Messages in this thread | | | Date | Fri, 18 May 2012 08:00:33 +0200 | From | Wolfgang Grandegger <> | Subject | Re: [PATCH] STA2X11 CAN: CAN driver for the STA2X11 board |
| |
On 05/17/2012 10:59 PM, Federico Vaga wrote: > Signed-off-by: Federico Vaga <federico.vaga@gmail.com> > Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> > Cc: Alan Cox <alan@linux.intel.com> > --- > drivers/net/can/Kconfig | 11 + > drivers/net/can/Makefile | 1 + > drivers/net/can/sta2x11_can.c | 1085 +++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 1097 insertions(+), 0 deletions(-) > create mode 100644 drivers/net/can/sta2x11_can.c
Thanks for your contribution. At a first glance, this driver looks similar to the pch_can and the c_can driver. It seems that a C_CAN based controller is used on that board as well. If that's true, it should be handled by the C_CAN driver. To get ride of the obsolete pch_can driver, I sent some time ago the patch "[RFC/PATCH] c_can: add driver for the PCH CAN controller":
http://marc.info/?t=132991563600003&r=1&w=4
I could serve as base of a generic c_can_pci driver.
Wolfgang.
| |