lkml.org 
[lkml]   [2012]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH] 8250_pci: Remove duplicate struct pciserial_board
    Date
    pbn_exsys_4055 is the same thing as pbn_b2_4_115200 so replace it with
    the standard pattern.

    Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
    ---
    drivers/tty/serial/8250/8250_pci.c | 10 +---------
    1 file changed, 1 insertion(+), 9 deletions(-)

    diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
    index 28e7c7c..66e5909 100644
    --- a/drivers/tty/serial/8250/8250_pci.c
    +++ b/drivers/tty/serial/8250/8250_pci.c
    @@ -1887,7 +1887,6 @@ enum pci_board_num_t {
    pbn_panacom,
    pbn_panacom2,
    pbn_panacom4,
    - pbn_exsys_4055,
    pbn_plx_romulus,
    pbn_oxsemi,
    pbn_oxsemi_1_4000000,
    @@ -2393,13 +2392,6 @@ static struct pciserial_board pci_boards[] __devinitdata = {
    .reg_shift = 7,
    },

    - [pbn_exsys_4055] = {
    - .flags = FL_BASE2,
    - .num_ports = 4,
    - .base_baud = 115200,
    - .uart_offset = 8,
    - },
    -
    /* I think this entry is broken - the first_offset looks wrong --rmk */
    [pbn_plx_romulus] = {
    .flags = FL_BASE2,
    @@ -3193,7 +3185,7 @@ static struct pci_device_id serial_pci_tbl[] = {
    { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
    PCI_SUBVENDOR_ID_EXSYS,
    PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
    - pbn_exsys_4055 },
    + pbn_b2_4_115200 },
    /*
    * Megawolf Romulus PCI Serial Card, from Mike Hudson
    * (Exoray@isys.ca)
    --
    1.7.10.2


    \
     
     \ /
      Last update: 2012-05-28 22:41    [W:3.772 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site