lkml.org 
[lkml]   [2012]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dma/amba-pl08x: check for terminal count status only
On 4/10/2012 2:23 AM, Linus Walleij wrote:
> For some reason I can't figure out we're reading the PL080_INT_STATUS
> register instead of PL080_TC_STATUS when checking for the terminal
> count. The PL080_INT_STATUS is a logical OR between the error and
> terminal count status register and may not report what we want it
> to, especially if there is an error and a terminal count at the same
> time and the former is not lowered in time for the check in the TC
> register. Make sure we read what we're actually interested in.
>
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Viresh Kumar <viresh.kumar@st.com>
> Cc: Alim Akhtar <alim.akhtar@gmail.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> drivers/dma/amba-pl08x.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
> index c301a8e..08589c6 100644
> --- a/drivers/dma/amba-pl08x.c
> +++ b/drivers/dma/amba-pl08x.c
> @@ -1615,7 +1615,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
> __func__, err);
> writel(err, pl08x->base + PL080_ERR_CLEAR);
> }
> - tc = readl(pl08x->base + PL080_INT_STATUS);
> + tc = readl(pl08x->base + PL080_TC_STATUS);
> if (tc)
> writel(tc, pl08x->base + PL080_TC_CLEAR);
>

Acked-by: Viresh Kumar <viresh.kumar@st.com>

--
viresh


\
 
 \ /
  Last update: 2012-04-10 05:41    [W:0.039 / U:0.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site