Messages in this thread Patch in this message | | | From | Roland Stigge <> | Subject | [PATCH v2 01/23] ARM: LPC32xx: Add NAND flash timing to PHY3250 board dts | Date | Thu, 14 Jun 2012 18:50:51 +0200 |
| |
This patch adds necessary NAND flash timings to the board specific dts file of the PHY3250 reference board of the LPC32xx SoC.
Signed-off-by: Roland Stigge <stigge@antcom.de> Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
--- arch/arm/boot/dts/phy3250.dts | 11 +++++++++++ 1 file changed, 11 insertions(+)
--- linux-2.6.orig/arch/arm/boot/dts/phy3250.dts +++ linux-2.6/arch/arm/boot/dts/phy3250.dts @@ -54,6 +54,17 @@ #address-cells = <1>; #size-cells = <1>; + nxp,wdr-clks = <14>; + nxp,wwidth = <40000000>; + nxp,whold = <100000000>; + nxp,wsetup = <100000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <40000000>; + nxp,rhold = <66666666>; + nxp,rsetup = <100000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + mtd0@00000000 { label = "phy3250-boot"; reg = <0x00000000 0x00064000>;
| |