644 drivers/char/tpm/tpm_stm_st19_i2c.c
> create mode 100644 drivers/char/tpm/tpm_stm_st19_i2c.h
> create mode 100644 drivers/char/tpm/tpm_stm_st33_i2c.c
> create mode 100644 drivers/char/tpm/tpm_stm_st33_i2c.h
> create mode 100644 drivers/char/tpm/tpm_stm_st33_spi.c
> create mode 100644 drivers/char/tpm/tpm_stm_st33_spi.h
> create mode 100644 include/linux/i2c/tpm_stm_st19_i2c.h
> create mode 100644 include/linux/i2c/tpm_stm_st33_i2c.h
> create mode 100644 include/linux/spi/tpm_stm_st33_spi.h

Please break up the patch into at least 4 patches, the spi driver, the
i2c driver the build stuff and then the additions to the beagle board
code.

[cut]
>
> diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
> index a048199..7384c93 100644
> --- a/drivers/char/tpm/Kconfig
> +++ b/drivers/char/tpm/Kconfig
> @@ -5,6 +5,7 @@
> menuconfig TCG_TPM
> tristate "TPM Hardware Support"
> depends on HAS_IOMEM
> + depends on EXPERIMENTAL

This makes all TPM drivers experimental. Please move this into the
config options for your drivers specifically so that only they are
experimental.

> select SECURITYFS
> ---help---
> If you have a TPM security chip in your system, which
> @@ -16,17 +17,14 @@ menuconfig TCG_TPM
> obtained at: <http://sourceforge.net/projects/trousers>. To
> compile this driver as a module, choose M here; the module
> will be called tpm. If unsure, say N.
> - Notes:
> - 1) For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI
> + Note: For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI
> and CONFIG_PNPACPI.
> - 2) Without ACPI enabled, the BIOS event log won't be accessible,
> - which is required to validate the PCR 0-7 values.
>
> if TCG_TPM
>
> config TCG_TIS
> tristate "TPM Interface Specification 1.2 Interface"
> - depends on X86
> + depends on PNP

I don't think this is correct, PNP is optional for tis.

> ---help---
> If you have a TPM security chip that is compliant with the
> TCG TIS 1.2 TPM specification say Yes and it will be accessible
> @@ -35,7 +33,6 @@ config TCG_TIS
>
> config TCG_NSC
> tristate "National Semiconductor TPM Interface"
> - depends on X86

This needs to stay. Non-tis drivers are for 1.1 TPMs that have only
been tested on their arch AFAIK. Unless you can provide a Tested-by: for
this, I'll NACK it.

> ---help---
> If you have a TPM security chip from National Semiconductor
> say Yes and it will be accessible from within Linux. To
> @@ -44,7 +41,6 @@ config TCG_NSC
>
> config TCG_ATMEL
> tristate "Atmel TPM Interface"
> - depends on PPC64 || HAS_IOPORT

same as above.

> ---help---
> If you have a TPM security chip from Atmel say Yes and it
> will be accessible from within Linux. To compile this driver
> @@ -60,6 +56,26 @@ config TCG_INFINEON
> To compile this driver as a module, choose M here; the module
> will be called tpm_infineon.
> Further information on this driver and the supported hardware
> - can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
> + can be found at http://www.prosec.rub.de/tpm
> +
> +config TCG_ST33_I2C
> + tristate "STMicroelectronics ST33 I2C TPM with locality 0 & 4"

Is "with locality 0 & 4" relevent here?

> + depends on I2C
> + depends on GPIOLIB
> + ---help---
> + If you have a TPM security chip from STMicroelectronics working with
> + an I2C bus say Yes and it will be accessible from within Linux.
> + To compile this driver as a module, choose M here; the module will be
> + called tpm_stm_st33_i2c.
> +
> +config TCG_ST33_SPI
> + tristate "STMicroelectronics ST33 SPI"
> + depends on SPI
> + depends on GPIOLIB
> + ---help---
> + If you have a TPM security chip from STMicroelectronics working with
> + an SPI bus say Yes and it will be accessible from within Linux.
> + To compile this driver as a module, choose M here; the module will be
> + called tpm_stm_st33_spi.
>
> endif # TCG_TPM
> diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
> index ea3a1e0..8d3449f 100644
> --- a/drivers/char/tpm/Makefile
> +++ b/drivers/char/tpm/Makefile
> @@ -9,3 +9,5 @@ obj-$(CONFIG_TCG_TIS) += tpm_tis.o
> obj-$(CONFIG_TCG_NSC) += tpm_nsc.o
> obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o
> obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o
> +obj-$(CONFIG_TCG_ST33_I2C) += tpm_stm_st33_i2c.o
> +obj-$(CONFIG_TCG_ST33_SPI) += tpm_stm_st33_spi.o

EOL white space - please read Documentation/CodingStyle.

[cut]

> +
> +#include <linux/i2c/tpm_stm_st19_i2c.h>
> +
> +#include "tpm.h"
> +
> +#include "tpm_stm_st19_i2c.h"
> +
> +#ifdef DEBUG
> +#define FUNC_ENTER() pr_info("%s\n", __func__)
> +#else
> +#define FUNC_ENTER() do {} while (0)
> +#endif

Please remove FUNC_ENTER or replace with direct calls to pr_debug().

[cut]
> +static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
> + size_t count)
> +{
> + u32 ret = 0, i, size, ordinal;
> + struct i2c_client *client;
> +
> + FUNC_ENTER();
> +
> + if (chip == NULL)
> + return -EBUSY;
> +
> + if (count < TPM_HEADER_SIZE)
> + return -EBUSY;
> + client = (struct i2c_client *)pin_infos->client;
> +
> + ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));

ordinal looks to be set but unused.

[cut]
> +static const struct file_operations tpm_st19_i2c_fops = {
> + .owner = THIS_MODULE,
> + .llseek = no_llseek,
> + .read = tpm_read,
> + .unlocked_ioctl = tpm_stm_i2c_ioctl,
> + .write = tpm_write,
> + .open = tpm_open,
> + .release = tpm_release,
> +};

trousers doesn't need an ioctl path - do you have another user for it?
Otherwise please remove the ioctl stuff.

[cut]
> +//static DEFINE_SPINLOCK(tpm_stm_st33_lock);

Please remove any commented-out code.

[cut]
> +#define wait_for_serirq_timeout(chip, condition, timeout) \
> +({ \
> + unsigned long status = 2; \
> + struct i2c_client *client; \
> + struct st33zp24_platform_data* pin_infos; \
> +\
> + client = (struct i2c_client *) chip->vendor.iobase; \
> + pin_infos = client->dev.platform_data; \
> +\
> + status = _wait_for_interrupt_serirq_timeout(chip, timeout); \
> + if (!status) \
> + { \
> + status = -EBUSY; \
> + goto wait_end; \
> + } \
> + clear_interruption(client); \
> + if (condition) \
> + status = 1; \
> +\
> +wait_end: \
> + status;\
> +})

Please use do { } while (0) per Documentation/CodingStyle.

I'm gonna stop here for now. There's quite a bit of work TBD on these
drivers based on the kernel coding standards alone.

Kent



\
 
 \ /
  Last update: 2012-06-18 18:01    [W:0.524 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site